yves31 Posted May 28, 2016 Share Posted May 28, 2016 Hi, I used Jake's Guide to setup El Capitan on my Inspiron 5558 i5-4210U, HD4400, 1080p touch screen, dw1560 card. Everything works well except bluetooth. Bluetooth was enabled but failed find any device. Clover boot well, sleep ok. I used FakePCIID to make wifi working. Tried either BrcmPatchRam2 or BTFirmwareUploader for bluetooth. Both drivers enabled DW1560. I can get bluetooth on but it cannot find any device (android phone, keyboard, mouse...). No device cannot find the laptop either. Below is Bluetooth information from System Report and please help. Thanks, ------------------------------------ Apple Bluetooth Software Version: 4.4.4f4 17685 Hardware, Features, and Settings: Name: My MacBook Pro Address: A6-3D-8C-F6-3A-8C Bluetooth Low Energy Supported: Yes Handoff Supported: No Instant Hot Spot Supported: No Manufacturer: Broadcom Transport: USB Chipset: 20702A3 Firmware Version: v14 c5668 Bluetooth Power: On Discoverable: On Connectable: Yes Auto Seek Pointing: Off Remote wake: On Vendor ID: 0x0A5C Product ID: 0x216F HCI Version: 4.0 (0x6) HCI Revision: 0x1624 LMP Version: 4.0 (0x6) LMP Subversion: 0x220E Device Type (Major): Computer Device Type (Complete): Mac Portable Composite Class Of Device: 0x38010C Device Class (Major): 0x01 Device Class (Minor): 0x03 Service Class: 0x1C0 Auto Seek Keyboard: Off Services: Bluetooth File Transfer: Folder other devices can browse: ~/Public When receiving items: Accept all without warning State: Disabled Bluetooth File Exchange: Folder for accepted items: ~/Downloads When other items are accepted: Save to location When receiving items: Accept all without warning State: Disabled Bluetooth Internet Sharing: State: Disabled Incoming Serial Ports: Bluetooth-Incoming-Port: RFCOMM Channel: 3 Requires Authentication: No ------------------------------------ Link to comment Share on other sites More sharing options...
yves31 Posted May 28, 2016 Author Share Posted May 28, 2016 More information from dmesg | grep luetoo: BTFirmwareUploader :: Broadcom WiFi/BT combo Bluetooth controller found **** [iOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xd800 **** **** [broadcomBluetoothHostControllerUSBTransport][start] -- Completed (matched on Device) -- 0xd800 **** [iOBluetoothFamily][staticBluetoothTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xd800 [iOBluetoothHostController][start] -- completed **** [iOBluetoothHostControllerUSBTransport][interruptReadHandler] -- Received kIOReturnAborted error - retrying: 1 -- 0xd800 **** [iOBluetoothHostControllerUSBTransport][interruptReadHandler] -- failed to post another Read on the interrupt pipe -- error (0xE00002D8 (kIOReturnNotReady)) queueing next read. **** [iOBluetoothHostControllerUSBTransport][DoDeviceReset] -- Re-Enumeration is currently not permitted -- this = 0xd800 **** Bluetooth: Adaptive Frequency Hopping is not supported. [iOBluetoothHostController::setConfigState] calling registerService **** [iOBluetoothFamily][ProcessBluetoothTransportShowsUpActionWL] -- calling IOBluetoothFamily's registerService() -- 0x8040 -- 0x4a00 -- 0xd800 **** **** [iOBluetoothFamily][ProcessBluetoothTransportShowsUpActionWL] -- Connected to the transport successfully -- 0x8040 -- 0x4a00 -- 0xd800 **** Bluetooth Firmware Uploader v3.1 Copyright © EMlyDinEsH <www.osxlatitude.com> 2012-2016. BTFirmwareUploader :: Broadcom WiFi/BT combo Bluetooth controller found **** [iOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xd800 **** **** [broadcomBluetoothHostControllerUSBTransport][start] -- Completed (matched on Device) -- 0xd800 **** [iOBluetoothFamily][staticBluetoothTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xd800 **** [broadcomBluetoothHostController][setupController] -- disableHIDEmulation() failed -- result = 0xE00002BC (kIOReturnError) -- retry 0 time(s) -- 0x1200 **** [iOBluetoothHostController::setConfigState] calling registerService **** [iOBluetoothFamily][ProcessBluetoothTransportShowsUpActionWL] -- calling IOBluetoothFamily's registerService() -- 0x8040 -- 0x4a00 -- 0xd800 **** **** [iOBluetoothFamily][ProcessBluetoothTransportShowsUpActionWL] -- Connected to the transport successfully -- 0x8040 -- 0x4a00 -- 0xd800 **** dmesg | grep BT Setting BTCoex Profile: band:8 Setting BTCoex Profile: band:2 Setting BTCoex Config: enable_2G:1, profile_2g:0, enable_5G:1, profile_5G:0 **** [iOBluetoothHostControllerUSBTransport][interruptReadHandler] -- Received kIOReturnAborted error - retrying: 1 -- 0xd800 **** [iOBluetoothHostControllerUSBTransport][interruptReadHandler] -- failed to post another Read on the interrupt pipe -- error (0xE00002D8 (kIOReturnNotReady)) queueing next read. **** [iOBluetoothHostControllerUSBTransport][DoDeviceReset] -- Re-Enumeration is currently not permitted -- this = 0xd800 **** BTFirmwareUploader :: ProductID 0x216f, VendorID 0xa5c BTFirmwareUploader :: Broadcom WiFi/BT combo Bluetooth controller found BTFirmwareUploader :: Firmware already updated, skipping. **** [iOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xd800 **** **** [broadcomBluetoothHostControllerUSBTransport][start] -- Completed (matched on Device) -- 0xd800 **** Setting BTCoex Config: enable_2G:1, profile_2g:0, enable_5G:1, profile_5G:0 Setting BTCoex Config: enable_2G:1, profile_2g:0, enable_5G:1, profile_5G:0 Link to comment Share on other sites More sharing options...
Recommended Posts