[HELP] Having a lot of issues installing El Capitan on E5440

[Smakced]

I've managed to install El Capitan on my Latitude E5440. The only thing I've gotten to work so far is the ethernet. I tried looking at tutorials to get the Intel HD 4400 graphics to work but nothing was successful, only thing I did was make it display the name of my graphics in the about this mac window. And I've also tried pretty much every tutorial on this site for the E5440 and still nothing is working. Please help me.

[Jake Lo]

Are using clover or enoch Chameleon?

Attach what you have so far.

[Smakced]

I'm using Clover

cloverefi.zip

[Jake Lo]

Ok, replace these to your EFI/Clover partition, make a backup if you like

Then copy all kexts in /EFI/Clover/Kexts/Other/LE to /Library/Extensions

Click ok on the popup error. Open terminal and enter the following commands

      sudo chmod -Rf 755 /L*/E*

      sudo chown -Rf 0:0 /L*/E*

      sudo touch -f /L*/E*

      sudo chmod -Rf 755 /S*/L*/E*

      sudo chown -Rf 0:0 /S*/L*/E*

      sudo touch -f /S*/L*/E*

      sudo kextcache -Boot -U /

 

Reboot

E5440_Smakced.zip

[Smakced]

Ok I've done that now what do I do from here?

[Jake Lo]

Reboot and test if everything is working

[Smakced]

Still nothing is working :/ I did exactly what you said

[Jake Lo]

You need to restore any vanilla kexts you might have manually patched or installed or removed. i.e. AppleHDA, AppleIntelFrameBufferAzul, AppleIntelHD5000Graphics, etc.

[dlonewolf86]

Which Kernel do I need for the install and boot? I have a haswell i5

[Jake Lo]

Kernel?

Are you on clover or Chameleon?

For Chameleon, you'll need the patched kernel to bypass the auto reboot

For Clover, you just need to have KernelPm enabled in Config.plist.