Jump to content

[Solved...almost] Optiplex 3040 FULLY working!


sebus

Recommended Posts

IntelGraphicsFixup.kext is an old kext. Whatevergreen.kext replaces it (it includes IntelGraphicsFixup.kext)

Whatevergreen needs Lilu.kext to work

 

you just need to inject Intel and set ig-platform-id to 0x19120000 (you can also try 0x193B0005)

Make sure you have increased DVMT beforehand

 

add the following ACPI patches

change XHCI to XHC

change XHC1 to XHC

change SAT0 to SATA

 

the remaining ACPI patches will be done automatically by Whatevergreen

 

Also, the problem with the tint is that your display must be unproperly identified (you need EDID fix)

 use https://gist.github.com/adaugherity/7435890 or hackintool which includes that patcher

Link to comment
Share on other sites

7 hours ago, anatharias said:

IntelGraphicsFixup.kext is an old kext. Whatevergreen.kext replaces it (it includes IntelGraphicsFixup.kext)

Whatevergreen needs Lilu.kext to work

Thank you. I resolved the problem with blue/red tin but will try your solution to see if it is more effective.

Another small problem with video: I can not drive the display higher than 2732x1536 resolution (tried on 4K TV Samsung 6100MU and 2K monitor Dell U2515H, using both HDMI and DisplayPort), that mean I can not get HiDPI mode higher than 1366x768. 

----

Edit: Tested with Whatevergreen, the problem is resolved this way, too. However, the problem with HiDPI resolution is still persist.

Link to comment
Share on other sites

Hi all :)

I Try to install Mojave (or H-Sierra) on Optiplex 3040 4Gb SSD Samsung EVO 850 SSD with no success.

I Tried with most tutorials, in UEFI or Legacy, USB key in GPT or MBR format.

The USB key is on USB2 port.

Clover is booting and when I select Mac OS install, the installer is halted after some lines ended by +++++++++++ (verbose mode)

The install disk is mounted only if HFSPlus.efi is on /Clover/drivers64UEFI/ directory

The config.plist is the file find on this topic.

 

My last experience with Hackintosh goes back to 2007 on latitude E6400 ... lol

Please, what's wrong on my setup?

 

Thank in advance for your help :)

 

 

Edit: 

The 3040 is micro form factor.

i try my key on optiplex 7010 tower, the installer display a nice KP after +++++ Line.

IMG_0593.jpg

Link to comment
Share on other sites

Thanx for you reply.

The Clover drivers (drivers64UEFI) are:

  • ApfsDriverLoader-64.efi
  • AptioMemoryFix-64.efi
  • AudioDxe-64.efi
  • DataHubDxe-64.efi
  • FSInject-64.efi
  • HFSPlus.efi
  • NvmExpressDxe-64.efi
  • OsxAptioFixDrv-64.efi
  • SMCHelper-64.efi

And in drivers64:

  • ApfsDriverLoader-64.efi
  • AptioMemoryFix-64.efi
  • DataHubDxe-64.efi
  • HFSPlus.efi

Is this setup good?

 

Link to comment
Share on other sites

Thanx Jake,

I deleted the OsxAptioFixDrv-64.efi but I've the same issue: on 3040, the installer is stopped after the ++++++ line :(

No Way, I Tried some config.plist. 

The processor on this 3040 is a Core i3 6100 3.2GHz.

My SMBIOS config is iMac17,1 (Skylake) 

Is this CPU supported? 

Link to comment
Share on other sites

×
×
  • Create New...