Jump to content

E5470: Help installing El Capitan


mdub

Recommended Posts

  • Moderators

Does your system have 2 HDMI port? Your IOReg shows both AppleIntelFramebuffer@1 and @2 set to HDMI.

Download Clover Configurator 4.38, open your Config.plist and change the smbios to MBP13,2

MBP12,1 is for Broadwell. At the time I wrote the guide, there's no Skylake Smbios available, but it is now.

Link to comment
Share on other sites

SMBios 13,2 does not work on El Capitan 10.11, say "version of mac osx is not supported" on boot. I tried different SMBios but no luck so far.
 
For the framebuffer, are there any chance because I use your E7470 (HDMI + DP) config.plist
 
post-78663-0-05162800-1485251125_thumb.png

Link to comment
Share on other sites

I changed to MB9,1 and disable HDMI #2 but it does not work.

 

I found a work around this issue: plugin monitor to HDMI, close laptop lid and open it again. Now both internal LCD and external LCD work. There are flickers on external LCD occasionally but it seems workable.

 

Could it be issue related to HDMI audio because I can not see it on SysProfiler?

Link to comment
Share on other sites

Stick with HDMI #2 enabled as that's the port for you HDMI. You never confirm if you have a Displayport.

Update to latest FakePCIID + FakePCIID_Intel_HDMI_Audio + FakePCIID_Intel_HD_Graphics

 

Does HDMI Audio work?

 

No, my E5470 does not have Display Port. It has a HDMI port and a VGA port.

 

I've updated to latest FakePCIID + FakePCIID_Intel_HDMI_Audio + FakePCIID_Intel_HD_Graphics

Here is my /L/E folder:

post-78663-0-10081700-1485330231_thumb.png

 

HDMI Audio not found in SysProfile

post-78663-0-18037300-1485330004_thumb.png

 

I run "cat /var/log/system.log | HDMI"

Jan 25 14:31:43 MacBookPro com.apple.kextd[44]: FakePCIID_Intel_HDMI_Audio.kext has no Info.plist file.
Link to comment
Share on other sites

×
×
  • Create New...