Dell latitude 7480 with Thunderbolt TB16

[Jake Lo]

Hmm, strange. Let me check the patching again. 

 

Update:

Try replacing with this DSDT. The rest stays the same

DSDT.aml.zip

[seeker_pl]

Still the same. No keyboard or trackpad support. 

[seeker_pl]

macOS updated to 10.12.6. I tried to recreate EFI folder using files you provide, but still no keyboard or touchpad support.

[Jake Lo]

Can you try using the kexts from E7x70 but replace the DSDT/SSDT and Config file?

[seeker_pl]

I used kext from E7470_BIOSv10.15.4 and config.plist and acpi folder from your previous post. Still no keyboard or trackpad.

 

Kexts in LE:

 

AppleBacklightInjector.kext

AppleHDA_ALC293.kext
BrcmFirmwareRepo.kext
BrcmPatchRAM2.kext
DisableTurboBoostBattery.kext
EAPDFix.kext
FakePCIID_Intel_HD_Graphics.kext

 

kexts in EFI\Clover\kexts\Other

 

ACPIBatteryManager.kext
ApplePS2Controller.kext
FakeSMC.kext
IntelMausiEthernet.kext
IOAHCISerialATAPI_Injector.kext
SATA-100-series-unsupported.kext
USBInjectAll.kext

[Hervé]

FakePCIID_Intel_HD_Graphics.kext useless without Fake_PCIID.kext... Just like VoodooHDA without AppleHDADisabler.

[seeker_pl]

It should be on my kext list. Fake_PCIID.kext installed together with FakePCIID_Intel_HD_Graphics.kext.

I try to modify my ACPI table, but still no luck no keyboard or mouse. 

 

For Skylake processor, it's better to use HWP Enable, or ssdtPRGen? For now, both are not working, due to the wrong DSDT?

System information: Mac OS X 10.12.6 (16G29)
Brandstring: "Intel(R) Core(TM) i7-6600U CPU @ 2.60GHz"

Version: models.cfg v171 / Skylake.cfg v195


Scope (_PR_) {222 bytes} with ACPI Processor declarations found in DSDT (ACPI 1.0 compliant)
Generating ssdt.dsl for a 'MacBookPro13,' with board-id [Mac-473D31EABEB93F9B]
Skylake Core i7-6600U processor [0x406E3] setup [0x0705]
With a maximum TDP of 15 Watt, as specified by Intel
Number logical CPU's: 4 (Core Frequency: 2600 MHz)
Number of Turbo States: 8 (2700-3400 MHz)
Number of P-States: 30 (500-3400 MHz)
Adjusting C-States for detected (mobile) processor
Injected C-States for CPU0 (C1,C3,C6,C7)
Injected C-States for CPU1 (C1,C2,C3,C6,C7)
Warning: Model identifier (MacBookPro13,) not found in..: /S*/L*/CoreServices/PlatformSupport.plist

Warning: 'cpu-type' may be set improperly (0x0705 instead of 0x0905)
	 - Clover users should read https://clover-wiki.zetam.org/Configuration/CPU#cpu_typeWarning: board-id [Mac-473D31EABEB93F9B] and model [MacBookPro13,] mismatch – check SMBIOS data

[Jscout]

HI guys I have E7470 with the i7 6600u 16gb 1tb 850EVO and a new 7480 with i7 7660u 32gb and 1tb 960EVO. I would like to install Hackintosh on the 7480 as I already have Ubuntu 16.04 and Fedora 26 and Windows 7 on E7470. which guide should I follow for the 7480. Also both my devices are touchscreens and have wwan cards and intel wlan cards. please advise me if i should just use the E7470 for the hackintosh or if I can use the 7480, other the my processors being the i7's and ssd's and ram my 7480 as same spec as original poster.....  I have successfully done hackintosh before on older setups, but its been a few years thanks for your help. 

 

Jesse

[seeker_pl]

Hi,

Both Bootpacks are for Skylake processor. Test yourself. I had no touchscreen in my Dell laptops, so it's hard to say, probably DSDT patching will be necessary.

Do you mean WWAN or WLAN cards? You need M.2 card for WLAN for e7470 or 7480. Check for DW1560 or DW1830. 

[Jscout]

Thanks for your reply and WWAN is a LTE modem basically installed into the M.2 Slot. I already had the assumption that i would need an external wireless device as i really like the 8625 Wlan its fast as hell so i don't wanna switch it out... i pretty much assume that my LTE won't be working for this install.... either way thanks much for reply i will be trying this out over the weekend i will post back with results.