Jump to content

Dell Latitude E6430 / E6230 Intel (Mavericks)


Jake Lo

Recommended Posts

  • Moderators

E6x30 with Intel HD 4000

E6x30.jpgE6230.jpg

Credits:

Special thanks to myHack (conti)

EMlyDinEsH for the patched DSDT and AppleHDA

Zenith432 for GenericUSBXHCI - USB 3.0

qwerty12 for DisableIntelTurboBoost for Power Management

And everyone who contributed to get Intel HD 4000 QE/CI

 

Specs:

BIOS A11 | i5-3320M 2.6GH vPro| 8GB DDR3 | Intel HD 4000, 1366x768 | Rebranded Dell DW1510 | Mavericks GM

 

What's working:

Full QE/CI

Keyboard and mouse (no multitouch) - For multitouch, follow this.

Audio - thanks to EMlyDinEsH for the patch

HDMI - Video and Audio

Sleep - thanks to EMlyDinEsH for the DSDT/SSDT files

Wifi - replaced Intel Card with DW1510 (rebranded)

LAN (AppleIntelE1000)

USB 3.0 (GenericUSBXHCI)

Webcam (OOB)

 

Let's get started...

I use the myhack method for this build, so follow instructions to build your USB installer, set BIOS settings and run the OSX Installation from here http://myhack.sojugarden.com/guide/

For best results, set BIOS to default, apply it and then  go back to set Sata Operation to AHCI
  1. After creating your USB installer, run myHack again
  2. Select Install Extra and point to the Extra folder attached (extract it first) Extra.zip
  3. Boot up system with USB installer disk with the -v switch (use USB 2.0 port on the left, USB 3.0 ports don't always work)
  4. Format the HDD per instruction from myHack
  5. Select "Use my Own" when prompt and point to the Extra folder in the root of the USB installer drive
  6. When prompt to remove problematic kexts, select Yes, Yes, No
  7. If you get an Install Failed error towards the end, that's fine, restart the computer. Remove the USB installer drive
  8. Complete the customization ( if you get Invalid Partition Table during boot - just hit enter - find fix under Fixes below)
  9. That's it, there's no #9
 

 

:excl: Important

:excl:  :excl: BIOS UPDATE

  • E6430: Don't update BIOS to version A13, causes screen artifacts!
  • E6230: Don't update BIOS to version A12, causes screen artifacts!

Fixes:

  • If you encounter "Invalid Partition Table" after the first reboot, just hit the Enter key to continue. To completely remove that error, launch myHack and select Install Chameleon

 

 

post-1549-0-58690800-1380647467.png

  • If you encounter error above when playing DVD Player,

         replace zip.gif  DVDPlayback.framework.zip   2.86MB   13 downloads

         in System/Library/Frameworks. Don't forget to backup yours first.

 

JL

  • Like 3
Link to comment
Share on other sites

  • Moderators

Updates

 

 

  • Thanks to Pokenguyen's discovery, now Sleep/Wake on LID works! 

         DSDT-E6230.aml.zip 

         DSDT-E6430.aml.zip

 

  • Mavericks Update 10.9.1

STATUS:

GOOD

UPDATE METHOD:

APP STORE/SYSTEM UPDATE

MODIFICATIONS NEEDED:

NONE

 

  • Mavericks Update 10.9.2

STATUS:

GOOD

UPDATE METHOD:

APP STORE/SYSTEM UPDATE

MODIFICATIONS NEEDED:

Need new patched AppleHDA AppleHDA.kext.zip

          Install latest Chameleon r2377 and add to org.chameleon.boot.plist
           <key>HDAEnabler</key>       
           <string>Yes</string>

 

  • Mavericks Update 10.9.3

STATUS:

GOOD

UPDATE METHOD:

APP STORE/SYSTEM UPDATE

MODIFICATIONS NEEDED:

Updated AppleHDA (but not needed - version from 10.9.2 works fine)

AppleHDA.kext.zip

 

  • Mavericks Update 10.9.4

STATUS:

GOOD

UPDATE METHOD:

APP STORE/SYSTEM UPDATE

MODIFICATIONS NEEDED:

AppleHDA.kext.zip

Old patched FB loses QE/CI, replace with new one below

AppleIntelFramebufferCapri.zip

 

  • Mavericks Update 10.9.5

STATUS:

GOOD

UPDATE METHOD:

APP STORE/SYSTEM UPDATE

MODIFICATIONS NEEDED:

None

  • Like 8
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...