Jump to content

Strange happenings after EDP


ssprod

Recommended Posts

Herve, For the initial MyHack install, I used whatever version MyHack installed. It booted without issue, however correct me if I'm wrong.. once I run EDP, do I not just let it do it's thing completely? I waited until MyFix completed then rebooted.. this is where the problem starts, upon reboot. Thanks. 

Link to comment
Share on other sites

  • Administrators

Ok, well this default EDP build should be considered totally outdated. Many of those kexts can be either removed or replaced.

 

Can you post the contents of the Chameleon boot plist + SMBIOS plist that you have in Extra? 'just trying to find out where the problem is really...

Link to comment
Share on other sites

Sure can Herve, and thanks for the help... frustrating, I've done this every few months with no issues.  

 

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<plist version="1.0">

<dict>

<key>EthernetBuiltIn</key>

<string>Yes</string>

<key>ForceHPET</key>

<string>Yes</string>

<key>Graphics Mode</key>

<string>1280x800x32</string>

<key>GraphicsEnabler</key>

<string>Yes</string>

<key>Kernel</key>

<string>mach_kernel</string>

<key>Kernel Flags</key>

<string>npci=0x2000</string>

<key>SystemType</key>

<string>2</string>

<key>Theme</key>

<string>Default</string>

<key>Timeout</key>

<string>2</string>

<key>USBBusFix</key>

<string>Yes</string>

<key>UseKernelCache</key>

<string>Yes</string>

<key>arch</key>

<string>i386</string>

</dict>

</plist>

 
 

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<plist version="1.0">

<dict>

<key>EDPmodel</key>

<string>Dell_Latitude_D630-nvidia</string>

<key>SMbiosdate</key>

<string>03/05/08</string>

<key>SMbiosvendor</key>

<string>Apple Inc.</string>

<key>SMbiosversion</key>

<string>MB31.008E.B02.0803051832</string>

<key>SMboardmanufacter</key>

<string>Apple Inc.</string>

<key>SMboardproduct</key>

<string>Mac-F22788C8</string>

<key>SMboardversion</key>

<string>PVT</string>

<key>SMfamily</key>

<string>MacBook</string>

<key>SMmanufacter</key>

<string>Apple Inc.</string>

<key>SMmanufacturer</key>

<string>Apple Inc.</string>

<key>SMmemtype</key>

<string>19</string>

<key>SMproductname</key>

<string>MacBook3,1</string>

<key>SMserial</key>

<string>CK827834Y51</string>

<key>SMsystemversion</key>

<string>1.0</string>

</dict>

</plist>

 
Link to comment
Share on other sites

  • Administrators

Mmm, I can't see anything obvious that'd be out of the norm. Here is an updated and complete /Extra for your D630 nVidia. You would only add a kext if a particular piece of hardware specific to your laptop was not already covered.

 

Install it with myHack (keep a backup of your existing /Extra) and do check the version of Chameleon bootloader you currently have. I would recommend you use the latest available through the Chameleon Wizard, i.e. r2377 or r2378 at time of writing.

 

Extra_D630NV_Mav10.9.zip

 

EDIT - 9 Aug 2014

-----------------------

Pack modified with original unedited DSDT in order to suit all D630 laptops.

Link to comment
Share on other sites

×
×
  • Create New...