Jump to content

Dell e6330 AppleIntelCPUManagament kernel panic


nelight

Recommended Posts

  • Moderators

You probably don't have a DSDT file.

Download the attached. 

Run ssdtprGen.sh from the terminal, this will generate an SSDT.aml for you.

Copy it from /Extra to EFI/Clover/ACPI/Patched

Place DSDT.aml to EFI/Clover/ACPI/Patched

Copy VoodooPS2Controller.kext in EFI/Clover/Kexts/Other, remove ApplePS2Controller.kext

Install AppleHDA_IDT.kext to /S/L/E with kextwizard.

Reboot.

For touchpad scrolling, try 1 finger side scrolling. For 2 finger scrolling, you might need to leave a finger gap between your fore finger and middle finger. For clicking, go to preference to enable.

E6330_kexts.zip

Link to comment
Share on other sites

pc35:E6330_kexts sideyourspirit$ sudo ./ssdtPRGen.sh 


ssdtPRGen.sh v0.9 Copyright (c) 2011-2012 by † RevoGirl
             v6.6 Copyright (c) 2013 by † Jeroen
             v14.0 Copyright (c) 2013-2015 by Pike R. Alpha
-----------------------------------------------------------
Bugs > https://github.com/Piker-Alpha/ssdtPRGen.sh/issues <

System information: Mac OS X 10.10.3 (14D136)
Brandstring 'Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz'

xxd: /tmp/DSDT.aml: No such file or directory

Warning: No ACPI Processor declarations found in the DSDT!
	 Using assumed Scope (\_SB) {}

Generating ssdt.dsl for a 'MacBookPro9,2' with board-id [Mac-6F01561E16C75D06]
Ivy Bridge Core i3-3120M processor [0x306A9] setup [0x0903]
With a maximum TDP of 35 Watt, as specified by Intel

Warning: Low Frequency Mode is 0 (unknown/unconfirmed)
         Now using 1200 MHz for Mobile processor

Number logical CPU's: 4 (Core Frequency: 2500 MHz)
Number of Turbo States: 0
Number of P-States: 14 (1200-2500 MHz)
Adjusting C-States for detected (mobile) processor
Injected C-States for CPU0 (C1,C3,C6,C7)
Injected C-States for CPU1 (C1,C2,C3)
Warning: 'cpu-type' may be set improperly (0x0903 instead of 0x0703)

IASL not found. Downloading iasl...
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 1132k  100 1132k    0     0   251k      0  0:00:04  0:00:04 --:--:--  251k
Done.

Intel ACPI Component Architecture
ASL Optimizing Compiler version 20130117-64 [Jan 19 2013]
Copyright (c) 2000 - 2013 Intel Corporation

ASL Input:     /Users/sideyourspirit/Desktop/ssdt.dsl - 255 lines, 7326 bytes, 46 keywords
AML Output:    /Users/sideyourspirit/Desktop/ssdt.aml - 1418 bytes, 16 named objects, 30 executable opcodes

Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 0 Optimizations

Do you want to copy /Users/sideyourspirit/Desktop/ssdt.aml to /Extra/ssdt.aml? (y/n)? y
Creating temporarily mount point: /Volumes/EFI
Mounting EFI partition...
mount_hfs: Invalid argument
cp: /Extra/ssdt.aml: No such file or directory
umount: /Volumes/EFI: not currently mounted
Do you want to open ssdt.dsl (y/n)? y
pc35:E6330_kexts sideyourspirit$ 

then I mount EFi partition and run it one more time:

ssdtPRGen.sh v0.9 Copyright (c) 2011-2012 by † RevoGirl
             v6.6 Copyright (c) 2013 by † Jeroen
             v14.0 Copyright (c) 2013-2015 by Pike R. Alpha
-----------------------------------------------------------
Bugs > https://github.com/Piker-Alpha/ssdtPRGen.sh/issues <

System information: Mac OS X 10.10.3 (14D136)
Brandstring 'Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz'

xxd: /tmp/DSDT.aml: No such file or directory

Warning: No ACPI Processor declarations found in the DSDT!
	 Using assumed Scope (\_SB) {}

Generating ssdt.dsl for a 'MacBookPro9,2' with board-id [Mac-6F01561E16C75D06]
Ivy Bridge Core i3-3120M processor [0x306A9] setup [0x0903]
With a maximum TDP of 35 Watt, as specified by Intel

Warning: Low Frequency Mode is 0 (unknown/unconfirmed)
         Now using 1200 MHz for Mobile processor

Number logical CPU's: 4 (Core Frequency: 2500 MHz)
Number of Turbo States: 0
Number of P-States: 14 (1200-2500 MHz)
Adjusting C-States for detected (mobile) processor
Injected C-States for CPU0 (C1,C3,C6,C7)
Injected C-States for CPU1 (C1,C2,C3)
Warning: 'cpu-type' may be set improperly (0x0903 instead of 0x0703)

Intel ACPI Component Architecture
ASL Optimizing Compiler version 20130117-64 [Jan 19 2013]
Copyright (c) 2000 - 2013 Intel Corporation

ASL Input:     /Users/sideyourspirit/Desktop/ssdt.dsl - 255 lines, 7326 bytes, 46 keywords
AML Output:    /Users/sideyourspirit/Desktop/ssdt.aml - 1418 bytes, 16 named objects, 30 executable opcodes

Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 0 Optimizations

Do you want to copy /Users/sideyourspirit/Desktop/ssdt.aml to /Extra/ssdt.aml? (y/n)? y
cp: /Extra/ssdt.aml: No such file or directory
Do you want to remove the temporarily mount point (y/n)? y
rm: /Volumes/EFI: No such file or directory
Do you want to open ssdt.dsl (y/n)? y
pc35:E6330_kexts sideyourspirit$ 

Then I created /Extra folder (it was not there) run it one more time and got the ssdt.aml file.

 

The thing is, I don't have any kexts in EFI/Clover/ACPI/Patched

There are folders from 10.6 to 10.10 and 'Other' folder but there are empty.

I place the vodoo kext there and install the apple hda

 

Side-scrolling is not working, and I have:

Settings > Touchpad > "Touchpad not found"

 

After that, actually nothing changed, besides the windows/supper key and Alt key are now both command keys (I cannot write letter using right alt+letter like before [i mean after installing kexts and before clover])

Edited by nelight
Link to comment
Share on other sites

  • Moderators

I see what you did. You installed the previous kexts I send to /S/L/E instead of placing then in EFI/Clover/Kexts/Other. That's okay. Go to /S/L/E, locate ApplePS2Controller.kext and delete it. Repair permission and rebuild cache once again. You didn't mention DSDT, so make sure to copy that to EFI/Clover/ACPI/Patched as well as the SSDT.

Link to comment
Share on other sites

×
×
  • Create New...