Leaderboard

CLOVER Specifications: Intel 6th generation Core i5-6200U 2.3 GHz, up to 2.8 GHz with Intel Turbo Boost Technology, 3 MB cache, 2 cores Integrated Intel HD Graphics 520 Non touch 35.6 cm (14 in) diagonal LED backlight FHD Slim eDP SVA Anti-glare (1920 x 1080) with camera System can be configured with a hard drive and M.2 SSD drive / NVMe 8192 MB total system memory (8192 MB x 1) Up to 32 GB - DDR4 PC4-17000 (Transfer rates up to 2133 MT/s) Intel Wireless-AC 3165 802.11 a/b/g/n/ac (1 x 1) WiFi and Bluetooth 4.0 combo (non-vPro) HP Module with NXP NFC Controller NPC100 Intel Ethernet Connection I219-V 10/100/1000 Ethernet Synaptics Touchpad Audiio Conexant CX20724 - VendorID: 0x14f150f4 Integrated HD Webcam (1) USB 3.1 Gen 1 charging (1) USB 3.1 Gen 1 (1) USB Basic Type-C (1) DisplayPort (1) VGA (1) RJ-45/Ethernet (1) Docking connector (1) Headphone/microphone combo (1) AC (1) External SIM (1) SD media card reader, supports SD, SDHC, SDXC Working: full graphics acceleration on Intel HD520 iGPU, including brightness control (F5 and F6) multi-display with DisplayPort OOB, VGA audio, microphone input and headset output (F8 and F9) - Mute button not working GigEthernet LAN connection wireless and bluetooth with any compatible card (a DW1560 in my case, no Whitelisting) left and right USB ports including USB Type-C integrated webcam (OOB) CPU power management sleep (Lid, Energy Saver settings, Apple menu, PWR button) & wake (Lid, PWR button) battery management (with SMCBatteryManager v1.0) keyboard and touchpad (with VoodooPS2Controller v1.9.2) keyboard backlight (Fn + F3) touchpad including tap-to-click, scrolling, mouse buttons (can be disable with prt scr key) Partially working: RTS522a microSD card reader (read-only mode) - after sleep, need to eject and reinsert New updated kext allow read and write Not working: TrackStick Finger Print reader Wifi button Mute button (grayed out) Fixed with AppleALC version 1.6.1 by Human7900 BIOS Settings: Installation: Follow the standard UEFI Clover guide Replace contents to /EFI/Clover after installing Clover HP840_G3.zip Updates: Added VoodooSMBUS for better touchpad experience, most gestures work! HP840G3_BetterTouchpad.zip Add HPFanReset.efi to /EFI/Clover/drivers/UEFI HPFanReset.efi.zip Post install: Install CsmVideoDxe.efi to fix stretched Clover boot screen using Clover Configurator. The version from Clover installer does not work. Change BIOS settings for Secure Boot Configuration Configure Legacy Support and Secure Boot = Legacy Support Disable and Secure Boot Disable Note: Files tested on Catalina, Mojave, High Sierra, El Capitan ( Just need to add boot arg -no_compat_check) Credits: Rehabman for hot patched files Sinetek /Cholonam for Sinetek-rtsx (SD Card reader) Leo-laps / 1Revenger1 for VoodooSMBUS & VoodooRMI

OPENCORE Supports Mojave to Monterey Follow BIOS Configuration above Installation: Download macOS Monterey / Big Sur / Catalina / Mojave app Format a 16GB USB drive (GUID / Extended (Journaled)) Create USB Installer with createinstallmedia command Download attached folder and rename as EFI Mount EFI partition and add EFI folder Configure BIOS setting according to guide Boot with USB installer Complete installation Post Installation: Mount EFI partition of newly installed drive and copy EFI folder over Update / Change in Config.plist under PlatformID->Generic (use genSMBIOS or Hackintool.app) MLB, ROM, SystemSerialNumber and SystemUUID Resources: https://dortania.github.io/OpenCore-Install-Guide/ https://github.com/VoodooSMBus/VoodooRMI https://github.com/OpenIntelWireless/itlwm https://github.com/cholonam/Sinetek-rtsx https://github.com/0xFireWolf/RealtekCardReader/releases Updated to OC 0.8.5 Note: Config is set for Broadcom DW1830 If you have Intel, rename Config-IntelWifi to Config.plist Multiboot from OC picker is also working! Note2: When using OC 0.7.4/0.7.6 bootpack, if disk is not detected Set in Config file under UEFI/APFS MinDate=20200306 and MinVersion=1412101001000000 for Catalina Set in Config file under UEFI/AFPS MinDate=20190820 and MinVersion=945275007000000 for Mojave For OC 0.7.6, if you're booting Catalina, you'll need to replace Lilu.kext with v1.5.7, v1.5.9 causes dependency for RealtekCardReaderFriend.kext HP840G3_OC_0.8.5.zip HP840G3_OC_0.7.9.zipHP840G3_OC_0.7.6.zipHP840G3_OC_0.7.4.zip HP840G3_OC_0.6.8.zip HP840G3_OC_0.6.3.zip