Jump to content

Smart Tek Peru

Members
  • Posts

    12
  • Joined

  • Last visited

Posts posted by Smart Tek Peru

  1. 18 hours ago, Hervé said:

    > Moving to the correct Dell support section. Please make every effort to post in the correct sections in the future. Guides sections are clearly labelled "No support here"...

    Sorry about that, I'll be more careful next time.

     

    I followed your instructions (1,2, 3( not sure if the com.apple.XXXXX syntax has any negative effect)) and updated my config.list file (see attached). Now there are no glitches when turning the laptop off. No bios downgrade was not required. Thank you for your help.

    There's one small glitch when turning it on (it lasts less than a second), any ideas why this happens?

     

    On the other hand, I noticed that no usb 3.0 are detected (picture attached), Any suggestions?

     

    Thank you.

     

    Kexts in other Catalina E6530.png

    USB detected.png

    Glitch start e6530.png

    config.plist.zip

  2. Hello everyone.

    I updated to catalina and I am trying to fix some video glitches when turning on and off my laptop (when turning it off issues are much more annoying).

    Optimus is on in bios and my bios version is A20. Attached are my config file and acpi folder. Latest lilu +whatevergreen+alc are in kext folder "Other" and in S/L/E

    Any ideas on how to fix it?

     

    Thank you.

     

    IMG_20191104_232302229.jpg

    config_ACPI.zip

  3. I am sorry, made a mistake somewhere. Kexttopatch are loading from clover correctly.  See attached

     

    1. Sleep: Followed instructions and now sleeps works fine. SOLVED (actually I had to apply patches mentioned on the next line )

    2. A minimal video glitch on boot. I had to apply rehab video patched to fix sleep completely and the low brightness issue on boot. 

     

    REMINING ISSUES

    1. USB 3.0 not working yet. Changed my DSDT file as suggested, installed FakePCIID + FakePCIID_XHCIMux kexts to system/library/extensions (just to make sure, I have them in clover/others too ). Kext wizard shows that they are not being loaded. USBinjectall is loaded though. See attached.

    2. SD card reader: applied patches to RP06 but it's not working. IOreg shows device on RP06. 

    Attached is my updated dsdt

     

    Thank you

    ioregSD.png

    kexttopatch.png

    DSDT.zip

  4. On 9/8/2018 at 3:52 AM, Hervé said:

    1) Sleep: did you disable hibernation as detailed in our FAQ section? Your DSDT is certainly suitably patched on the USB ports power management front.

     

    2) USB3: your DSDT contains the following (Apple-specific) code under the _INI method of scope _SB.PCI0:

    
                    If (_OSI ("Darwin"))
                    {
                        Store (0x2710, OSYS)
                    }

    Try and remove this and, instead, apply the following change to the Windows 2006-related code that you'll find a little further down the _INI method:

    
                    If (LOr (_OSI ("Darwin"), _OSI ("Windows 2006")))
                    {
                        Store (0x07D6, OSYS)
                    }

    This should activate your USB3.0 root. Then, all you'll need are Rehabman's FakePCIID + FakePCIID_XHCIMux kexts for USB2.0/USB3.0 multiplexing.

     

    Note that the renaming of EHCx device to EH0x for USB2.0 ports may not be required on the E6x30 family. I use no such renaming on my E6230 and all works well with MBP9,2 SMBIOS.

     

    3) SD card reader: your DSDT contains an incomplete (and cosmetic-only) patch for device RP06.PXSX. O2 SD card reader for the E6x30 laptops is covered in the dedicated R&D -> Hardware section. Patch your DSDT device accordingly.

     

    4) Graphics glitches: did you apply the final stage boot glitch patch ? In IOGraphicsFamily kext, binary replace 0100007522 by 010000EB22. You can apply this as an on-the-fly Clover patch.

    1. Sleep: Followed instructions and now sleeps works fine. SOLVED

    2. USB 3.0 not working yet. Changed my DSDT file as suggested, installed FakePCIID + FakePCIID_XHCIMux kexts to system/library/extensions (just to make sure, I have them in clover/others too ). Kext wizard shows that they are not being loaded. USBinjectall is loaded though. See attached.

    3. SD card reader: Work in progress...

    4. Graphics glitches: Patched as suggested but the glitches are still there. Something I noticed is that the clover boot log shows that only 2 kext to patch requested are being processed when there is a third one (intel glitches fix), see attached. 

     

    0:147  0:000  KextsToPatch: 2 requested

    0:147  0:000   - [00]: AppleAHCIPort (Fix IO Error ICH10) :: BinPatch :: data len: 20

    0:147  0:000   - [01]: com.apple.driver.usb.AppleUSBXHCI (USB 10.13.4+ by PMHeart) :: BinPatch :: data len: 10

    Any other suggestions? 

     

    Thank you

     

     

    add usb3.0 dsdt.png

    USB IORegistry.png

    Intel fix clover.png

  5. Hi everyone, I recently managed to install Mac OS 10.13.6 to my dell E6530 (dual gpu>Nvidia graphics nvs5200m + IntelHD4000), Dell Bios ver A20. After some customization I got almost everything working but there a few things that I would like to fix:

     

    1. Sleep issues: if I press the power button, the laptop goes to sleep but only for 2 seconds and then it's up again. If I close the lid, it does the same. I looked for the wake up reason in the log files and all show the same: LID0 EH02.

     

    2018-09-06 14:49:11.170999-0500  localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: LID0 EH02

    2018-09-06 14:57:59.577740-0500  localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: LID0 EH02

    2018-09-06 14:57:59.577742-0500  localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: LID0 EH02

     

    2. Usb 3.0 not injecting: My laptop has 2 2.0 USB ports and 2 3.0 ports. On system report/USB, I am able to see the 2.0 ports but there's no 3.0 ports on the list. I am using USBinjectall kexts + ACPI patches: change EHC1 to EH01, change EHC2 to EH02 + Kextstopatch: com.apple.driver.usb.AppleUSBXHCI 837D940F 0F839704 0000 837D940F 90909090 9090 , but I am not able to make the 3.0 ports available.

     

    3. Sd card reader: Is any way to make the O2 micro sd card reader work?

     

    4. Video glitch on boot (apple logos and a grey bar at the bottom of the screen): this is not affecting performance if the intel gpu, as far as I can tell, but it’s a little bit annoying.

     

    Jake Lo already explained me that it is not possible to make the HDMI video output work since in this laptop model the HDMI connector is hardware connected to the Nvidia GPU and since it is being disable via DSDT, it won't work.

     

    I hope somebody can help me.

     

    Thank you very much for your assistance.

    PD DSDT file attached

    DSDT.aml.zip

  6. 2 hours ago, Smart Tek Peru said:

    I went back to voodoo and sound is working as expected (internal, usb headphones, line out). Too bad that hdmi video output is not available in the dual GPU of E6530 (nvidia nvs5200m + intel HD4000). Hopefully, somebody can find a way at some point. Thank you for your help.

    Actually, I found that voodoohda had an issue with my internal mic. I followed Bronxteck's advice and cleared up unnecessary kexts and leave only vanillaHDA in S/L/E and place latest ALC+Lilu in efi/clover/kexts/other . After restarting, audio worked as expected and there was no issue with my internal mic.

    • Like 1
  7. 10 hours ago, Jake Lo said:

    @Smart Tek Peru

     

    That's incorrect. HDMI / DP are hardwired to the Nvidia graphics. Disabling via DSDT will prevent all external connection. Having patched AppleHDA has nothing to do with HDMI connection but perhaps HDMI Audio which is useless since HDMI is not going to work.

    If you want to use AppleHDA instead of VoodooHDA, you can use Lilu.kext + AppleALC.kext, but HDAPatcher should not be use together. Either or, not both.

     

    I went back to voodoo and sound is working as expected (internal, usb headphones, line out). Too bad that hdmi video output is not available in the dual GPU of E6530 (nvidia nvs5200m + intel HD4000). Hopefully, somebody can find a way at some point. Thank you for your help.

  8. Hi everyone, I read that using the hdmi video connection for the E6530 is possible (turning Nvidia off via DSDT) but the applehda audio kext must be used (not voodoo), is that correct? I am trying to activate the internal sound of my laptop using Applehda (patched via HDA patcher) + applealc + lilu + commander  but I can´t (usb headphones work ok). Thank you for your help (attached is my DSDT file)

    DSDTv2.zip

×
×
  • Create New...