shinyxxx

Hi, HelloBaker,

I have replaced the wifi card from 1820 to 1820A,

Please check the clover of mine.

Hope it will help you.

PS: I am waiting for the touchpad improvement.

 

The honor belongs to Mr Jake Lo!

CLOVER_7480_2019-05-28.7z

any progress on 3 fingers gesture?

On 3/20/2019 at 1:38 AM, Jake Lo said:

remove EmuVariableUefi-64.efi and APFS.efi from drivers64UEFI

will you please tell me how to update I2c driver to 2.1.5?

there is one unavailable USB port on the left.

Do you have any solution?

but why?

I think there must be something I missed

Dear Mr Jake Lo,

I did reinstall the system again, but this time I got some issues: system halt while booting or shutting down.

Will you help me?

debug_27216.zip

Yes! everything is good!

On 3/8/2019 at 5:38 AM, Jake Lo said:

Did you use Fn+F# to change or just F# to change, should be the latter.

As for HDMI, connect the monitor and then run the debug report

It is very good, the efi you give to me is perfect:

it support HDMI and type C

nothing to worry about, just touchpad need 3 and more fingers support.

today I tried bluetooth, but there is some issues like interruption,

It always connect then stop, then connect again, like that.

I will re-install the system again. and do what you said.

hope there is less issues.

 

------after re-installation, the system goes smoothly, but after installation of karabiner-element, keyboard light can't be changed.

here I share my clover folder(7480-6600u).

and the other issue is about HDMI.

can you share with me some method?

CLOVER 14.2 clean.zip

Thank you very much!

you help me a lot!

 

It still has the 5 language screen, but no other issues.

 

I have questions on: how to make the thunderbolt 3 and HDMI work?

and how to change the key about the backlight?

Now I can use F6 to reduce light, but I don't know how to turn up light. Also it needs to be F11 to turn down, and F12 to turn up, can you give me a solution?

the touchpad can work as a mouse, but not recognized as touchpad, I think.

battery status works well.

I will do the above, later reply.

7 hours ago, Jake Lo said:

Rebuild cache and reboot a couple of times before trackpad works. Trackpad preference won't work unless Battery Status is working...check that first.

Post debug file if you need further troubleshooting

 

Not sure what you're referring to in sign with 5 languages, post screenshot for better understanding.

above is the 5 language screen

and debug is sent.

debug file uploaded.

debug_18293.zip

On 3/3/2019 at 11:23 PM, Jake Lo said:

Can't expect stuff to work if you're using files for another model. 

Try this, replace contents into /EFI/Clover

7480_HD520.zip

I re-installed the Mac OS with your this EFI, and successfully run the system up.

cool!

but I get a sign as no trachpad.

and when start up I get a sign with 5 languages.

Could you tell me why?

with this EFI(changed from 7470), I can start mac (I just change back, and it is a good start).

with above only panic like the picture.

Can you tell what will cause this issue?

Or I just try re-install mojave 14.2?

CLOVER-7480.zip

you mean it needs a new installation?

cause I already installed the mojave, and start well with your 7470efi pack.

there is a reply with -v mode

Hi, friends,

I am starting my hackintosh now.

the attachment is dsdt and ssdt I got from clove F4,

Now I am using 7470EFI started my "Macbook air", but there are issues:

1, touchpad without 2 and more finger support,

2, light control is not work,

3, 1820A wifi is OK, but Bluetooth panic sometimes,

4, thunderbolt 3 and HDMI not work.

 

Please help me!

thank you!

 

detail info with my Dell 7480 with:

    Motherboard:

      CPU Type                                          DualCore Intel Core i7-6600U, 3400 MHz (34 x 100)

      Motherboard Name                                  Dell Latitude 7480

      Motherboard Chipset                               Intel Sunrise Point-LP, Intel Skylake-U

      System Memory                                     16265 MB  (DDR4 SDRAM)

      DIMM1: Micron 16ATF1G64HZ-2G1B1                   8 GB DDR4-2133 DDR4 SDRAM

      DIMM3: Micron 16ATF1G64HZ-2G1B1                   8 GB DDR4-2133 DDR4 SDRAM

      BIOS Type                                         AMI (10/01/2018)

 

    Display:

      Video Adapter                                     Intel(R) HD Graphics 520  (1 GB)

      Video Adapter                                     Intel(R) HD Graphics 520  (1 GB)

      Video Adapter                                     Intel(R) HD Graphics 520  (1 GB)

      3D Accelerator                                    Intel HD Graphics 520

      Monitor                                           BOEhydis NV14N47 (Dell 6HY1W)  [14" LCD]

 

    Multimedia:

      Audio Adapter                                     Intel Skylake HDMI @ Intel Sunrise Point-LP PCH - High Definition Audio Controller [C1]

      Audio Adapter                                     Realtek ALC256 @ Intel Sunrise Point-LP PCH - High Definition Audio Controller [C1]

 

    Storage:

      Disk Drive                                        SDXC Card  (119 GB)

      Disk Drive                                        SM951 NVMe SAMSUNG 512GB

    Input:

      Keyboard                                          HID Keyboard Device

      Keyboard                                          HID Keyboard Device

      Keyboard                                          HID Keyboard Device

      Keyboard                                          HID Keyboard Device

      Keyboard                                          HID Keyboard Device

      Keyboard                                          PS/2 keyboard

      Mouse                                             HID-compliant mouse

      Mouse                                             HID-compliant mouse

      Mouse                                             HID-compliant mouse

      Mouse                                             HID-compliant mouse

 

    Network:

      Network Adapter                                   Dell Wireless 1820A 802.11ac

 

 

 

 

 

origin.zip