-
Posts
11 -
Joined
-
Last visited
Content Type
Profiles
Articles, News and Tips
Forums
Posts posted by Aurola
-
-
I was cheering a bit to early ,
everything works fine except the HDMI audio, no output devices are given
it doesnt seem to work from the MSI GT730 or the Intel HD530, , can you guys help me one last time? (can pay in Belgian beers )
I am preferring to use the GT730 because graphics seems smoother to me
-
Thanks Jake Lo and Hervé,
it was still not working, tried now with Big Sur and everything 4K is supported
Many thanks again for the both of you
setup_var 0xAF 0x0
setup_var 0x350 0x4
were correct changes in BIOS
-
Appologies, did not know i could do it on the mac, i followed the guide in the FAQ "'Steps to change the DVMT value (Done on Windows or WinPE)"
thats why i presumed it had to be done in windows.
hereby is my efi part of the installation
I noted down all the correct bios settings and did returned to default bios settings.
Afterwards re-applied the correct ones but the USB gives me no boot anymore, i guess windows changed something while mounting it
-
Hi Hervé, i did check them,
setup_var 0xAF 0x0 For CFG lock and setup_var 0x350 0x4 for 128mb
I think the error is more in the usb that use to boot into my monterey ssd. I changed the config file with above
framebuffer-fbmem
framebuffer-stolenmem
but it is like the memory stick does not see a bootable drive afer editing in windows.
when i use an old clover usb it is recognized (but not bootable)
and i can ofcourse still boot of windows.
the monterey usb does not, can i repair it or something? I think i did everything correct but maybe the mistake was mounting it in windows.
-
Hi, i did all the steps below, with help from "Changing DVMT values in BIOS" @Jake Lo thanks for that
i unplugged the osx ssd for that and did a quick windows install on another ssd.
after that i changed:
setup_var 0xAF 0x0
setup_var 0x350 0x4
After the changes, disable the following in config file
framebuffer-fbmem
framebuffer-stolenmem
now i replugged the OSX ssd and the opencore usb, but i cannot seem to boot up anymore? no bootable device found?
did i miss something?
Kind regards
kristof
-
Ok thanks Jake Lo & Hervé
@Jake Lo do you mean you have to do this using the Intel HD Graphics 530.
kind regards
-
Hi I'm having a bit of a pickle,
I wanted to give my optiplex an upgrade to Monterey after buying a 4k screen and I had previously a perfect installation (even in 4k) with Catalina from JakeLo.
Now with opencore and Monterey I shows only 2K resolution even with SwitchResX. with Catalina I used an hdmi and have now switched over to a display port because I thought that was the solution. is there anyone that can give me a tip or tell me what I can do? With Catalina I used the gt730 from MSI and now with Monterey Intel HD Graphics 530.
do I need buy another graphics card or what can I do?
its so strange that it would worked with Catalina
my monitor is an Benq EW3280U
in attachment is my config file
Kind regads
-
Did you got this to work?
-
Hi Hervé
thanks for your swift response and help, i tried that without success, even more i also tried with another USB and bootpack on an optiplex 5060 and i get the same error.
Even with HFS+ (Journaled).
its strange
-
Hi All,
i am trying to install Catalina 15.14 on a 5570 and am successfull in reaching the installer window. i followed this guide from Jake Lo with latest clover and bootpack E7x70 because the specs are closest to the system i have.
I also did the step in disk utility Boot with the USB installer, start Disk Utility and initialize your SSD as an APFS drive, name it "Catalina". But when i want to start the installation and open the installer log i get the error "Unable to get FS for volume" in the beginning and it stops with
"disk is not convertible to APFS"
i tried with two different ssd's and even with ons M2 disk all with the same error, does someone have an idea?
regards
Latitude E5570: No HDMI output or wifi under Big Sur
in E5xxx
Posted
Hi i installed Big Sur on my E5570 and it looks and runs great
but two things are not working and that is HDMI Out and Wifi, i have no idea what i can change? can someone help on the right path?
Intel Core i5-6300U
Intel HD Graphics 520 1536Mb
Wireless-AC 8260
EFI.zip