Jump to content

Jief

Members
  • Content Count

    13
  • Joined

  • Last visited

Community Reputation

1 Neutral

About Jief

  • Rank
    Private First Class
  1. Yes, I did that. Each time checking that the patch was correctly injected with IORegistryExplorer. On some other post, the VGA port number is 9. I tried it too (with the 4 different options for VGA connector type). Would be great if someone knows how to get that VGA port number. I tried intel_reg under Linux (Internal LVDS+vga screen connected), as suggested in other forum. I got a big list, but where is that port number ? I attached the dump in case someone know how to read it. Thanks. dump-LVDS+VGA.txt
  2. Hi, I'm trying to enable VGA on a ThinkPad x220. The first post say to get your vga port number with Intel Registry dump (in Linux). I did that but there plenty of information and I can't see anything about vga port. Anyone knows how to get that port number ? Thanks. Jief
  3. Hi, I'm trying to change the pci id of my wifi card (AW-NB290) with DSDT patch. I have this Device (EXP2) { Name (_ADR, 0x001C0001) // _ADR: Address Name (RID, 0x00) OperationRegion (PECS, PCI_Config, 0x00, 0x0100) Field (PECS, DWordAcc, NoLock, Preserve) { Offset (0x62), PS, 1, PP, 1, Offset (0xDB), , 7, PMCE, 1, Offset (0xDF), , 7, PMCS, 1 } Name (LPRT, Package (0x04) { Package (0x04) { 0xFFFF, 0x00, \_SB.LNKB, 0x00 }, Package (0x04) { 0xFFFF, 0x01, \_SB.LNKC, 0x00 }, Package (0x04) { 0xFFFF, 0x02, \_SB.LNKD, 0x00 }, Package (0x04) { 0xFFFF, 0x03, \_SB.LNKA, 0x00 } }) Name (APRT, Package (0x04) { Package (0x04) { 0xFFFF, 0x00, 0x00, 0x11 }, Package (0x04) { 0xFFFF, 0x01, 0x00, 0x12 }, Package (0x04) { 0xFFFF, 0x02, 0x00, 0x13 }, Package (0x04) { 0xFFFF, 0x03, 0x00, 0x10 } }) Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table { If (\GPIC) { Return (APRT) } Else { Return (LPRT) } } } I don't understand : "Name (APRT, Package (0x04)". Where should I insert the Device(ARPT), like you show at the beginning of the wireless card inventory thread ? Thanks. Jief
  4. Thanks for taking the time to tell me ! Regards.
  5. Hi, I've fixed that wakeup bug (I think). I made a version 2.3.6. Only tested on a D630 and a Precison M4300. See https://github.com/jief666/BCM5722D/tree/GigaBug for sources and https://bitbucket.org/Jief666/bcm5722d/downloads for binary. I attached binary 64 bits. Cheers. BCM5722D-v2.3.6(Jief).kext.zip
  6. Jief

    D630 - El Capitan

    Hi all, long time no see, but still there. After a lot of digging, I think the problem is that OS X cannot detect a long press on the power button because of a hardware difference. That's maybe why Ctrl-Power still works. And that's consistent with Lion doing differently. Power button behaviour seems to have changed from Mavericks. I would have like to use ACPI-Debug on my real Mac to see what's happening in ACPI when you hold the power button (still less that 4/5 seconds because that is totally hardware). I don't know if I can patch DSDT and use Clover on real mac. Fn-Esc is mapped on sleep button (SBTN, renamed SLPB to match Apple). So also I think Fn-Esc is hardware and Dell dependent. I end up by swapping Power button and Sleep button in ACPI so when you short press the power button, the Mac goes to sleep. Exactly what I wanted. The only thing is you that lose the Ctrl-Power Button (you can still use Ctrl-Fn-Esc instead). Here is my DSDT (D630 nvidia). Cheers, Jief DSDT.aml.zip
  7. Hi, I've installed and updated Yosemite (10.10.5 (14F1605)) on my M4300. Worsk like a charm until I installed nvidia web driver. Now I have a panic in NVDAStartup. I tried nv_disable=1, nvda-drv=0, still got a panic. It looks like people usually got panic after NVDAStartup and can still boot with nv_disable=0, so I couldn't find much help. Anyone got an idea ? thanks, Jief
  8. Hi, I read a lot but it's not clear to me : is it possible to have 2 fingers scrolling with trackpad on D630 or M4300 (I have both) ? What work so far is hard press with one finger and then scroll. Thanks, jief
  9. Jief

    D630 - El Capitan

    Would you send me the DSDT for the nVidia model, so I can compare 3 ways ?
  10. You can display scrollbars in Preferences -> General -> Show scroll bars
  11. Jief

    D630 - El Capitan

    @Hervé : Ctrl + Power to show a dialog instead of going to sleep is normal behaviour for Os X on real macs. @djblastyfone : power dialog should not pop up when you press power button alone. Is that really what happens on you D630 intel ? BTW, you have installed X.9 on D630 + X3100 ? I read somewhere that there isn't graphic driver anymore. Am I wrong ? Send me your DSDT... jief
  12. Jief

    D630 - El Capitan

    Hi all, I managed to have a Dell D630 nvidia working perfectly so far (it's new, so maybe some surprises ahead...). The only small thing I would like to fix is the power button that doesn't put the computer to sleep. The button is seen by Os X ! if I press Ctrl + Power Button, the restart-sleep-shutdown-disalog appears. Here's my ACPI ? Device (PWRB) { Name (_HID, EisaId ("PNP0C0C")) Name (_PRW, Package (0x02) { 0x17, 0x04 }) Method (_PSW, 1, NotSerialized) { PSW (Arg0, One) } } I tried to change _HID to _CID as I found on forums, but when I do that, the button doesn't wake the computer anymore. Thanks, Jief
  13. Hi, Thanks for how to replace DummyUSBEHCIPCI.kext by USB_Injector.kext. I spent an hour trying to make DummyUSBEHCIPCI.kext work from EFI/CLOVER/kexts/10.11... Works also on D630. Thanks a million. Jief
×
×
  • Create New...