-
Announcements
-
April 2018: New Forum ! 04/06/18
We've migrated to an upgraded board and now have a new forum. We hope you'll like it. Whilst we took every step to ensure no loss of data and/or feature, we may have missed a few things and glitches may occur. Should you encounter a problem, please create a new thread in Feedback section of the forum, where we will endeavour to report on the follow-up until the issue is fixed. Thanks. OSXL Crew
-
Rampage Dev
-
Content count
22 -
Joined
-
Last visited
-
Days Won
2
About Rampage Dev
-
Rank
Crew
-
Sabertooth X79 with Intel E5-2697 v2 (ivy Bridge 12 core)
Rampage Dev replied to osxfr33k's topic in x79 DMG
VoodooTSCSync.kext is needed based on BIOS version. Does not harm to have it on said systems that this is not needed for. So for the ease of use for the end users we have it set that everyone simply installs this. The Asus Rampage Series boards for example do not need this kext and I believe yours does not either from my memory. As for ACPI Section in Clover. You are correct however on some Gigabyte boards we have found under some conditions failure to boot without these settings and furthermore on the Dual CPU systems (LGA 2011 based) will result in failure to boot as well. So we leave these settings as we have had since 10.8.x when we moved to Clover Boot Loader. In theory you can use are files from 10.6.7-current (which I have done with my AMD 6870). I have personally experienced no issues with performance but if you want to do some testing we can always branch the Clover Config files if needed. We just want to make it as simple as we can in regards to installation and post installation.- 1 reply
-
- 1
-
-
After reviewing there is no system specific edits needed so the generic one is fine. Enjoy!
-
From the IOREG no change...
-
Should be fine. We will be pushing this shortly and I can re upload the AMD version later but it will still work.
-
Here are two test files we our about to release on the DMG. Should address your issues with USB: https://dl.dropboxusercontent.com/u/88732606/Website/OSXL%20Files/Files.zip Please post a IOREG after testing.
-
Ok. I see what the issue is now. Can you do a Clover ACPI Dump and re upload your Clover EFI Folder. Thank you.
-
You may need to do the additional SSDT edit into our SSDT regarding Samsung NVMe SSD's. Are you aware what I am referring to as this is covered under RehabMan's documentation. Additionally I can get onboard audio working on that board. Email me a IOREG using files from the 1151 DMG and I will take a look.
-
Your running our old Clover Config list as well as the older SSDT. I would update these. Additionally you used the Clover Audio Patch which may be causing the USB patch not to work.
-
I am seeing several issues. Can you please send me your Clover EFI Folder for review. I want to verify that you have the latest Clover Config file and make sure nothing else is incorrect.
-
Can you post a IOREG with a device plugged into the USB ports in question. Ill see what I can do. Thank you.
-
x79 DMG: The following is an discussion regarding the x79 DMG found here on RampageDev. Please post any issues and or corrections that should be addressed below.
-
Dual CPU DMG: The following is an discussion regarding the 1151 DMG found here on RampageDev. Please post any issues and or corrections that should be addressed below.
-
1151 DMG: The following is an discussion regarding the 1151 DMG found here on RampageDev. Please post any issues and or corrections that should be addressed below.
-
Haswell DMG: The following is an discussion regarding the Haswell DMG found here on RampageDev. Please post any issues and or corrections that should be addressed below.
-
x99 DMG: The following is an discussion regarding the x99 DMG found here on RampageDev. Please post any issues and or corrections that should be addressed below.