Search the Community

My hardware: QIYIDA x79 LGA2011 v2.82 Xeon E5-2670 v2 Sapphire RX 580 Nitro+ 4gb Hi. I've already installed macOS Mojave 10.14.6 and tweaked the mac OS a bit. Now for me, a serious problem is turning off the computer. When I click on the apple in macOS and select "Turn Off" or "Restart", the monitor screen goes out, but the system unit continues to work (the power button is lit and the coolers are spinning). I waited for 10 minutes and nothing happens, I have to forcibly turn off the computer, and after booting into mac OS, a message appears that the computer was turned off incorrectly. I tried configuring both Openkore 0.64 and Clover 5128, but nothing helps. How do I fix the problem? Please help me. EFI_CLOVER.7z

Hello everyone. For reasons other than that, I had to reinstall mojave 10.14 on my latitude 7480. Most devices work, except the audio, I was checking and it must be from ACL256 ID> 21, that worked before reinstalling. I would like to know the steps to upgrade to Catalina or why not, to Big Sur, but I don't know how. Otherwise I stay with Mojave, hoping to have your help to activate the audio. I would like to know if I can update from olarila Catalina or big sur or should I do it from Apple? Where can I get the necessary and updated steps for my 7480? Thank you

Hi, so I've been using @Jake Lo opencore config for Mojave and I had no issues until when I tried to boot into recovery it stuck on the Apple logo and nothing else happened after then. I'm planning to replace clover with oc because I found everything much faster than using clover.

Hi Everyone, I finish to install Mojave 10.14.6 on my E5540 but something still don't work fine... I used boot pack E7440 by Jake-Lo and desktop arrived. Now don't work sleep (black screen and have to force shutdown from power button) Don't work 2 Usb on 4. Vga out don't work (maybe is impossible thing to fix but I would like to use it...) Advanced thanks to everyone can help me config.plist.zip ACPI.zip kexts.zip

Hello, below is detail hardware configure for my laptop 5491: Bios: 1.11.1 CPU: i5-8300H @2.3G Memory: 8GB DDR4 2666MHz Mainboard: DELL 0NFNN4 (CM246 Chipsets) SSD: TOSHIBA 256G NVMe (primary) HDD: SATA ST1000LM049 1T (second) Sound: Realtek ALC256 LAN: Intel I219LM7 Wireless/Bluetooth: Qualcomm QCA61X4A 802.11AC Wireless Adapter I had been completely install Mojave 10.14.6 on my laptop DELL 5491. Then I find out these problems: UHD Graphics 630 was only showed 7M Sound card (Realtek ALC256) cannot work, I try inject ID 5/11/13 /21/22/28/56 But it cannot still work Touchpad cannot work Qualcomm QCA61X4A 802.11ac Wireless card cannot work Please help me and give some suggestions to solve it. Attachment is my config.plist config.zip

I am interested in trying to hackintosh on my E7250 laptop, I tried downloading niresh catalina from the hackintosh zone and managed to enter the installation menu but when the installation process was stuck and then the PC restarted, I also tried downloading mojave from olarila and made a usb disk using balena but only 1 drive and it was unreadable. There was no visible clover folder & efi folder , I also tried the boot process and entered the clover menu but continued to restart when the mojave installation was entered.

I had to use windows for a while in my composing studio, but now I am moving over to Hackintosh (always been a Mac user). My problem is that I have two internal 800 gig SSD disks full of sample banks that I use in my projects. They are NTFS formatted. Can I use those in Mojave (system disk will of course be Mac formatted)? Will I have less speed or any other limitations if I keep them as they are? A lot of work if I have to reformat. I then have to back everything to an external disk, reformat and then move everything back

Hi, I've tried every available platform-id, edid patching, etc. The only platform-id I'm able to get into the OS with is 0x12345678, the correct one for this setup seems to be 0x01660004, but I can't get past the apple logo. Other issues are, touchpad only works with click and no gestures, batterylife says 0%. Would deeply appreciate some help with this.

Hello, I have been struggling in trying to boot USB Installer. I have Dell Vostro 3446 with: BIOS Version is A15 Intel dual-core i3-4005U [email protected] 8GB RAM You can check my hardware specifications here: https://www.dell.com/support/home/in/en/inbsd1/product-support/servicetag/0-R1FvSkx3N0NROGErd1dVaGJtWEtldz090/overview I don't have access to a Mac, so I created a Mojave bootable USB from VMware installation(High Sierra) following your Clover guide. I couldn't download macOS from App Store for some reason (it was getting downloaded in 14-20 MBs) so I used "macOS Mojave Patcher" I used "E6440_HD4600_Only_Mojave" bootpack but were unable to boot. (when I disabled Nvidia card using clover options) verbose showed that it was stuck at kext stall[n] 240s I guess I need my DSDT files patched. I tried patching but unable to. Can anyone please help? Attaching my clover folder. Earlier, I tried installing High Sierra in the same manner and got stuck at same point. CLOVER.zip

I have prepared bootable USB for installing macOS Mojave. The process went without error, but while booting it, the laptop is stuck at "End Random Seed". Kindly guide me. I can't seem to find a proper solution

Hello everyone, I would like to know if it is possible to install Mojave 10.14.6 on my Dell Latitude E6420, if there is any tutorial, in fact I found a tutorial on youtube from "Nick Silverstein Channel", but my Hack does not work the image when will start the setup screen after installation, it goes into sleep mode and when I turn on the computer again it gives a video artifact, so I can only boot the system using the flag FAKEID = 0x12345678, but the system starts without any video acceleration when i click (on this mac) it recognizes the hd3000 but it appears with only 4mb of video .. Ps: My Dell is Latitude E6420 with i5 2520M + HD3000 + 1600x900 Resolution My Report Aida64 [REMOVED] Tnks Help!

Hello, I've installed successfully Mojave 10.14.6 on my 5580, but getting a few issues: 1. I have no sound. 2. When I plug my external 4K monitor, the PC reboot..... 3. No wifi ( I'm still waiting for my new card) Can you guy please help me fix them. PJ my debugFile & EFI. ( I boot from config_tst) Thanks a lot EFI.zip debug_9697.zip

Good day! I have Latitude 7490 with i5 8250U, 24GB RAM and dw1560 Wifi/BT module installed. I am trying to install Mojave to internal 256GB M.2 SSD as a single OS, following Hervé's guide using Clover_Pack_7490_#6.zip It finally installed ok, but touchpad doesn't work and it doesn't see wifi and bt. How can I check, what's going wrong?

I installed MacOS Mojave 10.14 on my laptop recently, everything works fine except for these things: closing and opening lid does nothing Bluetooth sometimes work sleep doesn't work, its either it wakes up or there is a black screen Fn keys need to be remapped static audio when i inject headphones Im new to the hackintosh stuff, Can anyone please help me fix it if its possible I have attached my EFI folder EFI.zip

Hello Hervé, Thanks to your guide for Dell E6230 Mojave - I was able to successfully install Mojave in a very straightforward manner. However, I've got 2 issues as listed below and hoping you could guide me in fixing it, please? 1) I'm just unable to get the stock Bluetooth working and there are no kext files for the same in your bootpack for Mojave. 2) Left USB i.e eSATA port is no longer detecting and devices connected to it. You've mentioned about an Hackintool in the description but again the boot pack doesn't have the USBports.kext? any help from you end would be appreciated. Thanks in advance

Hi @Jake Lo On reboot, the Bluetooth device needs to be removed and reconnected to get it to work again. Is there something that can be fixed here?

Hi! I followed the guide here to create boot usb with mojave install app https://osxlatitude.com/forums/topic/8506-dell-latitude-inspiron-precision-vostro-xps-clover-guide/?tab=comments#comment-87342 Everything just fine but the installer hangs out at boot time at a very early stage I have attached my laptop system specs got with CPU Z Any advise is really appreciated. Thanks a lot! CPU-Z-LAP-DELL.txt.zip CLOVER.zip

Hello I am in need of some assistance getting this card to work. I have followed the guide by Hervé and my laptop will not boot if i add the pci parameters in clover. I did manage to get the laptop to boot once with working wifi and everything except the trackpad (but that was due to a faulty config.plist) and i fixed the config plist file and now it will not boot with injected pci device again... I have attached my clover zip and have also attached a screenshot from ioregistry. Any advice or guidence is highley appreciated. the Card is verified to have a 14e4:43a3 (rev 08) Subsystem: 1028:0021 (CN-0VW3T3) CLOVER.zip

Hi All, I am new here and after struggling for over 16 hours, I finally managed to install MAC OS 10.14.6 on my Dell E5540. A big THANK You to all the members in the forum who helped me get this far. Bluetooth, WiFi, Sound, and Display working!! I am stuck with the last piece, my HDMI port is not working. Connecting HDMI cable makes the laptop display go black and my monitor doesn't detect any signal. From this point, there is no way to recover the display and I need to do a force reboot. I would like to use a monitor in my setup as the laptop display is not that great. Can someone please help me in layman terms? Sorry for my lack of knowledge on this matter. Appreciate help on this.

I want to install the macOS on XPS13 9360, but I can't enter the installation interface. Is it because my DSDT is wrong? Can someone help me? i5 8250U / NVMe 256G / 8G / DW1830 CLOVER.zip

Hi, Finally I finished the installation of 10.14.6 on my Dell E5440. Everything works just fine, but HDMI will not work. Every time I plug it in, it causes a grey screen on my laptop monitor. Also on boot up. I attached my EFI Folder, maybe someone can help me. I searched a bit and read something about Azul Framebuffer Kext. Thank you for helping. Greedings, Hugo EFI EFI.zip

The questions says it all. I have set up mojave 10.14.5 How I can enable brightness control via functions keys. Its irritating that you have to go to System Pref>Display every time to change it. Debug files are attached. debug_3170.zip

Hello, with the help of incredible team here at osxlatitude I am able to successfully perform the post installation sans Wifi and Bluetooth. Can anyone suggest a card for this laptop as according to Dell website it only supports two models both of them will be incompatible with mojave. Kindly point me to some good cards for this laptop that are under $40.

Hi Guys. I got hands on a Latitude E5540 and i want to run Mojave on it. Unfortunately i got a reboot after that line of "+"... So i guess this must be some error related to "Memory Fix" ... but none of the three drivers provided by Clover do work...:( With "OsxAptioFix3Drv" the system stucks at the "+" line, with the other two drivers the system is rebooting instantly. All BIOS settings are configured as always suggested in this forum. Trying to boot with only 1 of the 2 Memory bars also does not work/does not make any difference. I'm starting with plain Clover 2.5 rev5033 and a non customized "config.plist" (Clover in full automatic mode). I do use "VirtualSMC". Any clues? System information: Latitude E5540 BIOS Rev A23 1366x768 Display Resolution 8GB of SK Hynix DDR3L 12800S Memory (2x 4GB) Intel Core i5-4310U CPU Clover information: Kexts used: AppleALC.kext AppleBacklightFixup.kext FakePCIID_Broadcom_WiFi.kext Lilu.kext SMCBatteryManager.kext SMCLightSensor.kext SMCProcessor.kext SMCSuperIO.kext VirtualSMC.kext VoodooPS2ControllerR6.kext WhateverGreen.kext Drivers used: ApfsDriverLoader.efi AudioDxe.efi DataHubDxe.efi FSInject.efi OsxAptioFixDrv.efi PartitionDxe.efi VBoxHfs.efi VirtualSmc.efi All KEXTs and Drivers have the latest version.

Greetings. Installed 10.14 Mojave on E5420, but can't get audio to work. On High Sierra used AppleAlc + Lilu and everything was fine. Tried to change layout id, changed HDAS to HDEF in ACPI section. Still no luck. I'm not sure what my codec is (only "Intel High Def Audio under Windows description), but I think that it may be around: IDT 92HDxxx HD Audio; IDT 92HD93 HD Audio. Any solution?