emenems Posted February 2, 2015 Share Posted February 2, 2015 it's working but i have artifacts when using this kext. (ar3011) Link to comment Share on other sites More sharing options...
matpratik Posted February 5, 2015 Share Posted February 5, 2015 EMlyDinEsHGuys for me its not working i have tested so many things on my Combo Card My Post on BT Link to comment Share on other sites More sharing options...
EMlyDinEsH Posted February 5, 2015 Author Share Posted February 5, 2015 it's working but i have artifacts when using this kext. (ar3011) My kext don't create any artifacts other just updating the firmware on the bluetooth device which is needed for the device to work. What are your device ids of the Bluetooth? PM me for new version of BT kext to test and see. EMlyDinEsH Guys for me its not working i have tested so many things on my Combo Card My Post on BT What is your bluetooth device ids? Can you get me your ioreg file using IORegistryExplorer app v2.1 or lower so i can look into? Link to comment Share on other sites More sharing options...
EMlyDinEsH Posted February 5, 2015 Author Share Posted February 5, 2015 Omg... I just tried this kext, and this totally fucked up my bluetooth . It doesnt even work in Windows anymore ! I mis-read the whole topic and didnt know this actually uploaded a firmware INSIDE the bluetooth card. Now, what Am i supposed to do to make my card work again ?!!! I've got a asus 751 laptop and dont know exactly which card is inside ... broadcom , qualcomm or intel most probably. How did you load my kext? as it needs devices ids of the bluetooth in my kext to load. What are your device ids? Link to comment Share on other sites More sharing options...
matpratik Posted February 5, 2015 Share Posted February 5, 2015 My kext don't create any artifacts other just updating the firmware on the bluetooth device which is needed for the device to work. What are your device ids of the Bluetooth? PM me for new version of BT kext to test and see. What is your bluetooth device ids? Can you get me your ioreg file using IORegistryExplorer app v2.1 or lower so i can look into? Hey thanks for the Kext now its working without any issue and i have uploaded my boot log and IOREG for you You can see your PM Box Link to comment Share on other sites More sharing options...
jkl555 Posted February 5, 2015 Share Posted February 5, 2015 Hi. The problem I have is the kext works intermittently. I have an Asus Z97i-Plus motherboard which comes with the BCM94352HMB. The first few times the kext works and I can pair the BT with my Logistics mouse and a PS3 dual shock controller. Then comes a few times the system comes up and I can see the messages that the kext is uploading a firmware, etc, but no BT module is found strangely from the menu bar. I also run into the case the boot hangs at the BIOS. Finally I have to turn off the Bluetooth from the BIOS to get around the hang. I leave the bluetooth manager off in the BIOS and buy an Asus BT-400 USB module. Same problem (works sometimes and sometimes doesn't) but there is no hang at the BIOS anymore. Finally I figure out if un-plug the USB module and plug it back in right away, the BT then starts to work. Any clue what I did wrong ? I am using clover but I am not injecting the kext but simply install it in the S/L/E. Thanks. Link to comment Share on other sites More sharing options...
mitrovtsiy Posted February 10, 2015 Share Posted February 10, 2015 Hi. Dont work for my AR5B195 (A3011), vid-04CA, pid-3002. What i can to do with that? Link to comment Share on other sites More sharing options...
maleorderbride Posted February 16, 2015 Share Posted February 16, 2015 I see you mention there is support for the BCM20702A0 (0x180a) in the OP, but say it is in version 2.8 of this kext. Do you have a link to v 2.8? Thanks! Edit: 2.7 allows my BT to be seen, so perhaps that was just a typo in your OP? Thanks! Edit #2: Also, this is contributing to an AptioFix memmap issue on my Clover install: 1. Is it possible for me to pare the size of the BTFirmwareUploader down significantly by only including support for my particular chipset? 2. Should I just load the kext after startup? (it appears to work if I kextload it) Link to comment Share on other sites More sharing options...
aldo86 Posted February 17, 2015 Share Posted February 17, 2015 hi, I have problems with my Bluetooth adapter BCM4352HMB. I can not turn it in any way, I have a HP DV5-1110EL. Excuse my English. Thanks for all the help you can give me. Link to comment Share on other sites More sharing options...
EMlyDinEsH Posted February 18, 2015 Author Share Posted February 18, 2015 Hi. Dont work for my AR5B195 (A3011), vid-04CA, pid-3002. What i can to do with that? Try my new version v2.8 and get me your system log if you have issues. hi, I have problems with my Bluetooth adapter BCM4352HMB. I can not turn it in any way, I have a HP DV5-1110EL. Excuse my English. Thanks for all the help you can give me. What are your bluetooth device ids? How did you install my kext? Also send me your system log so i can check. Link to comment Share on other sites More sharing options...
Recommended Posts