Vanja1382643826 Posted August 21, 2012 Share Posted August 21, 2012 To make my hackintosh complete I need to enable my internal laptop display. Is there any way I can achieve that? I tried with forced edid, and display overrides with no results. Tried some AtiConfig configurations (Hoolock, Eulemur, Shrike...), too. The result was always the same: black screen or some kind of 'sleep mode'. OS: 10.8 x64 Laptop: Toshiba satellite L675-10v, 17.3" display. VGA: Ati Mobility Radeon HD5470, 512 MB, Cedar Pro. The card (AtiConfig=Shrike) is fully working (QE/CI enabled) on ext HDMI and VGA ports. Link to comment Share on other sites More sharing options...
Beta1382643440 Posted August 22, 2012 Share Posted August 22, 2012 Post your DSDT with IOreg (From IOreg App) and I will look into your issue. Link to comment Share on other sites More sharing options...
Vanja1382643826 Posted August 22, 2012 Author Share Posted August 22, 2012 ioreg -l The .txt file is in the attachment. Thanks. ioreg.txt Link to comment Share on other sites More sharing options...
Beta1382643440 Posted August 22, 2012 Share Posted August 22, 2012 Post your DSDT with IOreg (From IOreg App) For DSDT: http://rampagedev.wordpress.com/2012/06 ... -dsdt-3-2/ For IOreg: http://rampagedev.wordpress.com/2012/07 ... use-ioreg/ Link to comment Share on other sites More sharing options...
Vanja1382643826 Posted August 22, 2012 Author Share Posted August 22, 2012 The files are below.. Thanks dsdt.aml.txt dsdt.dsl.txt ioreg.zip Link to comment Share on other sites More sharing options...
Beta1382643440 Posted August 23, 2012 Share Posted August 23, 2012 There is no frame buffer loaded which could be the reason it is not working. I f you give me the proper frame buffer I can inject it into your DSDT. Basically the frame buffer gives OS X the card layout and the port that the Internal Display is using is not working.... Link to comment Share on other sites More sharing options...
Vanja1382643826 Posted August 23, 2012 Author Share Posted August 23, 2012 I'm using Shrike as a framebuffer for my HDMI and VGA output. For my internal display I tried a dozen of them in Chamaleon (atiConfig=framebuffer), none worked. The framebuffers I tried: Vervet, Douc, Langur, Uakari, Zonalis, Alouatta, Hoolock, Baboon, Eulemur, Galago, Colobus, Mangabey, Nomascus, Orangutan. It is supposed that Hoolock (default framebuffer) or Eulemur must work for the internal display, but I don't know how to make them operational. Link to comment Share on other sites More sharing options...
Beta1382643440 Posted August 23, 2012 Share Posted August 23, 2012 Here is the edited DSDT. I patched the following: Mac Device Names SBUS LPCB Injected GPU Ethernet Built In Fix FN-Keys Power Button Fix And other little patches dsdt.aml.zip Link to comment Share on other sites More sharing options...
Vanja1382643826 Posted August 24, 2012 Author Share Posted August 24, 2012 Thanks, but it doesn't work. The steps I took to implement this patch. 1. copied to /Extra folder as dsdt.aml, chown-ed to root:wheel and chmod-ed to 0644 permissions 2. removed GraphicsEnabler=Yes and AtiConfig=Shrike from org.chameleon.boot.plist 3. removed my smbios.plist 4. booted in verbose and -f to clear the kext cache The system passes the kext loads and than freezes at some memory errors (the cursors stops at half word) or I get some kernel panics...IOACPI, IOHID. Link to comment Share on other sites More sharing options...
Beta1382643440 Posted August 25, 2012 Share Posted August 25, 2012 Boot with: DSDT=No Note this is case sensitive Then remove the DSDT Link to comment Share on other sites More sharing options...
Recommended Posts