kintz_09 Posted March 11, 2016 Share Posted March 11, 2016 Hi, I'm looking to dual boot my Dell Precision M6700 with Windows 10 and any version of Mac OS 10.10 or higher. My goal is simply to run Sketch without purchasing another computer. I tried to install using a USB with MacPwn El Capitan (Found here: http://www.hackintosh.computer/?p=197) but it failed. I used verbose and safe mode but the computer restarts within the first 15 seconds or so. Here are my computer specs: Dell Mobile Precision M6700 BIOS: A12 Processor: Intel i7-3740QM CPU @ 2.70GHz (8 CPUs) Memory: 16384MB DDR3SSD: Samsung 840 EVO 250GB mSATA ATA (Mac OS)SSD: Samsung 850 EVO 1TB ATA Device (Windows OS) GPU: NVIDIA Quadro K4000M Bluetooth: Dell Wireless 380 Intel 82579LM Gigabit Network Connection Intel Centrino Ultimate-N 6300 AGN Let me know if I missed anything. Also, I guess I should note that I receive an 'Invalid Partition Table' error but it doesn't prevent the boot from starting. If anyone can offer help I would greatly appreciate it! Link to comment Share on other sites More sharing options...
Recommended Posts