Jump to content

[PCI Configuration Begin]...


carbon16

Recommended Posts

On my D630/nvidia, downloaded and installed 2.2 EDP on 10.7.2

 

Every few boots or so, I get stuck on [PCI Configuration Begin].

 

I've added npci=0x2000, 0x3000, etc

 

I have also tried both D630 Intel and Nvidia packs and I get the same problems.

 

Why do I keep getting stuck at [PCI CONFIGURATION BEGIN]???

 

Sometimes it doesn't show up for 3 boots or so, then it shows up 3 restarts in a row.

 

Thanks in advance!

Link to comment
Share on other sites

On my D630/nvidia, downloaded and installed 2.2 EDP on 10.7.2

 

Every few boots or so, I get stuck on [PCI Configuration Begin].

 

I've added npci=0x2000, 0x3000, etc

 

I have also tried both D630 Intel and Nvidia packs and I get the same problems.

 

Why do I keep getting stuck at [PCI CONFIGURATION BEGIN]???

 

Sometimes it doesn't show up for 3 boots or so, then it shows up 3 restarts in a row.

 

Thanks in advance!

To fix it you should use Kernel Flag npci=0×2000 or apply dsdt fix for Device (PCI0):

change line:

Name (_ADR, Zero)

with this:

Name (_UID, Zero)

Link to comment
Share on other sites

To fix it you should use Kernel Flag npci=0×2000 or apply dsdt fix for Device (PCI0):

change line:

Name (_ADR, Zero)

with this:

Name (_UID, Zero)

 

 

How do you apply dsdt fix for Device (PCI0). I have this same issue and it happens at random. About every 3 reboots I get stuck at [pci configuration begin]. I have set kernel flag to npci=0×2000.

 

I am doing alot of iphone development for college and need a stable machine, I keep getting "Couldnt register "com.yourcompany" with the bootstrap server" in xcode and the only way I have found to fix this bug is to reset the computer ( the guys at stack overflow said that was the only solution), it is extremely aggravating to get stuck. I wish I was rich I would just buy a damn mac.

 

Just got that stupid error in xcode again, about to reset, sure hope it doesnt hang!

Link to comment
Share on other sites

×
×
  • Create New...