kenjorai

Finally fixed my own problem after hours searching over the internet.

The thing is I have to use a patched IOBluetoothFamily version from 10.8.5

If anyone need the kext pls PM me your email address.

Hi,

I have 10.8.5 installed with everything working except this AR3011 Bluetooth. AR9285 wifi works greatly.

I have problem after installing this kext, the bluetooth seems to be detected (BT icon appeared in system preferences) but cannot find/pair any bluetooth devices - my iPhone/apple BT keyboard.

In the System Info, it shows 0x0000 in VID and PID, however the actual info should be VID 3315  PID 12293 (VID_0CF3 PID_3005), is this the cause?

Also, if I use the original IOBluetoothFamily.kext from 10.8.5, the bluetooth cannot be enabled so I replaced it with an old version from the previous OS: v4.0.7.

 

 Apple Bluetooth Software Version: 4.1.7f4 12974

  Hardware Settings:

  Address: 1C-65-9D-47-41-CB

  Manufacturer: Qualcomm Atheros

  Name: Zenbook

  Firmware Version: 5.39321 (5.39321)

  Bluetooth Power: On

  Discoverable: Off

  Connectable: No

  Remote wake: On

  Vendor ID: 0x0000

  Product ID: 0x0000

  HCI Version: 0x5

  HCI Revision: 0x9999

  LMP Version: 0x5

  LMP Subversion: 0x9999

  Device Type (Major): Computer

  Device Type (Complete): Mac Portable

  Composite Class Of Device: 0x38010C

  Device Class (Major): 0x01

  Device Class (Minor): 0x03

  Service Class: 0x1C0

Just successfully upgraded my inferior 1366x768 screen to the FHD one. 

Everything looks stunning afterwards.

Special thanks to this forum which helped me a lot.

The hackintosh is nearly perfect except for the SD card reader and hibernate (short time period sleep works)

Send me your System log file(from Utilities app) and IOregfile using IORegistryexplorer app  after installing the new version kexts so i can help you so why new version is not working for you.

Sorry, I don't know how to do that because by that time my keyboard and mouse will be dysfunctional.

the new version is so much better than old one which you are using. If you could provide the details i asked then i can solve  this.

 

PM me the details i asked before and i'll solve your problem with new version.

Thanks for your concern. I'd be really happy if the new kext could work on my ux32vd.

The output was:

Enhanced Apple PS2 Controller and keyboard v2.6 by EMlyDinEsH(OSLatitude) for Elan Touchpad © 2012-2013

I wish I could post a screenshot here but I couldn't find the button.

What atheros model did you buy? did you have any problems with the antenna connectors?

 

I bought this card: ar5b195 (ar9285). It's only about $10 on ebay.

Both wifi and bluetooth drivers can be easily found by google.

Be aware that the connectors on native card is a little smaller than the new card.

I just cut off the small connectors and attach(solder) the standard ones to the cable (you can also buy the standard sized antennas from ebay)

I know there are better solutions since in my way the reception is not as good as the original.

Maybe because I'm not a professional on soldering stuff.

Anyway, hope you can come up with an idea to succeed without any effort.

Copy those Elan lines from System log in Utilities app and send me. Are you sure you have Elan touchpad? if your touchpad is working with VooodooPS2xx then I doubt that you have Synaptics touchpad. 

now it successfully recognizes my keyboard and mouse when I use the v2.1.3 kexst and it's treating my trackpad as v4.

I guess something you added to the later version of the kexts has some conflicts with my model.

Anyway I will stick with the old version for a while! Great work EMlyDinEsH, hats off to you!

I have the same model as yours and I upgrade the memory to 10G as well. I have also replaced the wifi with a Atheros wifi/BT card.

I'm also struggling with the SSDT and PS2 inputs.

Any progress would be thrilled to know..

Hi EMlyDinEsH,

I installed the Mountain Lion 10.8.3 on my zenbook UX32VD with i5 CPU.

I copied your two kexts to the Extra folder and removed the old ApplePS2, voodoo kexts, but to no avail.

The keyboard and trackpad just do not work. However I can see a line of Elan's copyright output when I boot with -v option. 

I've tried the v2.6 and v2.7.5 both not working. Now once I roll back the kexts to voodoo, everything is fine.

I still prefer to use your kexts since obviously you provide more functionalities than anyone else does.

Could you please help me to fix it?

Thanks,

Kai

Hi EMlyDinEsH,

I installed the Mountain Lion 10.8.3 on my zenbook UX32VD with i5 CPU. 

I copied your two kexts to the Extra folder and removed the old ApplePS2, voodoo kexts, but to no avail.

The keyboard and trackpad just do not work. However I can see a line of Elan's copyright output when I boot with -v option. 

I've tried the v2.6 and v2.7.5 both not working. Now once I roll back the kexts to voodoo, everything is fine.

I still prefer to use your kexts since obviously you provide more functionalities than anyone else does.

Could you please help me to fix it?

Thanks,

Kai