polygaryd

Any update on this? I have a g75vw with the gtx660m and I am seeing people getting this card to work in 10.10 and 10.11 But I cannot seem to figure out how to make it work even with the new web drivers that are supposed to support it. I had a g75vw with the gtx670 and it worked awesome in 10.11 , I sold it for a good price and picked up this one that needed some parts. I can boot into 10.11 if i use nv_disable=1 (and removing nvda_drv=1 after installing web drivers) and nothing else works

sleep doesnt work also

the dsdt patches for the brightness function keys, wifi function key, and backlit function keys do no work. my keyboard backlight is on but cannot be controlled at all, there is no way (slider or function keys) to set screen brightness either. any help would be great. im on osx 10.11.3 now on my g75vw with gtx670m.

To get yosemite working on the g75vw you need all the kexts listed above for el capitan 10.11 and genericusbxhci.kext (yosemite version), and AHCIPortInjector.kext in the drivers64uefi folder you need FSInject.efi, hfsplus.efi, OSXAptioFixDrv-64.efi(not OSXAptioFix2Drv-64.efi), and OsxFatBinaryDrv-64.efi. the config.plist is the same as el captians. usb installer will boot with full 1080p and everything working besides the same things that I listed above that dont work in el capitan yet.

to fix your time in windows if you dual boot https://osxlatitude.com/index.php?/topic/2085-fix-incorrect-clock-settings-in-windows-when-dual-booting-with-os-x-or-linux/

In the graphics section there is a section for hex code called edid and then inject edid check box under it instead of intel, ati, or nvidia. That didnt work for me though in clover booting yosemite or el capitan. I am using clover version 3292 (3280 also worked fine) and clover configurator version 4.22.5. I used a clover guide to get 10.11 on the flash drive make 2 partitions, make disk gpt, make one partition fat32 and the other osx journeled run the long termial command, wait till its done, install clover with only OsxAptioFix2Drv-64, then afterward delete vbox64.efi from drivers64uefi and copy hfsplus.efi into the same folder so now it should only have fsinject.efi, hfsplus.efi, osxaptiofixdrv-64.efi and osxfatbinarydrv-64.efi in it. My 10.11 kexts folder contains fakesmc.kext, asusnbfnkeys.kext(function keys(screen brightness and keyboard backlight adjustment not working), AtherosL1cEthernet.kext(ethernet), Voodoohda 2.8.6(sound no hdmi sound and its kinda crappy but better than nothing), BrcmBluetoothInjector.kext(broadcom bluetooth), FakePCIID_BCM94352Z_as_BCM94360CS2.kext(my bcm94325hmb wifi a/b/g/n/ac dual band wifi half hieght combo card that i swapped out) and ApplePS2SmartTouchPad.kext(keyboard and trackpad) My clover config is as follows: -nothing checked or enabled aka toally blank acpi section, -boot only has dart=0 checked, -cpu section is blank, -devices has inject, add clock, and fixownership checked -disabled drivers is empty -gui has my custom settings for dual booting win10 and osx 10.11 on same drive (havent figured out how to change name in clover of the secondary ssd which has win 7 on it in uefi, i also couldnt get windows 7 mbr/legacy to boot from clover at all and ended up reinstalling win 7 in uefi just to use clover menu). -graphIcs has only inject nvidia checked -kernel and kext patches has apple rtc, asus aicpupm, and kernel pm checked with name=appleahciport, find=45787465726E616C, replace=496E7465726E616C, comment=External Icons Patch, and type/key=string -rt variables is blank(no where to put in the string for sip diasable so everytime you modify the config.plist via clover configurator you have to manually re-add it?) -smbios is set to macbookpro 10,1 macbook pro retina display -system parameters has inject system id checked and inject kexts=detect To disable sip completely for use of cdock, extrafinder etc. The code to add to the end (before the last <dict> but after the secnd to last <dict> of config.plist is <key>RtVariables</key> <dict> <key>CsrActiveConfig</key> <string>0x67</string> <key>BooterConfig</key> <string>0x28</string> </dict> To get your weather/stocks/etc back, if they have dissappeared the weather app is located in system/librabry/coreservices, just double click weather app and it should come back, there is some glitch when disabling sip that makes the notification center act weird and this gets it back ot normal, i havent had to do this after the one time to get it come back on. I have tuxera installed in osx to write to my ntfs partion and i have paragon hfs+ in windows to read and write to my os x partion. very handy!! With this setup i can boot even the 10.11 installer usb to full 1080p with accelaration, keyboard, trackpad, usb 3.0 (2-ports on right side only), function keys (minus screen brightness and backlit keyboard), sound, my bluetooth/wifi with 5gh band working, and ethernet working. There is a way to use the old disk utility from 10.10 on 10.11 which I and many others greatly favor over the 10.11 version which is not useable formany functions. http://www.insanelymac.com/forum/files/file/480-disk-utility-patched-v2/is the easiest way to do it. Hopefully this helps others with their g75vw with 670m graphics cards get to a pretty usable os x 10.11 I could still use some help to get the backlit keyboardkeys and screen brightness working, sleep, etc. i have tried using dsdt patches for those fixes but when i boot using dsdt i get a black screen when it reachs the point of loading the graphics card. dont know how to get around it yet. Any help with the setup needed to be able to use a dsdt and have it boot to desktop with full graphics would be appreciated. I have a working 10.10 install usb that boots to full 1080p and everything working also. The whole guide is different than this 10.11 guide and took me a week to get it working. I will post that shortly

thank you for the info but im using clover in uefi and would like to know where to put it in clover configurator, if you could help that would be great. im trying to get my dsdt patched for working backlit keyboard function buttons and screen backlight function buttons to work (all other function buttons work with kext), but when i use my stock or patched dsdt it doesnt load the gtx670m like it does when i dont use a dsdt and just inject nvidia as well as us an smbios of 10,1 mackbook pro retina display 2012 model. I get the black screen and looks like its going to keep loading. any help would be greatly appreciated.

what do you do with the 670m.hex file after you download it???