Aimable_fr

Hi Strange! Last week, I replaced my old 2007 iMac by this Optiplex, my screen is an Iiyama G2730, and when it connected at two screen: Iiyama in HDMI & Samsung smartTV in DP, only samsung is OK and Iiyama is going black. If I invert two ports, the issue is same: only one screen is displayed. And I lost sound in HDMI & DP. I didn't change anything in my config. Today, I boot normally and the setup is totally ok with Iiyama at DP and Samsung in HDMI (standby mode)! versions: Clover 4871 Mojave 10.14.3 Have you upgraded 10.14.3 or last Clover? Is it possible a clover upgrade affect your setup?

Update: I Rewrited my config.plist with @anatharias Config.plist and: The amount of memory is OK Two monitors are OK with ig-plateform-id 0x193B0005 (HDMI & DP, VGA not tested) The sounds trough HDMI is OK on both (one or the other) Sound is not ok on jack (too bad). I'll try to change that with Hackintool later Your suggestions helped me to familiarize myself with the various config. Thanx for your perseverance!

Yes I seen it, bit it's not working: the amount of VRAM is down to 4Mb

@anatharias I tried some config with ig-platform-id, 0x193B0005 crash at boot I use RehabMan-USBInjectAll-2018-1108 for USB, need to use another? Your plist not content informations about RAM in SMBIOS, on mine, clover refuse to boot (halted after ++++++ line) I moved all kexts in "/Library/Extensions/" @Jake Lo Your plist not content information in graphics: ig-platform-id. I'll try your modified config tomorrow. Thank you both

there config.plist.zip

Ok sorry, you find the attached file below You can see that the second display is not recognized Too, I increased RAM to 8GB (2x4GB Crucial) and updated the SMBIOS memory informations without success. Vide = Empty Now is 12.2.2019, 17:2:10 (GMT) 0:100 0:000 Starting Clover revision: 4701.RM-4963.24249(ca6cca7c.a0344119e7) on American Megatrends EFI 0:100 0:000 Build with: [Args: -mc --no-usb -D NO_GRUB_DRIVERS_EMBEDDED -t XCODE8 | -D DISABLE_USB_SUPPORT -D NO_GRUB_DRIVERS_EMBEDDED --conf=/Users/rehabman/Projects/clover.git/src/edk2/Conf -D USE_BIOS_BLOCKIO -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE8 -n 9 | OS: 10.14 | XCODE: 9.4.1] 0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,752884AB-C86F-4CC0-86FF-83810A27D459,0x28,0x64000) @CE916E98 0:100 0:000 SelfDirPath = EFI\boot 0:102 0:002 === [ Get Smbios ] ======================================== 0:102 0:000 Type 16 Index = 0 0:102 0:000 Total Memory Slots Count = 2 0:102 0:000 Type 17 Index = 0 0:102 0:000 SmbiosTable.Type17->Speed = 1867MHz 0:102 0:000 SmbiosTable.Type17->Size = 4096MB 0:102 0:000 SmbiosTable.Type17->Bank/Device = DIMM1 0:102 0:000 SmbiosTable.Type17->Vendor = Micron 0:102 0:000 SmbiosTable.Type17->SerialNumber = 1FA50C98 0:102 0:000 SmbiosTable.Type17->PartNumber = 8KTF51264HZ-1G9P1 0:102 0:000 Type 17 Index = 1 0:102 0:000 SmbiosTable.Type17->Speed = 1867MHz 0:102 0:000 SmbiosTable.Type17->Size = 4096MB 0:102 0:000 SmbiosTable.Type17->Bank/Device = DIMM2 0:102 0:000 SmbiosTable.Type17->Vendor = Micron 0:102 0:000 SmbiosTable.Type17->SerialNumber = 1FA50CC8 0:102 0:000 SmbiosTable.Type17->PartNumber = 8KTF51264HZ-1G9P1 0:102 0:000 Boot status=0 0:102 0:000 Running on: 'OptiPlex 3040' with board '0MGK50' Thanx optiplex3040_aimable18-02-12.ioreg

Hi All This is the IOReg dump with 2 displays connected: Philips TV (32HFL4007D) in Displayport and Samsung TV (28ed690) - I work in TV world and I have lot of smart tv - When I start the Dell w/ DisplayPort connected, this one is priority.

Hi All, I brought the dell to my Paris business office in remplacement to my old workstation. I'll check that as soon as possible this weekend. For sound, front line jack is OK with layout 18, no sound in headphone jack.

Hi all, I followed the firewolf's guide and I modified the DVMT setting 0x350 & 0x351 to 0x3. Now, VRAM is up to 1536MB After that, I Tried 0x193B0005 but unfortunately, the VRAM dropped to 4MB. The good ig-platform-id for me is 0x19120000. Only one port port is functional either HDMI either DP, not both. Tested with a HD monitor, Samsung smartTV (very low res - beurk) and Panasonic Viera smartTV full HD OK, but, no sound in HDMI. Sound is OK with my old Griffin iMic usb dongle, natively recognized. I'll test hackintools differents layout if it improves. So, it's not important now, I had fun to install Mojave on this micro DELL. Next! Thanks for all for your help and hard experience !!!

Thanx Anatharias for your help. On my 3040, your ig-platform-id 0x193B0005 create a KernelPanic. The dell's Bios don't permit to modify the DVMT too, and the VRam seen with Windo$ is 192MB. I'll try to modify the DVMT setting with efi shell and come back The sound with front jack is too bad with a headphone. No audio provided on HDMI, idem with hackintool conf or fakepciid The BT is performed by a little dongle (Belkin F8T016: Bt2.1), at this time, my Magic Trackpad work perfectly. Hand off is not working (BT 2.1 not supported). And I'm not interested by VGA Port. But I found your hedgehog avatar on another site

I tried some configs and this is the result: Mojave is installed on this Dell 3040 microFF Corei3 latter Dell bios 1.9 It need to add RAM spec on SMBIOS (thanx to Jake) Intel HD530 (192MB VRAM) working with 7MB of VRAM, 1920x1080 on HDMI or (not and) display-port (VGA port is not tested); No Audio on HDMI, no sleep mode, probably no acceleration ig-platform-id is set to 19120006, 19120000 or other create a reboot. I Try to set VRAM to 192MB with no effect. In Devices, IntelGFX set to blank or fakeID (12345678) are same way idem with or not UseIntelHDMI checked. For Audio, I configured the AppleHDA ALC255, The sound is Ok on onboard speaker, however, on jack output, the sound is very bad. I'll check that on second time. Wired Network is OK with RTL8111, No Wifi card BT is OK with a Belkin Dongle: Plug and Play!!! my Magic Trackpad is working good in less ONE minute Here is my config.plist, if you have an idea for video card? Thnx config.plist.zip

Hi Thanx for your files, I check with my config and tell you if better

Thanx Jake for this trick, it's better. However, after monting the ram disks and displayed some error about /var or /private unable to open (I Think that since Sierra, these directory are not reachable), the SSD is mounted too, I have a KP when it try to load GPUdrivers intel like this: panic(cpu 2 caller 0xffffff7f825e5fbc): assertmsg@/Library/Caches/com.apple.xbs/Sources/GPUDriversIntel/GPUDriversIntel-10.22.29/Common/IONDRV/Intel/SKL/AppleIntelFramebuffer/AppleIntelController.cpp:25987 panic(cpu 2 caller 0xffffff7f825e5fbc): assertmsg@/Library/Caches/com.apple.xbs/Sources/GPUDriversIntel/GPUDriversIntel-10.22.29/Common/IONDRV/Intel/SKL/AppleIntelFramebuffer/AppleIntelController.cpp:25987 I tried to reboot with invalid ig-platform-id (0x12345678) and it boot now

Thanx Jake, I deleted the OsxAptioFixDrv-64.efi but I've the same issue: on 3040, the installer is stopped after the ++++++ line No Way, I Tried some config.plist. The processor on this 3040 is a Core i3 6100 3.2GHz. My SMBIOS config is iMac17,1 (Skylake) Is this CPU supported?

Thanx for you reply. The Clover drivers (drivers64UEFI) are: ApfsDriverLoader-64.efi AptioMemoryFix-64.efi AudioDxe-64.efi DataHubDxe-64.efi FSInject-64.efi HFSPlus.efi NvmExpressDxe-64.efi OsxAptioFixDrv-64.efi SMCHelper-64.efi And in drivers64: ApfsDriverLoader-64.efi AptioMemoryFix-64.efi DataHubDxe-64.efi HFSPlus.efi Is this setup good?