kyndder

hi again!

 

updated to 10.6.8

 

first got KP. Something about sleepenabeler. (first pic). booted with installer and with the terminal moved the sleepenabeler kext to desktop.

 

Now it does not KP but it also does not boot. Freezes like shown on the second pic.

 

Some ideas?

 

Thank You Very Much!

Sorry for ask, but... Did you repaired permissions and booted Ignoring Caches ( -f ) or in Safe Mode ( -x )???

(dude you are super genius)

This is not truth...

2433 error parse error, expecting "," or "}"

}) i assume just need to delete the ")"

3431 error parse error

If (LNotEqual (TBAB, Zero))

3472 error parse error

If (LNotEqual (TBAB, Zero))

3572 error parse error, expecting "$"

Device (USB1)

To have a "Patched" DSDT, we must have a really BIG knowledment on the ACPI table...

I know only the basics to made simple patches...

For the first error, you must check if is a "Method" end or a "Device" end, maybe you need to add a } or remove...

The others, is hard to know, but maybe you "Comment" something wrong...

Try using EvO DSDT-Fixer... Maybe could be a better choice...

And remember, this is just a test, there's no warranty that will work...

it's a clean dsdt, it extracted by the dsdt editor.

the errors are mostly:"object does not exist". when i click fix error, nothing. you can see the program run, but it doesnt seem able to fix any of the errors.

Try commenting the "Invalid Object"...

Insert " /* " before and " */ " after the object (without quotes)....

Se the example below...

/*              \_SB.MEM._CRS._Y10._LEN, ISMS)
               \_SB.MEM._CRS._Y11._LEN, EXTM)
               \_SB.MEM._CRS._Y12._BAS, USMA)
               \_SB.MEM._CRS._Y12._LEN, USMS)     */

when i open the dsdt, it has 168 errors.

i can only apply ahci patch or everything else. once i apply the ahci patch, when apply other patches, it hangs. once i apply any patch, it hang when apply ahci patch.

any recommandation?

You are applying the patches on a clean DSDT right...

If you already use DSDT, remove it first and reboot or use the Windows or Linux version of the app to made your DSDT...

When you "Compile" and see the errors, what happens when you click on "Fix Errors"???

Try applying the patches in the same sequence that i told to you... Some patches needs the DTPG patch...

[EDIT]

If anything works, copy the errors output and place here...

thanks for the reply.

i cant seem patch echi ownship patch, everyother patchs are fine. any where should i place the aml file?

Put at root of myHack stick or inside of the Extra folder (if have)...

yes, i have window installed. will try that today.

i assume i need to do the AHCI Sata orange icon patch???

when i boot with -v i also notice the ECHI cant take ownship of the bios, something along that line, should i do the ECHI oweship patch??

LMK

thanks

You can apply the patches below...

DTGP

AHCI SATA orange icon

Alias

EHCI ownership

EHCI sleep

IRQs

LPC

New HPET

RTC

Possible operator timeout is ignored

SBUS

Intel®5 series 4 port SATA AHCI Controller

You should not have problems with this chipset to install...

You have windows installed???

If yes, try running this app on windows and made a patched DSDT for you > http://www.insanelymac.com/forum/index. ... pic=223205

i cant. stupid sony bios doesnt have that option available. but everywhere i read it suppose AHCI by default.

You know what`s your controller??

ok,replace AppleACPIPlatform.kext and IOPCIFamily.kext with 10.6.8's kexts and boot with npci=0x2000 -v, now i got stuck at still waitting for root device.

You already set (if you have) SATA Mode to AHCI on your BIOS????

i would love to try that, but i cant get pass PCI configuration begin to install lion.

Use your myHack Stick and the Terminal.app from the installer to replace the kexts...

Or, if you have windows on the same machine, try MacDrive or Transmac...

I tried to resolve it by typing ncpi=0x2000 and running it in verbose mode but then I got to another strange screen with a strange white bar on the top of the screen

You can try replacing AppleACPIPlatform.kext and IOPCIFamily.kext > http://www.kexts.com/downloads.php?do=file&id=1528

Or removing all AppleIntelHDGraphics kexts (made a backup first)...

thank for reply put i install all E/E to S/L/E use kext wizard and also kp the matter with dual boot of snow and lion

Take a picture of the kernel panic and place here...

I've had Leopard, Snow Leopard and Lion running at the same time (even on the same disk) and never had problems ...

You can also try a newer version of the chameleon ..

To use UseKernelCache option you need to have all needed next for your system (including FakeSMC and NullCPUPowerManagement) on your /System/Library/Extensions folder...

I think that`s the cause that you can only boot with the -f option, this option force the boot loader scan all your

extensions folders (/E/E and /S/L/E) instead of "kernelcache"

>I`m from São Paulo / Brazil...

>My first Hackintosh was using Kalyway 10.5.2 (about 4 years ago)...

>I already made a lot of Hackintosh`es...

>I did my first Hackintosh because i`m a OS`s enthusiast...

>My first computer course was in 1989, during this time, i install and use many OS 's

(DOS, NOVEL, OS9, Windows, OpenBSD, FreeBSD, QNX, Linux, BeOS, HaykuOS) and i do not like programming...

>And I offer my help with anything that I can help..