unwesen

So am I right in thinking that if I follow the d630 download and add the two Kexts mentioned below I should end up with OSx on my m1330?

When and where do I add the kexts?

John

 

You need:

/Extra/DSDT from D630 and SMBios MB 4.1

 

/S/L/E/ the 2 netkas kext (s.a.) and BCM5772D.kext (google)

 

Use KextWizard for the install.

 

Good luck

Thanks for that clarification Bronx.

 

Therefore would I be right in thinking that using the d630 method which is all on a USB pen would work, giving me a 32 bit osx?

How do I get a 64 bit osx machine?

 

John

 

Yes =X3100. No way with 64-bit.

 

 

My Dell 1330/X3100 run fine 32-bit 10.6.8, with the D630 DSDT, and the 2 Netkas forum kexts.

If I remember correctly you need the kext for eth: BCM5772D.Kext.

SMBIOS MB 4.1

 

Now I am running 10.7.1.

There is a long thread about this on insanelymac.

 

First: X3100 or NV8400 graphics??

 

For x3100 you need the DSDT from this forum for the Dell D630 and you will get

32-bit only.

 

For Nvidia you can take your own or one from the insanely thread.

Note shutdown/ reboot won't work with NVidia.

 

And for 10.6.8 you need to replace:

 

AppleACPIPPlatform.kext and

IOPCIFamily.kext

 

with the 2 found in the netkas blog.

 

 

Otherwise you will stuck at: [PCI Configuration begins...

2_files_kexts.zip

Sounds good.

Actually win7 x64 does NOT shutdown !

bluetooth LED and NUM Lock are still on after shutdown!

 

WIN 7 ULT no probs here.

 

* Not stable with 10.6.8 - would run fine with 10.6.7

 

Replace AppleACPIPlatform.kext and IOPCIFamily.kext

with the one from the netkas page. Exact place later.

 

* No Lan

* Wifi had to be replace

* Can reboot most of the times

* Unable to shut down correct

 

 

Yes, but lid sleep even deep sleep is working.

For shut down hold the power buttom for 10 sec.

 

* Mobile broadband did NOT work

 

Option 380 works fine.