adriandb

yeah i usually have to disable the bt then re enable it. you might be able to do it trough the wifi switch if your bios has the option. i have a usb dongle and i pull it out then reinsert it.

Thanks! While I can't disable it via the Bluetooth prefpane it did just randomly start working again. 

Sooooo now, out of the blue (literally working one min and not another) my Magic Trackpad is not fully working. Single, double and triple taping or dragging do nothing. Anyone seen this before?

Ok, try this one

Back to everything working correctly except the SD card reader. 

Have you tested it with a port replicator (dock) to see if the VGA or DVI ports off of the replicator work?

@adriandb, can you send me a raw DSDT for your system?

Boot with DSDT=0, then extract DSDT with MACIasl or ChameleonWizard.

Thanks again.

dsdt.zip

I took the plunge on Yosemite, and tried your DSDT and SDXC kexts to no avail.

 

Im going to start a Yosemite thread to keep these seperate, but wanted to let you know the Card Readers not working with what you provided.

Dave

Good to know you got Yosemite working on this machine. I may have to try that soon.

Try this dsdt.aml.zip

Thanks for taking the time to help with this. When I tried this dsdt my trackpad stopped working, the keyboard only partially worked and the SD card still didn't work. I may just have to live without the SD card, which is fine. Thanks again.

send me your DSDT. Must be missing something.

Thanks.

dsdt.aml.zip

Also, when I open up kext wizard and click on the "Loaded" section there's nothing related to SD at all. Not sure if it's actually loading. 

SLE or EE would both work. Check to see if it's disabled in the BIOS.

It works with VoodooSDHC.kext installed, but then the machine locks up if it sleeps. Frustrating, but I've lived without it for this long.

Here you go, same version for 10.9.4 and 10.9.5 is you plan to upgrade.

Ugh, still not working. I'm using kext wizard to put this back in SLE, is that correct or should I just be putting this in Extras?

What OS are you running, I'll send you my patch to test.

10.9.3. Thank you!

 

As a side note, has anyone upgraded to 10.10? If so, what method did you use and what issues were encountered?

Try this

perl -pi -e 's|pci14e4,16bc|pci1217,8221|g' /System/Library/Extensions/AppleSDXC.kext/Contents/MacOS/AppleSDXC

No love... The system profiler is still reporting that I don't have an SD card reader. I used to have Windows on this machine in a dual boot setup and the SD card reader worked fine there. Hmmmmm...

The VEN/DEV will not be the same. For my E6420/E6430/6430U, it's pci1217,8221

Mine is 1217 8221 as well, but I'm not having any luck. I'm just editing the plist of the kext directly in the /System/Library/Extensions/ directory. Am I doing anything wrong?

merci bien de votre assistance

The idea is not to patch the binary, but the Info.plist of the kext so that it matches the id of your own SD card reader.

https://osxlatitude.com/index.php?/topic/7346-applesdxc-sd-card-driver-on-e7440/

The instructions indicate that the OP patched his binary. Is this unnecessary?

 

The driver matches on IOName, which has a default value of pci14e4,16bc.

This needs to change. First I patched the binary driver AppleSDXC with

the following perl script.

 

perl -pi -e 's|pci14e4,16bc|pci1217,8520|g' AppleSDXC

 

Next you need to modify the following section of Info.plist from

Where should the AppleSDXC binary live? 

Folks, to get SD Card reader working without killing sleep, try this

Credit goes to joe82.

The VEN/DEV will not be the same. For my E6420/E6430/6430U, it's pci1217,8221

You could skip the DSDT edits, it'll work fine without it. Enjoy!

This is great news! Can't wait to try it.

Everything is okay but one function is not work. It is woke up from sleep, always black screen. 

I only ever saw this issue when I loaded the VoodooSDHC.kext. If you have that in your extras try removing and then running myFix again and rebooting. You'll lose the SD card reader, but you'll have the ability to sleep the system.

For what it's worth, my dvi works on my docking station. I only used the extras from pepto's guide.

 

Did you use herve's extras?

No mine is different. My processor isn't the same as his I don't think. Is it likely related to the .kexts or the DSDT?

What OS X are you using?  I am on 10.9.4

 

I'm running 10.9.3. So you suspect that 10.9.4 may have broken the camera?

Any fix or kext for the camera? Mine is reported as this in the system profile:

 

Laptop_Integrated_Webcam_HD:

 

Model ID: UVC Camera VendorID_3141 ProductID_25651

Unique ID: 0x1a1500000c456433

Also, my camera is reported as a different model.

 

Laptop_Integrated_Webcam_HD:

 

  Model ID: UVC Camera VendorID_7119 ProductID_10624

  Unique ID: 0x1a1500001bcf2980

So it would seem that no one has a working camera on the e6320?

Mine works in QuickTime, Skype, Photo Booth, etc.

 

That would be appreciated. For what it's worth, my dvi works on my docking station. I only used the extras from pepto's guide.

 

Did you use herve's extras?

I did this so long ago that I don't remember what I used. Much or all of what I tried is documented in this thread though. My Extra is attached.

 

The output of a lspci -nn Terminal command on adrianb's E6320 would be useful too, to compare hardware.

Last login: Tue Aug 5 11:47:20 on ttys001

E6320-Hackintosh:~ adrian$ lspci -nn

pcilib: 0000:00:02.0 64-bit device address ignored.

00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)

00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09)

00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)

00:16.3 Serial controller [0700]: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller [8086:1c3d] (rev 04)

00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)

00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04)

00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04)

00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4)

00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b4)

00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b4)

00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4)

00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b4)

00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04)

00:1f.0 ISA bridge [0601]: Intel Corporation QM67 Express Chipset Family LPC Controller [8086:1c4f] (rev 04)

00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04)

00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04)

02:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01)

0a:00.0 SD Host controller [0805]: O2 Micro, Inc. Unknown device [1217:8221] (rev 05)

E6320-Hackintosh:~ adrian$

 

Extra.zip

Does DVI out via a port replicator (dock) work on this machine following this install method?

AFAIK I didn't do anything special to get my webcam working, it just works. I'm happy to post my Extras folder that I'm using if you're interested.