beseda

You'll need to extract a raw DSDT from your system first.

Boot your system with DSDT=0 IntelCapriFB=9 -v -f

Remove the DSDT from /Extra, then launch MacIASL or Chameleon Wizard to extract it.

Done. Whats next?

Can someone create DSDT for me? I can attach IOREG file and donate...

Perhaps platform-id 9 works better for your system. Restore the original DSDT and the FB I patched for 10.9.5.

Then try booting with -f again, see if there's any difference.

No difference....

I seem to have the same issue with my system with nvidia/HD 4000. Booting with -f fixes it.

btw brightness and toucpad didn't work after your DSDT

I seem to have the same issue with my system with nvidia/HD 4000. Booting with -f fixes it.

I booted with -f and UseKernelCache=No flags. Still the same freezing message

What else keys do I need to use?

backup your dsdt and FB and try these. Repatched to platform-ID 4

Works like last DSDT. No result

USB will work with the patched DSDT. Right now, we're trying to figure out the correct value to get full QE/CI for your display. Then I could repatch your DSDT.

Have you try the different value? from 0 to 11

Looks like it works with values 4 and 9. Tried feom 0 to 11. Display from NVIDIA and Video is IntelHD4000

yes

ok, thanks!

USB ports are not working too

Could be a DSDT issue. Do you have same CPU as the OP?

Try same boot flags but with different FB value

 

DSDT=0 nv_disable=1 GraphicsEnabler=Yes IntelCapriFB=4 dart=0 -v -f

yes

ok, thanks!

I forgot to say that I have 1 SSD (Crucial_CT128MX100SSD1) and pulled off my Intel WIFI

Other hardware are the same as in the guide

Try this boot flag

DSDT=0 nv_disable=1 GraphicsEnabler=Yes IntelCapriFB=9 dart=0 -v -f

Thanks, works but my IntelHD 4000 didn't load correctly (5 mb) and still got sleep delays

 

DSDT problems?

try booting with npci=0x2000 or npci=0x3000

didn't work

 

And GraphicsEnabler=No aslo didn't work

Here. Tuned to MacAir 5.2

Thanks a lot!

It's working on 10.9.5 now

 

But sleep, wake and sys start are very slow. Even after cache repair. When system starts in -v mode I see message:

 ioapic version 0x20 vectors 64 87

 

And it freezes start on 35 - 40 sec. What do you think is there a solution?

you can easily google it, but here is one source.

OK, but how can i get FakeSMC from its pkg?

You probably could update FakeSMC and GenericUSBXHCI if USB 3.0 port is not working, other than that, it looks fine. 

THanks for answaring!

Last question:

   Where can I gen new FakeSMC kext?

Try this 

THanks a lot!

Are the other kexts will be OK with 10.9.5 by this guide?

Sorry if this response is a little late, but it might help others reading this.

 

The DSDT was already patched to disable the Nvidia and include the patch for HD 4000.

I just notice the bootpack from the guide is for 10.9 which include a patched FB.

If you're installing with 10.9.4 or 10.9.5, you'll lose QE/CI with the included FB patched for HDMI. You'll need a new patched FB.

I have the issue for my E6430 with HD 4000. Restore with the vanilla kext and you should have QE/CI again but without HDMI audio.

 

Let me know which version of Mavericks you're installing and I'll patch it for you.

 

Note: not sure why the author install kexts to S/L/E rather than in E/E since he's using myHack method but I can validate that you could install all the patched kext to E/E and run myHack/myFix (quick) without an issue.

Can u make patch for 10.9.5?

Thanks!

Try repairing permission and cache.

How to repair cache?

Add -gux_defer_usb2 boot.plist

Ok, I added it. The problem with sleep and USB solved. But OS start and sleep mode are slow....

Hi, I followed that guide too I have some problems:

1.When computer goes to sleep mode if there are any USB devices - he wakes up

2. System start > 1.5 min

3. Wake from sleep(without USB devices plugged in > 1min)

 

My Mavericks version is 10.9.2