e5450

Hello, yes, my E5450 has only USB3.0 ports. I inserted GenericUSBXHCI.kext to /EFI/Clover/Kexts/Other, but it is still the same Error. Now, i spent a lot of time in reading Hackintosh Basics an Tutorials. I have a mostly running Yosemite on my E5450. I hope you agree with this solution und you will help me to get the following devices work correct: USB3.0 (not working) HD4400 (1920x1080 is ok, but i can't move position of windows and at the boot process, there are some graphics errors - picures are in the appendix) I used the Yosemite HDD Installer to install Yosemite on my HDD. Then I installed Clover to get Yosemite starting. Here is the content of /EFI/ (I pressed F4 at Clover Screen )- http://www.markus-reisser.de/OSX/EFI.zip I copied the follwing kexts with KextWizzard to /S/L/E at Yosemite. DisableTurboBoostBattery.kext FakePCIID_HD4600_HD4400.kext FakePCIID.kext IOAHCISerialATAPI_Injector.kext When i use the patched DSDT.aml Yosemite will not start... Thanks a lot

I deleted the DSDT.aml from /EFI/Clover/ACPI/patched. I edited the config.plist with - inject Intel - ig-platform-id: "0x0a260006" - Fake-ID IntelGFX: "0x04128086" In the appendix, there is a zip file with the content of EFI folder. It is still the same error seen in the picture... I rebooted my Dell after this error. Should i wait a few minutes? At the end i can read the scratched words "still waiting for your device"... I have seen, that the cursor goes a line down after about 20 seconds... EFI_without_patchedDSDT.zip

I disabled Inject Intel in Clover Configurator, but it is still the same error

Hello, thanks for your reply. Please see the picture in the appendix. I tried to set in Clover Configurator the following settings: ig-platform-id: "0x0d220003" Fake-ID IntelGFX: "0x04128086" ig-platform-id: "0x0a260006" Fake-ID IntelGFX: "0x04128086" Still the same error What's about the FakePCIID_HD4600_HD4400.kext and FakePCIID.kext? I only have the following kexts in /EFI/Clover/kexts/Other/ ACPIBatteryManager.kext FakeSMC.kext IntelMausiEthernet.kext VoodooPS2Controller.kext Is it possible to inject the IDs in DSDT? Thanks a lot

Hello, there is no nvidia card too. There is only the Intel HD 4400 installed. I loaded deafult settings in BIOS and set SATA to AHCI. I added slide=0 and nv_disable=1 in Clover boot settings, but still the same error. I disabled Bluetooth in BIOS => still the same error. Is it possible to disable Bluetooth in Clover? I don't need Bluetooth on my hackintosh. Now, i bought a BroadCom BCM94322HM8L and will change my Intel7265AC to BroadCom BCM94322HM8L.

Hello, thanks for your bootpack In the appendix is a copy of the content in [uSB-Clover]/EFI/ I installed your kexts from Other/SLE/* with kextwizard to [uSB-MAC-Install]/System/L.../E... Now, there is an error with Bluetooth... Should i disable Bluetooth in BIOS? EFI-new.zip

Thanks for patching the DSDT.aml After booting from USB (with your patched DSDT.aml in /EFI/Clover/ACPI/Patched) - there ist the following error: with -v, there is the same error msg and no more informations.

Hello, thanks a lot. Point 1 to 5 => all fine I pressed F4 and used my MacBookPro 10.10.4 to instal MacIASL (Hackintosh Vietnam Tool 1.9.4 20150707). I set ACPI in MacIASL to 5.0 and opened the dsdt.aml from /EFI/Clover/ACPI/origin/. Please, see the Error.png in the appendix. What's wrong with my dsdt.aml? DSDT.aml.zip

Hello, did anyone successfully install OS X Yosemite on Dell Latitude E5450? Intel Core i5-4310U 14" 1920x1080 Intel HD 4400 500GB SATA HDD 8GB DDR3 Dualband Intel 7265 AC WLAN => replace with xyz I think, legacy boot is not possible - i have to use UEFI boot with Clover. Thanks a lot.