e5450

Hello,

yes, my E5450 has only USB3.0 ports. I inserted GenericUSBXHCI.kext to /EFI/Clover/Kexts/Other, but it is still the same Error.

Now, i spent a lot of time in reading Hackintosh Basics an Tutorials.

I have a mostly running Yosemite on my E5450. I hope you agree with this solution und you will help me to get the following devices work correct:

USB3.0 (not working)

HD4400 (1920x1080 is ok, but i can't move position of windows and at the boot process, there are some graphics errors - picures are in the appendix)

I used the Yosemite HDD Installer to install Yosemite on my HDD. Then I installed Clover to get Yosemite starting.

Here is the content of /EFI/ (I pressed F4 at Clover Screen )- http://www.markus-reisser.de/OSX/EFI.zip

I copied the follwing kexts with KextWizzard to /S/L/E at Yosemite.

DisableTurboBoostBattery.kext

FakePCIID_HD4600_HD4400.kext

FakePCIID.kext

IOAHCISerialATAPI_Injector.kext

When i use the patched DSDT.aml Yosemite will not start...

Thanks a lot

I deleted the DSDT.aml from /EFI/Clover/ACPI/patched.

I edited the config.plist with

- inject Intel

- ig-platform-id: "0x0a260006"

- Fake-ID IntelGFX: "0x04128086"

In the appendix, there is a zip file with the content of EFI folder.

It is still the same error seen in the picture...

I rebooted my Dell after this error. Should i wait a few minutes? At the end i can read the scratched words "still waiting for your device"... I have seen, that the cursor goes a line down after about 20 seconds...

EFI_without_patchedDSDT.zip

I disabled Inject Intel in Clover Configurator, but it is still the same error

Hello,

thanks for your reply.

Please see the picture in the appendix.

I tried to set in Clover Configurator the following settings:

ig-platform-id: "0x0d220003"
Fake-ID IntelGFX: "0x04128086"

ig-platform-id: "0x0a260006"
Fake-ID IntelGFX: "0x04128086"

Still the same error

What's about the FakePCIID_HD4600_HD4400.kext and FakePCIID.kext? I only have the following kexts in /EFI/Clover/kexts/Other/


ACPIBatteryManager.kext
FakeSMC.kext
IntelMausiEthernet.kext
VoodooPS2Controller.kext

Is it possible to inject the IDs in DSDT?

Thanks a lot

Hello,

there is no nvidia card too. There is only the Intel HD 4400 installed.

I loaded deafult settings in BIOS and set SATA to AHCI. I added slide=0 and nv_disable=1 in Clover boot settings, but still the same error.

I disabled Bluetooth in BIOS => still the same error.

Is it possible to disable Bluetooth in Clover? I don't need Bluetooth on my hackintosh.

Now, i bought a BroadCom BCM94322HM8L and will change my Intel7265AC to BroadCom BCM94322HM8L.

Hello,

thanks for your bootpack

In the appendix is a copy of the content in [uSB-Clover]/EFI/

I installed your kexts from Other/SLE/* with kextwizard to [uSB-MAC-Install]/System/L.../E...

Now, there is an error with Bluetooth... Should i disable Bluetooth in BIOS?

EFI-new.zip

Hello,

thanks a lot.

 

5. Clover bootloader screen shows up, press F4 (this will dump your dsdt, ssdt), and shutdown.
 
6. Use another Mac, download HVT here, run the tool and install Tools > MacIASL, run MacIASL, go to Preferences and set to ACPI 5.0, then open /EFI/Clover/ACPI/origin/dsdt.aml in CLOVER USB drive. Click Compile, you will see 2 errors. Select the first error, you will see lots of Zero, delete them all. Click compile, you will see 1 error left.
Click Patch button, download the patch here and apply:
https://www.dropbox....x40 patches.txt
 
Click Compile to check for errors, if no error (ignore warnings), you can save the file with File Format: ACPI Machine Language Library, name DSDT.aml to /EFI/Clover/ACPI/patched/ (of CLOVER USB).

Point 1 to 5 => all fine

I pressed F4 and used my MacBookPro 10.10.4 to instal MacIASL (Hackintosh Vietnam Tool 1.9.4 20150707). I set ACPI in MacIASL to 5.0 and opened the dsdt.aml from /EFI/Clover/ACPI/origin/.

Please, see the Error.png in the appendix. What's wrong with my dsdt.aml?

DSDT.aml.zip

Hello,

did anyone successfully install OS X Yosemite on Dell Latitude E5450?

Intel Core i5-4310U
14" 1920x1080 Intel HD 4400

500GB SATA HDD
8GB DDR3
Dualband Intel 7265 AC WLAN => replace with xyz

I think, legacy boot is not possible - i have to use UEFI boot with Clover.

Thanks a lot.