gohmac

I have made an applescript to set finger z value to 20 at startup. At least no more "stuck" pointer till better solution is out. Open System Preferences>Users & Groups>Login Items>...click "+" key to add the script..voodoops2synapticpane.app.zip

Same issue here with E5430. 2 finger scroll works but trackpad prefpane settings would not save. 

Thank you for all the work in progress!

There is no "correct" platform-id that would work OOB for me and some other folks.  In theory 5430 that has BIOS hardcoded  64MB of stollen memory one must select from 2,3,8,9.  In practice id=4 worked for me but it has only one pipe and supposedly can only work for screen mirroring (no screen extention) so I have not pursued this path.  So my question remains what id have you used in dsdt or otherwise.

So far is not clear what connection strings are working for you and how (mirror, extended desktop)

My e5430 initially was using older BIOS version A07 and would only work with id platform 4 with no HDMI or VGA support but full QE/CI with 1600X900. Using the edited AppleIntelFramebufferCapri kext, I was able to have VGA and HDMI output with id 4 with mirror mode in single screen only. After upgraded the bios to A10, I was only able to boot to screen with id platform 8 with available graphics RAM of 384MB. With modified AppleIntelFramebufferCapri kext as outlined earlier in this post, I was able to use id platform 3 with reported available graphics RAM of 512MB. However, I still only have VGA and HDMI output in mirror mode which works with single screen at one time. I also need to change the resolution of the monitor to 1024X768 with SwitchResX otherwise the whole screen won't fit. Do you have any solution to have extended screen mode possible? 

What i meant was once you get your Intel HD4000 to work with the correct platform id, either with EFI injection or DSDT, the attached AppleIntelFramebufferCapri.kext that I've attached was hex-edited to enable VGA and HDMI output.

Strange that the 3 of us all seem to have different results as far as the graphics go. Platform Id 3 or 4 would not enable accelerated graphics with the stock capri kext from 10.8, 10.8.2, or 10.8.3. 

 

Nsemenov's capri.kext enables the HD4000 on 10.8 and 10.8.3 for me without a string, and just by using GraphicsEnabler=Yes. Internal display and HDMI both work with this config.

 

I have the i7 3520M processor, 1600x900 HD Plus Display, and 1 4GB stick of RAM. My system reports 384MB of video RAM. 

 

Malone, did your system ship with 16GB ram, or did you upgrade it? I would like to go to 16GB ram, but I've read conflicting reports that 16GB is only available through Dell Configuration Services?

Hi. I used platform id4, via dsdt, the only one that worked. Then edit AppleIntel FramebufferCapri.kext. Now I'm able to get both HDMI and VGA ouput working though still working on changing the proper resolution.

AppleIntelFramebufferCapri.kext.zip

I think i got the file from the dell vostro forum. My touchpad uses the Alps. Installed the file to S/L/E and need to delete the appleps2controller and appleacpips2nub.kext otherwise it won't work. 

VoodooPS2Controller.kext.zip

I have installed wireless card into empty wwan slot using previous hackintosh laptop and i have wifi after that. however sd card reader still doesn't work with voodoosdhc.kext. Would really like to get multigesture to work though. Any ideas? 

I used myhack with generic extra folder. Need to install voodoops2 kext to USB installation in order for trackpad to work. Post installation, I used multifail to install other kexts.

Need to install to S/L/E: voodoops2controller, b5722d(network), voodoobattery, voodoohda, aicpupowermanagement, applesmartbatterymanager, caldigitfastio, caldigitusbxhcl, sleepenabler kexts.

Need to delete from S/L/e: applehpet (for USB to work properly), appleps2controller, appleacpips2nub, nullcpupowermanagement kexts.

for intelhd4000 to work, need to use efi injection string ig-platform-id: 01660004 . Use chemeleon bootloader, chimera (chameleon, stolen and rebranded) caused kp.

For "still waiting for root device problem", use the fix for ioahcifamily.kext from vahan's blog.

Org.chameleon.boot: usekernelcache=no, graphicsenabler=no

Touchpad 2 finger scrolling does not work.

sleep works..i think.

Hi all. My first post here too.

My laptop is a dell latitude e5430 intel i5 with intel hd4000.

Installed ML 10.8.2 and dual boot windows 8.

It's working great except for bluetooth, sd card reader and wifi.

 

Goh.