mlacerda

Wifi is working. Now im trying to install video

I installed the Yosemite on my Acer laptop 1830T-6478 Now I'm having trouble installing the wifi and video drivers. My specs: Wifi Broadcom BCM43255 802.11 b/g/n Intel HD Graphics (Core I3 380UM) My touchpad mouse also not working ** Im using Clover bootloader Tks

I solved this problem. In BIOS I enabled "XD Bit" In Clover I enabled "Usb Ownership". I'm able to see the Yosemite installation screen .

I will try and report after.. Tks

This is my config.plist. I cant find RtVariables there. Should I add these parameters in " <key> Boot < / key >" ? config.plist.txt

fakeSMC is correct. The other configuration (CsrActiveConfig) i dont know. Where do I accomplish this configuration ?

Im using Clover. I think my setup is correct. AHCI is enable. XD CPU dont exist in my BIOS

Im trying to install Yosemite with clover im my laptop Acer 1830T-6478 My specs: Intel I3 380UM Arrandale Intel HD Graphics 3Gb The laptop restart after the message "Root Device UUID is XXXXXXXXX " and does not start the installation. I read the guide (http://www.insanelym...-graphics-qeci/) but there is no reference to the boot flags to be used for my case. Can someone help me? Tks

Unfortunately it did not work. I put the 3 files in the folder "EFI/CLOVER/APCI/patched" and I configured the DropOem flag to true. There was a black screen when loading the OSX. I made a video and captured the image ( frame by frame ) to view what occurred before the black screen. The screenshot is attached to this post. Tks

Sorry NewDSDTExtract.zip

Jake Lo.. Compilation of DSDT worked but I keep trying to operate the brightness however.. after activating the DropOem flag in Clover, OSX can not initialize. The message "still waiting for root device" appears and stops. The last thing that appears before stopping it "MT=>RTMPEnableRxTx ==> Line 10471" I have attached to this post the DSDT and screen shots of my problem. Tks DSDToday.zip

Unfortunately I am in Brazil and here is not very cheap I did the installation of EDUP but the connection drops all the time. The worst thing is that when disconnected , can not re-connect only after rebooting the machine . As soon as I turn on the machine, the connection is maintained for about 5 minutes .. and then falls. I researched a lot .. and found comments that could be due to the WPA or encryption, however, even with the open network connection remains. Funny thing is that on other networks I do not have this problem .. only wifi network in my house. I've tried all formats and encryption nothing. On windows works perfectly this same card on the same network. Any suggestion?

Friends, I have a problem when trying to compile my DSDT . I'm trying to brightness adjustment work on my Dell Inspirion 5548 running El Capitan . I am following the guidelines of this link ( http://www.insanelymac.com/forum/topic/236835-updated-2012-genericbrightnesskext/?mode=threaded&pid=1583900 ) As I understand it , I have to add the line Name ( _HID , EisaId ( " LCD1234 " ) ) within the GFX0 but when I compile my DSDT by MacIasl 41 errors are shown Could someone help me with this? config.plist.zip DSDT.aml.zip

It worked Thank you so much!!! The challenge now is to operate the USB Wifi Ralink!! Tks again

I re sent the image. In fact it was small I tested now with the setting made ​​by you and recognized the intel 5500 but the image is shaking. I'm excited! Finally it seems that we are on track

In Windows I have the configuration shown in the attached image. I need to do any more configuration in the BIOS? How do I enable the FB patch? The flag "InjectIntel" is set to false because when this is true a reboot in system load occurs. Thanks for the answer

After many days of hard work , the video card on my laptop is still not working. My laptop is a Dell Inspirion 5548 My spec: Intel® Core™ i7-5500U Memory 16GB, Dual Channel, DDR3L, 1600 MHz (2x8GB) HDD 1TB, SSHD VGA AMD Radeon™ HD R7 M265 2GB Screen LED IPS FHD 15.6 (1920x1080) Touch Intel Wireless 7265 802.11ac + I'm using El Capitan in dualboot (Clover) with Windows 10 and In windows the video card is normally recognized. I know it's not possible to disable the onboard video card this processor then I think the best option would be to operate the Intel HD 5500 on OSX but this also is not working. When I set InjectionIntel=Yes on Clover the OSX does not boot. I have attached to this post some pictures with the problems im facing. Someone can give me some help? tks config.txt