Search the Community
Showing results for tags 'e470'.
Found 1 result
I have a Lenovo Thinkpad E470 and I need some help with post-install. Lenovo Thinkpad E470 Processor: Intel Core i5-7200U (Kaby Lake) Bios: R0DET99W (1.99 ) Memory: 12GB (4+8) Graphics: Intel(R) HD Graphics 620 Wifi: Qualcomm Atheros QCA9377 (interface NGFF M2) Ethernet: Realtek PCIe GBE Family Controller IDE Controller: Intel(R) 6th Gen Core Processor Family Platf I/O SATA AHCI Controller SD Card Reader: BayHubTech Integrated MMC/SD controller Motherboard chipset: Intel Sunrise Point-LP, Intel Kaby Lake-U HDD: WDC WD5000LPLX-08ZNTT0 (500 GB, 7200 RPM, SATA-III) Trackpad: Synaptics Pointing Device Keyboard: Japanese PS/2 Keyboard (106/109 teclas Ctrl + Eisuu) Áudio: Conexant CX20753/4 @ Intel Sunrise Point-LP PCH - High Definition Audio Controller [C1] (codec: 14F15111h / 17AA505Bh) Intel Kaby Lake HDMI @ Intel Sunrise Point-LP PCH - High Definition Audio Controller [C1] (codec: 8086280Bh / 17AA505Bh) I have followed initially the guide below (it helped me a lot). Thank you guys for this @Max.1974 @Jake Lo!!!! After a successful Catalina installation, I've used the CLOVER folder from the guide but it never boots up. So, I did a clean install and used a config.plist from RehabMan. So far, so good (er, more or less). During the boot I can see lots of ACPI errors. I'm writing this message from the Lenovo E470 itself I've buy a SSD and I'm just waiting for it. Meanwhile, I'm trying to make it (almost) perfect. What's working: network - only cabled (ethernet) keyboard - although it is a ABNT2, I'm using it as a US International trackpad - not as good as I need - sometimes the click is not working trackpoint - works but not the buttons video - activated and using an external monitor through HDMI screen brightness (with keyboard keys too) SD Card Reader However, some things are not working: sound - only through headphones - using layout 15 (have tried all possible layouts) battery - not showing status wifi - not using - maybe I buy some wireless card in the future (also have 2 different usb dongles to test) Here is my current CLOVER folder and also codec_dump I made using Linux. I want to make it fully functional and learn some new tricks during the journey. I also want to make a more detailed guide to help other people. Any help is welcome. codec_dump-0.txt.zip CLOVER.zip