Search the Community
Showing results for tags 'legacy'.
Introduction This tutorial is for installing Clover UEFI in Lenovo G480. 1 - To install the operating system in UEFI mode, your BIOS needs to have the UEFI Boot option and it needs to be activated. 2 - Note that UEFI/EFI when this option is active, appears before the name of the drive. Format a USB drive as FAT32 and install Clover in it. You need to have at least this in drivers / EFI/CLOVER/drivers64UEFI folder. After you have installed, create the EFI/BOOT folder on the flash drive and copy the file to EFI/CLOVER/CLOVERX64.efi EFI/BOOT/BOOTX64.efi Start the system by USB drive to test the UEFI boot. If everything went right, and with everything working, it's time to install the Clover EFI. For that EFI has to be formatted in FAT32. The "x" is the number of your EFI partition. To format the EFI partition as FAT32: diskutil list sudo newfs_msdos -v EFI -F 32 /dev/diskXs1 Now mount the EFI: mkdir /Volumes/EFI sudo mount_msdos /dev/diskXs1 /Volumes/EFI Create a folder EFI on the EFI partition. Copy the EFI/Clover pen drive to folder EFI partition. Reboot with the flash drive inserted. In Clover menu, go to Clover Boot Options and select Add as UEFI boot option. Now you will be able to boot Clover from EFI partition without the pen drive, in UEFI mode. [This option will only appear if the UEFI mode is activated] From now you can not start without the pen drive at Clover EFI partition in UEFI mode. An afterthought, when all set, delete the folders of other drivers drivers32UEFI, drivers32 and drivers64. What Works USB 3.0/2.0 HDMI video and audio. Ethernet What Doesn't Work VGA CardReader