Carl3 Posted September 6, 2012 Share Posted September 6, 2012 Working with OS X 10.8 on myHack 3.1.2. It seems my installation isn't getting very far at all. Right after the progress bas appears, the system displays an error log. I've attached it. A short summary of my system info includes: Intel Ivy-Bridge Core-i5 3750K Gigabyte GA-Z77X-UDH5 ATX LGA1155 Motherboard Two Corsair 120 GB SSD's (one for each OS, I'm trying Windows 7 Home 64-bit on the other side). Let me know if I can provide any more information. Thanks, Carl Installer Log 4-Sep-2012.txt Link to comment Share on other sites More sharing options...
Conti Posted September 7, 2012 Share Posted September 7, 2012 My gut instinct with this is that you may have a corrupt installation usb, or something else corrupting - does the 'report crash' section appear in the same place each time? Have you tested the hardware (check filesystems with disk utility, test memory with memtest86+, run a torture test with prime95/mprime to ensure the cpu is stable etc). If your system passes all of those tests I would test the USB, or even suspect the source data - did you get your copy of OS X legitimately from the app store? I'd likely attempt to recreate the USB, or try another one, or internal disk partition. If all that failed I would try various USB ports, if that failed, I would start to suspect the source data. I have the same motherboard as you and I had no such problem, though I did have a problem with a bad USB stick on my first attempt, the second USB stick worked flawlessly. Link to comment Share on other sites More sharing options...
Recommended Posts