Jump to content

DW1560 Bluetooth problem


yves31
 Share

Recommended Posts

Hi,

I used Jake's Guide to setup El Capitan on my Inspiron 5558 i5-4210U, HD4400, 1080p touch screen, dw1560 card. Everything works well except bluetooth. Bluetooth was enabled but failed find any device.

Clover boot well, sleep ok. I used FakePCIID to make wifi working. Tried either BrcmPatchRam2 or BTFirmwareUploader for bluetooth. Both drivers enabled DW1560. I can get bluetooth on but it cannot find any device (android phone, keyboard, mouse...). No device cannot find the laptop either. Below is Bluetooth information from System Report and please help. Thanks,

 

------------------------------------

  Apple Bluetooth Software Version: 4.4.4f4 17685

  Hardware, Features, and Settings:

  Name: My MacBook Pro

  Address: A6-3D-8C-F6-3A-8C

  Bluetooth Low Energy Supported: Yes

  Handoff Supported: No

  Instant Hot Spot Supported: No

  Manufacturer: Broadcom

  Transport: USB

  Chipset: 20702A3

  Firmware Version: v14 c5668

  Bluetooth Power: On

  Discoverable: On

  Connectable: Yes

  Auto Seek Pointing: Off

  Remote wake: On

  Vendor ID: 0x0A5C

  Product ID: 0x216F

  HCI Version: 4.0 (0x6)

  HCI Revision: 0x1624

  LMP Version: 4.0 (0x6)

  LMP Subversion: 0x220E

  Device Type (Major): Computer

  Device Type (Complete): Mac Portable

  Composite Class Of Device: 0x38010C

  Device Class (Major): 0x01

  Device Class (Minor): 0x03

  Service Class: 0x1C0

  Auto Seek Keyboard: Off

  Services:

  Bluetooth File Transfer:

  Folder other devices can browse: ~/Public

  When receiving items: Accept all without warning

  State: Disabled

  Bluetooth File Exchange:

  Folder for accepted items: ~/Downloads

  When other items are accepted: Save to location

  When receiving items: Accept all without warning

  State: Disabled

  Bluetooth Internet Sharing:

  State: Disabled

  Incoming Serial Ports:

  Bluetooth-Incoming-Port:

  RFCOMM Channel: 3

  Requires Authentication: No

 

------------------------------------ 

 

 

Link to comment
Share on other sites

More information from dmesg | grep luetoo:

BTFirmwareUploader :: Broadcom WiFi/BT combo Bluetooth controller found

**** [iOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xd800 ****

**** [broadcomBluetoothHostControllerUSBTransport][start] -- Completed (matched on Device) -- 0xd800 ****

[iOBluetoothFamily][staticBluetoothTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xd800 

[iOBluetoothHostController][start] -- completed

**** [iOBluetoothHostControllerUSBTransport][interruptReadHandler] -- Received kIOReturnAborted error - retrying: 1 -- 0xd800

**** [iOBluetoothHostControllerUSBTransport][interruptReadHandler] -- failed to post another Read on the interrupt pipe -- error (0xE00002D8 (kIOReturnNotReady)) queueing next read.

**** [iOBluetoothHostControllerUSBTransport][DoDeviceReset] -- Re-Enumeration is currently not permitted -- this = 0xd800 ****

Bluetooth: Adaptive Frequency Hopping is not supported.

[iOBluetoothHostController::setConfigState] calling registerService

**** [iOBluetoothFamily][ProcessBluetoothTransportShowsUpActionWL] -- calling IOBluetoothFamily's registerService() -- 0x8040 -- 0x4a00 -- 0xd800 ****

**** [iOBluetoothFamily][ProcessBluetoothTransportShowsUpActionWL] -- Connected to the transport successfully -- 0x8040 -- 0x4a00 -- 0xd800 ****

Bluetooth Firmware Uploader v3.1 Copyright © EMlyDinEsH <www.osxlatitude.com> 2012-2016.

BTFirmwareUploader :: Broadcom WiFi/BT combo Bluetooth controller found

**** [iOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xd800 ****

**** [broadcomBluetoothHostControllerUSBTransport][start] -- Completed (matched on Device) -- 0xd800 ****

[iOBluetoothFamily][staticBluetoothTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xd800 

**** [broadcomBluetoothHostController][setupController] -- disableHIDEmulation() failed -- result = 0xE00002BC (kIOReturnError) -- retry 0 time(s) -- 0x1200 ****

[iOBluetoothHostController::setConfigState] calling registerService

**** [iOBluetoothFamily][ProcessBluetoothTransportShowsUpActionWL] -- calling IOBluetoothFamily's registerService() -- 0x8040 -- 0x4a00 -- 0xd800 ****

**** [iOBluetoothFamily][ProcessBluetoothTransportShowsUpActionWL] -- Connected to the transport successfully -- 0x8040 -- 0x4a00 -- 0xd800 ****

 

dmesg | grep BT

Setting BTCoex Profile: band:8

Setting BTCoex Profile: band:2

Setting BTCoex Config: enable_2G:1, profile_2g:0, enable_5G:1, profile_5G:0

**** [iOBluetoothHostControllerUSBTransport][interruptReadHandler] -- Received kIOReturnAborted error - retrying: 1 -- 0xd800

**** [iOBluetoothHostControllerUSBTransport][interruptReadHandler] -- failed to post another Read on the interrupt pipe -- error (0xE00002D8 (kIOReturnNotReady)) queueing next read.

**** [iOBluetoothHostControllerUSBTransport][DoDeviceReset] -- Re-Enumeration is currently not permitted -- this = 0xd800 ****

BTFirmwareUploader :: ProductID 0x216f, VendorID 0xa5c

BTFirmwareUploader :: Broadcom WiFi/BT combo Bluetooth controller found

BTFirmwareUploader :: Firmware already updated, skipping.

**** [iOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xd800 ****

**** [broadcomBluetoothHostControllerUSBTransport][start] -- Completed (matched on Device) -- 0xd800 ****

Setting BTCoex Config: enable_2G:1, profile_2g:0, enable_5G:1, profile_5G:0

Setting BTCoex Config: enable_2G:1, profile_2g:0, enable_5G:1, profile_5G:0

Link to comment
Share on other sites

 Share

×
×
  • Create New...