Jump to content

leppy700m

Members
  • Posts

    25
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by leppy700m

  1. Herve, Yes, DSDT is there. How is CPU power management done in the pack you provided? It has no SSDT-PM and no call to in in config.plist Right now, I'd settle for the built-in display. My EFI is coming from Jake Lo's bootpack, like everything else except the SMBIOS config and SSDT-PM Big Sur would not install using anything less than MacBookPro11.2 RIght now I am more concerned about the laptop display shutting off after the apple logo is first displayed. My E6430 will not even begin to boot with the boot packs you provided. First hurdle - configured to use VAULT - security section in config.plist is incomplete. What version of OPENCORE are you using? Are you using it with the release version of macOS 11.1? My E6430 specs are as follows: i7-3740QM HD 4000 only 1440x900 16GB RAM Webcam No fingerprint sensor
  2. I got through the install resuming from sleep, but that's not working as I boot into MACOS. Generating a new ssdt-pm.aml using ssdtprgen.sh did not correct that issue.
  3. I can't access this link you have above. The change to MBP11,2 settings is working. -no_compat_check was not working. Attached is my EFI. The kext section of the hires zip above looks like it's for Clover.... EFI.zip
  4. I don't think the the install is checking the SMBIOS for blacklisting - there is no internet connection at that point. That said, -no_compat_check has been in there right along.
  5. Thanks! It's good to see you guys are still at it too! Latest issue: I get to the Big Sur installer (recovery boots) and select the disk and get this message: "Update cannot be installed on this computer". It's a freshly formatted GUID/MACOS partition I am trying to install on.
  6. I have BIOS version A24. Your EFI booted my NVIDIA model into the install screen for Catalina. I still need to create an install USB for Big Sur. The Big Sur version of createinstallmedia fails - it locks the USB when it's done and you have to force eject it after which it's not bootable. The Catalina version works fine. I have the 1600x900 displays on both machines. This is NOT working to boot Catalina install on the E6430 without NVIDIA. Correction: It DOES work on the non-nvidia model - it just goes to sleep right after graphics start I push the power button and it wakes up and resumes. Good to know about the screen resolutions. I noticed that Jake's EFI contains a DSDT.
  7. This Machine: E6430 HDA4000 i7-3740QM (CPU swap, no NVIDIA) 1440x900 16 MB RAM Webcam No fingerprint sensor Jake Lo's EFI below works for my nvidia machine, but no graphics on the one without. Both have the higher-res panel. What needs to change for 6430 without nvidia? I am guessing dsdt and framebuffer?
  8. I have an E6430 with used a DSDT that disabled NVIDIA and a AptioMemoryFix.efi and HD4000 graphics are working perfectly. I won't have use of the HDMI port, but I don't need it. I am running 10.13.2 with APFS, the security update and it's been solid otherwise. The laptop runs much cooler with NVIDIA disabled and on macOS, I don't notice a difference in performance - HD4000 is more than adequate for my needs. Thanks to Jake Lo and Bronxteck for their assistance. So no, I don't have NVIDIA working. But even when it was, I wasn't happy with the heat. I like this better. I've attached my EFI - that should get you up and running on High Sierra if you can access your EFI partition and replace the EFI folder. EFI.zip
  9. Tried this bootpack after a new install of 10.12.3 E6430, A18, Nvidia, 1600x900 display (not Samsung), 16GB ram, tried optimus both ways. I7-3720QM, Clover 4012 EDIT: Boot is resolved: frosty had optifix2 missing from his EFI drivers folder, once I added that, it booted. VoodoHDA package included in Frosty's zipfile added sound. As far as I can tell, everything is working as it should. I haven't tried docking.
  10. I didn't reinstall. I just went down to A03, then A07, then A12. Note: the artifacts were just as bad on A11 as they were on A13 after going from 13 to 11.
  11. I got artifacts on the boot screen, but once I logged in - none - on A07. The same boot screen issues were evident on A12, but the kext mentioned above applied to /s/l/e fixed it.
  12. Thanks, Bronxteck! Update: I am back up to Bios V12 - no artifacts. I added the IOGraphicsFamily.kext from Jake's guide and that took care of the boot screen glitching too. It's a HD4000 E6430 with a 2.7 i5 and a 1366x768 screen on BIOS A12 running 10.10.5, and it's as near perfect a hack as I've ever had. Artifacts were very bad before reverting the bios down to V3. Nice work, guys.
  13. I just picked up another E6430 and HD4000 with Bios v13. I used Jake Lo's guide and ended up with artifacts on BIOS v13 and then v11. I backed down to BIOS v3, then v7. With v7, I only get artifacts on the boot screen. When I am home again, I'll try v11 again, then v12 and report back. I suspect that once v13 is flashed, you need to drop down to a version that resets the bios completely to get rid of artifacts.
  14. I'll give this a try later on. Thanks again!
  15. No, i think the DSDT edit is a pretty good start, but it needs some fine tuning for reliable sleep. DIsplay sleep seems to work fine here, but not full sleep. RE monitors out from the docking station - that could be done in DSDT as well, or with some efi strings. I don't have the time for these things that I used to.
  16. I have ML on my 2600K desktop. It shows 1 CPU graph. It may be a ML thing? What versions are your others running?
  17. Actually, mine is a DW1504 half card. I posted my result in that thread along with the device ids. Edit: After more research, it seems Apple never supported this chipset. So the DW1504/BCM4313 is unsupported completely. I've ordered a different (supported) card from Ebay.
  18. My Dell Wireless 1505 is not working in OSX, and I am wondering what half card ones there are that also work well in Linux and Windows. I need to replace this one, evidently. Other than that, my E6430 is purring happily along. Actually, it's a 1504, not a 1505.
  19. I'm flattered. And it's nice to see that so much good work has already been done on my new E6430 and I don't have to reinvent the wheel! This really does make a nice hack - it flies! I am already looking at live HDTV with it with the OSX version of VLC and my HDHOMERUN Prime's DLNA stream. Awesome stuff! The content of this thread needs some consolidation and organization. Once done, it needs to be pinned.
  20. Yeah from insanely mac. I was hacking D series lattitudes back a few years ago. I just decided it's time to step up.
  21. Originally posted the wrong replaced kext. I corrected. AppleACPIPlatform was pulled from somewhere on Insanelymac I think, when I was trying to get this going from scratch. I started that before I found this thread. That kext was supposedly patched for 10.8.3, and it helped me with the myhack install with 10.8.3, and I figured I may as well use it with your stuff. Thanks for the rollback kexts. I'll be pleased to get USB 2.0 fully working. EDIT: Yep, those USB kexts worked like a charm. Thanks again. I'M DONE! Well, done once I install a compatible wifi card.
  22. Very nice, I was able to modify myhack install slightly to work making a 10.8.3 install disk, booting with -x -f I also used a newer AppleACPIPlatform.kext both in the myhack extensions dir and in your /extra/extensions. AppleACPIPlatform.kext.zip Then I was able to use your /extra setup and everything booted fine. I am curious about exactly what you did to "roll back" to USB 2.0? I am definitely experiencing the lockup you described when I connect my mouse. Otherwise - AWESOME JOB. Edited: originally indicated wrong kext replaced
  23. My config is: E6430 with nvidia 5200m/Intel HD 4000 A9 Bios 1600x900 (HD+) display i7 3720QM 500GB Samsung 840 SSD 16 GB RAM Bluetooth Fingerprint reader package DW1504 Wifi Optimus disabled HDD set to AHCI XD Support Enabled Your /Extra setup causes kernel panics on my machine using Chameleon. What am I missing? Edit: I was missing two things: I didn't RTFM RE: myhack installs. Once I diid those two things, the extra pack works nicely. I used 10.8.3 so I needed to update one kext (documented in a couple of posts below)
×
×
  • Create New...