wonder2

no need. neither USBInjectAll.kext

there is no need for this patch, 6430 has less that 15 USB ports per controller. This patch is potentially dangerous. All you need is to patch DSDT to solve usb sleep/wake up. In Clover set USB/Inject and USB/FixOwnership

check this out https://osxlatitude.com/index.php?/topic/9248-working-sleep-on-intel-hd-and-nvidia-nvs-on-dell-latitude-e6430-optimus-enabled-or-disabled I bought DW1510 for WiFi. Don't buy USB-dongle, they are very unstable on hackintosh

I just changed the code to If (PM6H) { CreateDWordField (BUF0, \_SB.PCI0._Y0C._LEN, ECLN) // _LEN: Length Store (Zero, ECLN) } If (LEqual (PM6H, One)) { CreateBitField (BUF0, \_SB.PCI0._Y0C._RW, ECRW) // _RW_: Read-Write Status Store (Zero, ECRW) If (PM0H) { CreateDWordField (BUF0, \_SB.PCI0._Y0D._LEN, F0LN) // _LEN: Length Store (Zero, F0LN) } } If (LEqual (PM0H, One)) { CreateBitField (BUF0, \_SB.PCI0._Y0D._RW, F0RW) // _RW_: Read-Write Status Store (Zero, F0RW) }

I understand that but at least I can install mac. With the other boot pack I got install stuck. Any idea what I can do next? Any help is really appreciated Thank you,

Hi again, I am able to install Sierra using the guide https://osxlatitude.com/index.php?/topic/8506-dell-latitude-inspiron-precision-clover-guide/&do=findComment&comment=54632 Dell Latitude/Inspiron/Precision - Clover Guide. I used bootpack for 6430u, so audio does not work, no sleep etc. So I tried https://osxlatitude.com/index.php?/topic/9248-working-sleep-on-intel-hd-and-nvidia-nvs-on-dell-latitude-e6430-optimus-enabled-or-disabled/Working sleep on E6430 for both graphics modes! (Optimus Enabled or Disabled). I took EFI attached and copied (not merged) everything to my boot stick. The installation halts after printing several +'s. Turned out that if I replace DSDT/SSDT, the install fails. I am kinda curious what should I do? Any help is really appreciated Thank you, PS I did adjust screen resolution setting to '1366x768' along with 'ig-platform-id' set to '0x01660003'

It is 6430, not 6430u. I checked the Latitude E6xxx section but was not able to find what bootpack should I use for low res (1366x768, NVidia) Thank you,

Dell confirmed that it was a technical failure on this 6430u so I am returning it. I got 6430 (1366x768, NVidia) instead. Can you help me with 1) is there a guide how to install Sierra on it? 2) in the guide by Jake Lo for El Capitan bootpack is for 1600x900 and above, is there a bootpack for 1366x768 ? Thank you,

In BIOS in the Video section Native Resolution I've seen 0 by 0 and 32 by 554 depending on the video driver installed. Panel Type is Unknown Type. Thank you,

If I remove CMOS battery, will it help? Any ideas? Thank you,

never heard about such thing and dont know what to do about it but here they are for lcd and ext monitor, just in case

Jake Lo, could you please let me know what is Native Resolution in your BIOS? I have seen different numbers there. And Panel Type. Thanks a mil,

This is what I get after Fn+F8 on LCD

Here

the laptop is refurbished, dell sells them with Win 7 so win 10 is not supported. Fn+F8 works for me , it switches from TV to LCD but the picture gets messed up on LCD and switching back does not help. Sierra just does not see any monitors but TV. windows turns on LCD itself while loading. if I understand correctly, mac tries LCD and falls back to external monitor The thing is that I did see DELL logo during boot when I just got the laptop. Most likely is that one of the updates wrote something into NVRAM and I am stuck with it now. DELL refuses to exchange the laptop so my only hope is that Win 7 drivers will revert the changes