unklbee

I've added SSDT-TPDX, then I've two devices TPD1 and TPDX. If I remove SSDT-TPDX, the touchpad still jump and cannot work properly.

This is normal?

Hello, I've to try to follow opencore guide to activate my touchpad with Interrupt GPIO mode but always no luck.

 

Can someone please help me out with this?
Here is my spec

 

Dell Latitude 5510

i7-10610U, 2x8GB DDR4, Touchpad with I2C TPD1, 128GB SSD NVMe for Ventura, BCM94360CS2 WiFi.

 

I've attached my config, ioreg and untouched DSDT. Thanks
 

Archive.zip

iOreg.ioreg

I've to disabled wake on USB.

If I Put SSDT-GPRW, then the machine can sleep and plug or unplug USB will not wake up the system.

But the only way to wake up is using power button.

 

Yes it's work. Thanks!
But, the device in PCI is not show. It's OK?

Hello,

 

This is normal on Macintosh if we plug or unplug USB device while in sleep then the machine is wake up? m using Ventura 13.4.1 and Opencore 0.9.3

 

ASRock Z370 Pro 4

i7-8700

AMD RX470 4GB

Hello, I've Ventura 13.2.1 (22D68) installed on my ASRock Z370 Pro4, i7-8700 with Opencore 0.8.9.

Sleep work when Im not adding the SSDT-SBUS-MCHC to my config.

I

Is SMBUS SSDT is very important or just a cosmetic?

Thanks!

 

Hello, I've installed ventura 13.0.1 on my machine Asrock Z370 Pro4.

If I sent a photos or file to my hack it's success, airplay or bluetooth is work.

but unable sent to my iPhone.

Here is my card .

Thanks!

Note:

Opencore 0.8.7

Update:

 

Now, I've successfully make it to reach the 12.3.1
just adding bootflag brcmfx-delay=27000

For temporary use. I just to reinstall to Monterey 12.0.1 with OC 0.7.9 from Jake Lo. Everything works perfectly. Thanks!

Hi Hervé! Yes, I have to try with NVRAM reset too, but still freeze

Hi Hervé! Yes, I have to try with NVRAM reset too, but still freeze

Hi Hervé, thanks for the reply.

I have to try to edit config.plist and chanfe the compatible and pci-aspm-default to DATA and still no luck.

Hi Hervé, thanks for the reply.

update successfully, but when I tries to enable it again, then it wont boot. Still freeze

Hi Jake, thanks for the EFI and your reply!

 

I have to try it but unfortunately it's same. Just Hang.

 

Thanks for the reply!

 

Sorry, I mean its hang.

here is my EFI with OC 0.7.8 Ver. by Jake Lo

EFI.zip

Hello, I need help to update Monterey to 12.3.1. I used OC from Jake Lo Thread on Version 0.7.8 OC but facing with this Hang. What should I do? Thanks!

 

My machine:

e7270 i5 6th gen, 2x8GB RAM and 256GB SSD

sometimes HDMI will appears in device output if I put to sleep in some time

my problem is weird... If I put the headphone before the laptop turn on, then pull out the jack when reach to the desktop, the output still on the headphone, not detect/switched to internal speaker

Yes, I have to perform to clean and reset NVRAM but still no luck.. please help me out

Hello, first thank you for Jake Lo for his EFI. 

this is my first posting in osxlatitude. I have Dell E7270 with Big Sur 11.5 and Opencore 0.7.1 installed but i faced a problem with my headphone jack, the audio output not automatic switched if I plugged in the headphone jack. 

Hasbi’s MacBook Pro.ioreg

try this 

layout 13 

AppleHDA-280.12-ALC270.zip

Oh my ghost, it's work perfectly.. Speaker Internal, Mic Internal and Headphone Worked like a charm.

Thank you so much sir  

Here is my Vanilla AppleHDA.kext 10.13

AppleHDA.kext.zip

High sierra 10.13 sir.
Thank you for your reply

for ALC270 appleALC has 3,4,27,28 

did you tried all layouts ?? 

Yes, I've to tried all layout, but still no headphone sound. not lucky

Hello, I used layout id 28. Please help me out

I have to tried with AppleALC.kext + lilu.kext audio work but mic and headhone doesn't work

Hello, I have to tried 3 times for this guide, but still no luck no sound, no mic, and no headphone.
someone can help me please? my High Sierra still silent, :'(

codec_dump.txt