WalterWolf

I did recently manage to build working EFI´s with Clover 5108 and Open Core N-D-K 0.5.8 Asus H110m-a-d3 i7 6700 Working: Ethernet, Hd530 iGPU, Sound Will create USB-Map this We. AsusH110id3 i76700 CL5108.zip AsusH110id3 i76700 OCNDK 058.zip

Ok, then I’ll clean out my memory off OC and Check what Maybe from there and remove it. I don’t wanna loose u

I used the via Asl Compiled dstdt which were provided for Opencore skylake. is that wrong ? im getting crazy now with swapping cpu 5x an hour. will wait for my 6400 to arrive will follow your orders and reply tomorrow night

How to post Logs? OC generates them and makes it easy shareable

This GT730 is Fermi, so nevermind. Looking for a rx560 to replace it, after project is running Which m2 wlan/Bt will be supported ? 21:07 attached Efi EFI.zip

Hey folks, im trying for weeks to setup the following System under Catalina: https://support.hp.com/de-de/document/c05521606 i7 6700 with HD530 HP Lubin h270 Board 16gb DDR4 Corsair Vengeance 3000mhz Sandisk Extreme Pro 500gb NVMe Couple of 1tb HDDs Realtek RTL8161 Intel 3168NGW WLAN/BT - Which one I should get instead? Tryed Clover, Open Core and even OC N-D-K Fork. Cant get past Kernel Panic whilst booting from external OS Stick via Bootloader(s) Followed Github Vanilla Guides for Coffelake/Skylake and Compiled DSDTs as advised. Which Loader would u recommend? I can upload my work so far, if u tell me which u recommend. Thanx in Advance

Works like a charm =) Thanx Hervé !!! But as quoted, with lid closed and external display the system freezes due to overheating. Rarely it happens while using build-in screen. Is there a way to manually adjust fan-control ? Waiting for ordered Wifi/BT-card.

I checked by myself SLE and EE again. Even finder didn't find anything

thx chef =) So why my frequenzies stay constantly ? do i have to edit config.plist further?

Did I do a mistake ? ssdt.aml.zip FakeSMC.kext.zip

What to do now to get speedstep to work ? Edited my FakeSMC but can´t spot the kexts in S/L/E to disable like NullCpu..

Believe it or not, i did, saved, removed kexts, rebuild cache, rebooted. After that it was missing. But thanks alot =) Added IORegfile Walters MacBook Air.zip

Thank you very much Hervé ! Couldn´t test your config till now, cause the machine is no more booting. After hitting "Boot macOS" the system restarts. Trying to figure out why

Damm - it froze again, but after 1,5h usage... Does the setup right now look well, or should I change anything important before searching for the freezing causes ? Thanx in advance, Walter

Hello again, I just followed your advice - no freezes anymore! Thank you very much!!! -Is there any Idea on how2 fix the boot artifacts ? -Card reader already worked, just tried it out. -To completely beeing able to read CPU temp I have to install FakeSMC, right ? -Onboard Bluetooth isn't even recognized in the list. Any idea for me ? Could you pls check my EFI again, it's attached ? Thanks in advance!! -Why Clover config always wants to convert SSDT from Cpu0lst to Cpu0cst ? Again, thanx alot !!! Greetings, Walter. EFI.zip

Thanks very much Hervé and Jake! I´ll follow up the advises carefully then report back

In Sierra, the AppleHDA binary patch for codec ALC292 consists of: replace 8419D411 by 9202EC10 (2 x instances) replace 8508EC10 by 00000000 (2 x instances) replace 8408EC10 by 00000000 (2 x instances) originally written by Hervé Okay, did that. May I have problems with the DSST causing the restarts ?

EFI.zipHere's the EFI folder. I installed VoodooSDHC.kext VoodooPS2Controller.kext IOBluetoothFamily.kext Not working right now: On-Board Bluetooth HDMI out (sound only) Trackpad Zoom (Scroll, 3 finger gestures work) Boot-Glitch Freezes sometimes

Thanx a lot chef =) Audio is working! Working on the rest. Will UL EFI soon

Finally it worked out. Did everything from scratch. Thank's to all of you <3 But sometimes the dell freezes. Only restart helps. I guess thermal issues, because after freeze hardwaretest implemented also freezes. Also Artifacts in the bootscreen, no matter which Bios rev. Audio not working

thanx bronx! but i (tried to) did the conversion as mentioned before and now i´m stuck booting. HDD-Swap shows no difference

Thanx, but why can´t I just install again from USB? Also the same problem there. I checked RAM, HDD, Bios + Win still works What shall I do now ?

HDD works fine. Any ideas ?

8. Repair permission and rebuild cache. Run command from terminal sudo chmod -Rf 755 /L*/E* sudo chown -Rf 0:0 /L*/E* sudo touch -f /L*/E* sudo chmod -Rf 755 /S*/L*/E* sudo chown -Rf 0:0 /S*/L*/E* sudo touch -f /S*/L*/E* sudo kextcache -Boot -U / 9. Go to System Preferences Enable Clicking for Trackpad Allow apps downloaded from: Anywhere for Security & Privacy Note: For Sierra, run this in terminal instead: sudo spctl --master-disable 10. Generate own SMBios and SSDT Launch /EFI/Clover/Config.plist with Clover Configurator (Included in Tools attached below) On the left, click on SMBIOS Click on the magic Wand on the right Select the model most suited for your system or use same model included in bootpack, generate a new serial Close Clover Config and save the file. Execute ssdtPRGen.sh from terminal (Included in Tools attached below) Place generated SSDT.aml in /EFI/Clover/ACPI/Patched 11. Make sure to disable hibernation as it's a prerequisite to get sleep & wake to work Ok on a Hackintosh: sudo pmset hibernatemode 0 sudo rm -f /var/vm/sleepimage sudo pmset hibernatefile /dev/null It seems now, the machine can´t read the hdd, loading starts, but nothing happens. Testing the hdd now

I finally completed following the guide, thanx for writing ! Worked fine since i fixed permissions, worked on config.pls and created own dsst-file. Now I can´t even boot or re-install. Any suggestions ?