lucky9

Hi! a little update, I copied the following under kextstopatch inside config.plist file and restarted.. The bluetooth showing up. But with a problem of not able to connect to devices any suggestions? And wifi is still not working.

Yes it has bluethooth, it worked earlier don't know how, when it worked I see Ethernet and bluetooth option on network. When I boot from the config-AR9565.Plist I see black screen.

Hi Hervé, thanks for the link. Hi Jake, sound problem got solved, I installed VoodooHDA 2.8.6 and it worked although I tried your solution couple of times but it didn't work (I restarted and build cache couple of times as you suggested.) After I fixed the sound, restarted to rebuild cache from terminal, and I end up getting these. rebuilding //System/Library/PrelinkedKernels/prelinkedkernel kext file:///System/Library/Extensions/DisableTurboBoostBattery.kext/ is in hash exception list, allowing to load kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext CodecCommander.kext kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext AppleBacklightInjector.kext kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ACPIBatteryManager.kext KernelCache ID: AEA4CA9297C7B54DBA295236FAC1DB35 symlink("/System/Library/PrelinkedKernels/prelinkedkernel", "/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache") failed 17 (File exists) <createPrelinkedKernel 2795> kextcache updated critical boot files, requesting launchd reboot Although, I rebooted and rerun those commands to rebuild the cache but it again ended up with the same result posted above. please find the screenshot of the USB section attached. Please also guide me how to work with AR9565 file. as its written there : " please don't use it with KextsToPatch because it might not work..." How, do I install these files? Should copy these to internal EFI partation kext folder and to system / Library/Extension folder and rebuild cache ? Edit: I left laptop for 15 min unattended and it went to I guess in sleep mode.. Had to shut down form the power button. . I see during boot, wake form Hibernation : no

1) Touch pad fixed. 2) Yes Sound is not working. 3) Bluetooth and Wifi not working too. Here are the results after running all the commands in terminal. MacBook-Air:~ A$ sudo chmod -Rf 755 /L*/E* Password: MacBook-Air:~ A$ sudo chown -Rf 0:0 /L*/E* MacBook-Air:~ A$ sudo touch -f /L*/E* MacBook-Air:~ A$ sudo chmod -Rf 755 /S*/L*/E* MacBook-Air:~ A$ sudo chown -Rf 0:0 /S*/L*/E* MacBook-Air:~ A$ sudo touch -f /S*/L*/E* MacBook-Air:~ A$ sudo kextcache -Boot -U / rebuilding //System/Library/PrelinkedKernels/prelinkedkernel kext file:///System/Library/Extensions/DisableTurboBoostBattery.kext/ is in hash exception list, allowing to load kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext CodecCommander.kext kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext AppleBacklightInjector.kext kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ACPIBatteryManager.kext KernelCache ID: 29B3F7FB406D52B5EE52420D605F41EC File at path '/System/Library/PrelinkedKernels/prelinkedkernel' changed, cannot be used Child process /usr/sbin/kextcache[635] exited with status 77. Error 107 rebuilding /System/Library/PrelinkedKernels/prelinkedkernel EDIT: I have noticed during boot a failing message which says : Litu @ failed to find /private/ver/db/dyld_shared_cache_x86_64h.map. screen shot is enclosed.

->

It has Synaptics Touchpad. I think there is issue with the keyboard driver too, I tried taking a snapshot with windows+Shift+3 the screen flashed but the screen shot was not saved. It was previously working though. One thing more noticed that screen flashes on pressing any key. after Windows+Shift

Touch pad is also not working.

After placing the HFSPlus.efi - GitHub I rebuild cache and restarted, Now, its booted perfectly fine .. graphics are fixed but not the audio.. Thank you so much ...

Yes form USB only.

I restarted and Clover is showing no drive to boot to

placing HFSPlus.eufi in /EUFI/Clover/driver64UEFI Still one task is pending to complete Not sure where to find HFSPlus.eufi ? Should i reboot without placing HFSPlus.eufi in /EUFI/Clover/driver64UEFI ? sorry for the trouble I'm a noob in unix

HFSPlus.eufi is not there in /EFI/Clover/driver64UEFI from where to copy HFSPlus.eufi Although, I have removed all the kext files form the extension, then some error pops up after pasting those files "code commander was not installed correctly contact vender... something like this and there . there were 3 - 4 similar messages popped up.

How do i remove those kexts I installed ? manually deleting these files and how to repair permission rebuild cache

Clover showing nothing to boot. Image attached.

MacBook-Pro:~ A$ sudo kextcache -i/ kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Trackpad.kext kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Mouse.kext kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Keyboard.kext kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Controller.kext kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooHDA.kext kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext USBInjectAll.kext kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext RealtekRTL8111.kext kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext Lilu.kext kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext IntelGraphicsFixup.kext kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext GenericUSBXHCI.kext kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC.kext kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_Intel_HD_Graphics.kext kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_HD.kext kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID.kext kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ApplePS2Keyboard.kext kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ApplePS2Controller.kext kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ApplePS2SmartTouchPad.kext kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext AHCIPortInjector.kext kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ACPIBatteryManager.kext these command displays nothing sudo touch -f /L*/E* Sudo touch -f /S*/L*/E*

Thanks Jake for the reply, You are right, the EFI folder I have attached is from the internal EFI partition Folder. I installed the kext files through kext utility but I didn't copy those kext files inside the Colver 10.xxx folders. Do I have to copy those files inside those folders? The Extra Folder was originally inside usb stick which I copied it to my Internal EFI partition folder as I read somewhere this could fix HDD graphics issues.. NOW, as per your expert advise , I copied the EFI folder from USB stick to Inside EFL partition folder.. Booted successfully to OSX One thing I want to mention here that, I have to enter 0x000106E0 under Binary Paching under Clover Options to boot OS successfully, otherwise It crashes. I'm enclosing the kext files which I installed earlier, but after booting to OS I haven't installed anything please look at those files attached and tell me which file should I install. I request you to please give me an example for running commands to install kext form terminal. Kexts.rar

I'm attaching the EFI folder in case it is required for the fix . Dell Latitude 3540-EFI.rar

I have installed sierra successfully on my laptop but I am kind of stuck in post installations. My laptop configuration are as follows: as Shown In SMBIOS Intel Core i3 4005U @ 1.7GHz Board : 043T50 Intel Graphics HD4400 1366x768 Bios Ver: A06 on AHCI MODE (UEFI) Chiset : HM87 Express Full Specification here: https://www.cnet.com/products/dell-latitude-3540-15-6-core-i3-4005u-4-gb-ram-500-gb-hdd/specs/ To proceed with post installation I installed Clover_v2.4k_r4243 To fix sound and graphics I was browsing a forums and watching videos got some kext files and got it installed form kext Utility. It was fixed but I then messed around a little bit more to fix the HD4400 graphics and the sound gone ... LOL.. I'm not able to boot without the USB stick, When booting EFI form internal HDD, Clover in option Boot Args: shows nothing. When I try to boot form there the apple logo appears ones and then it restarts. Config.Plist is also attached.. Clover pic attached also attached below: Please guide me how to get this thing working.. I really appreciate if someone can help me out.. Thanks:) config.rar