nickelnoff

@Jake Lo This is the one that currently works. test.zip I am currently trying to convert the config.plist as per Clover wiki note: Rev 4504 Now clover-genconfig is able to produce all your injection keys used at last successful boot including automatic properties when inject=YES. But not including _DSM methods. 1. Boot as usual. New or old Clover revision. 2. Use new clover-genconfig to produce your current config.plist. 3. Update Clover to revision > 4500 4. Update you config.plist to switch off all injection including Graphics, Audio, LAN, USB 5. Disable all AddProperties and Arbitrary. 6. Insert new produced Device->Properties dictionary which will include all your old properties. I currently have config.plist.zip which I have constructed as per https://www.insanelymac.com/forum/topic/339696-solved-intel-hd-graphics-530-igpu-4k-monitor/?tab=comments#comment-2683044 but I think I am missing the KextToPatch which I am not sure how to proceed with.

Thanks @Hervé for the response - I'll be first to say I am pretty green when it comes to all of this so thanks for bearing with me ! With some help of folk over at insanelymac, I've managed to get things working. Not sure I am quite there yet in the full understanding but here for completions sake this what I am currently using. CLOVER.zip Now need to get the mDP, HDMI and TB3 working...

Boot seems to be failing once setting: Messages on boot screen: Is this a Framebuffer problem ?

I guess this is due to the base build of the MacBook 13,3 defined : https://everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-i5-2.0-13-late-2016-retina-display-no-touch-bar-specs.html @Jake Lo - Repeating exercise from a few posts earlier.

Not been able to make anymore progress. Just wondering why id 19260000 since according to link below this relates to Intel Iris Graphics 540: https://www.insanelymac.com/forum/topic/334899-intel-framebuffer-patching-using-whatevergreen/ I've already checked these out but will do so again. ID: 191B0000, STOLEN: 34 MB, FBMEM: 21 MB, VRAM: 1536 MB, Flags: 0x0000110F TOTAL STOLEN: 56 MB, TOTAL CURSOR: 1 MB (1572864 bytes), MAX STOLEN: 124 MB, MAX OVERALL: 125 MB (131608576 bytes) GPU Name: Intel HD Graphics 530 Model Name(s): MacBookPro13,3 Camelia: Disabled, Freq: 1388 Hz, FreqMax: 1388 Hz Mobile: 1, PipeCount: 3, PortCount: 3, FBMemoryCount: 3 [0] busId: 0x00, pipe: 8, type: 0x00000002, flags: 0x00000098 - LVDS [1] busId: 0x05, pipe: 9, type: 0x00000400, flags: 0x00000187 - DP [2] busId: 0x04, pipe: 10, type: 0x00000400, flags: 0x00000187 - DP 00000800 02000000 98000000 01050900 00040000 87010000 02040A00 00040000 87010000 ID: 191B0006, STOLEN: 38 MB, FBMEM: 0 bytes, VRAM: 1536 MB, Flags: 0x00131302 TOTAL STOLEN: 39 MB, TOTAL CURSOR: 512 KB, MAX STOLEN: 39 MB, MAX OVERALL: 39 MB (41422848 bytes) GPU Name: Intel HD Graphics 530 Model Name(s): Camelia: V3, Freq: 1388 Hz, FreqMax: 1388 Hz Mobile: 1, PipeCount: 1, PortCount: 1, FBMemoryCount: 1 [0] busId: 0x00, pipe: 8, type: 0x00000002, flags: 0x00000498 - LVDS 00000800 02000000 98040000

@Jake Lo - I just tried this but on the reboot following the permissions repair and cache rebuild the machine didn't; start up. On the Clover Options screen think I took the rights steps: Drilled down to Graphics > Selected the InjectId check box and changed the Igplatform-id and fakeID to 0x12345678 When the machine was back up I ran: sudo chmod -Rf 755 /S*/L*/E* sudo chmod -Rf 755 /L*/E* sudo chown -Rf 0:0 /S*/L*/E* sudo chown -Rf 0:0 /L*/E* sudo kextcache -i / Is there a decent utility for ˆ ? Then I rebooted and the screen was as shown below:

@Jake Lo - I tried that but the machine didn't boot up anymore and ad to revert to Clover on my USB stick. Here's what I set: Here's a photo I took of the screen when it didn't boot:

Thanks @Jake Lo for the suggestion. I tried as suggested the following however no difference.

Thanks @Bronxteck !

Thanks. Isn't the HD530 the same hardware as the P530? I thought it was but might be wrong. Anyway I have tried a number of different Ids: 191B0000 19120000 191B0006 I have set as shown: Any suggestions on what Id I might want to try ?

Slight change - found the following - Seems to provide me with all working USB ports ! Thanks @Jake Lo Just to confirm P530 is still trouble: To double confirm here is fresh EFI.zip and IOReg. nickelnoff-precision7510-200819-new.zip

Hey Folk - here goes first post I have lurked for a number of years and built a number of hackintoshes in the past but recently started looking at getting Mojave installed on my Dell Precision 7510. The specs are as follows: Intel(R) Xeon(R) E3-1505M v5(Quad Core 2.80GHz, 3.70GHz Turbo, 8MB 45W, w/Intel HD Graphics P530) Nvidia Quadro M1000M w/2GB GDDR5 Samsung 950 ProNVMe Drive Samsung 850 Pro 2 TB SSD At the moment I have Ubuntu and data stored on these 2 drives so the M2 interface has been disabled in the BIOS and the 2 TB SSD has been replaced with a new Samsung 860 1TB QVO SSD I am planning on purchasing a Broadcom Wifi card (any advise on what to get appreciated). I have been trying to build this all pretty slowly and understand all steps involved but been struggling to actually do this and have reverted to using an EFI\CLOVER folder that I found on a TM thread (#54). I tried for quite a few hours last night to build up my own EFI\CLOVER from scratch however could never quite get things booting. Not ideally what I wanted to do but I am sure this EFI\CLOVER might be a good starting point. I have disabled the dGPU using modified version of Dell_E6540_UEFI_eGPU_configurator_by_nando4 so I am now trying to get the IGPU P530 working. At the moment "No Kext Loaded" is shown however I have tried setting the AAPL,ig-platform-id to a supportable 191b from the actual 191d This seems to show in IOReg but something is not working or I'm missing something. I've attached EFI and IOReg - any help appreciated nickelnoff-precision7510-200819.zip

Thanks Jake ! Seems to be the place to come to get going with Dell hardware !

Hello Everyone - I just joined this forum so thought I'd say hi. Greetings !