kup1

Hello Herve, thank you for taking the time to look at my files. Success Finally USB3 is working using Jake's download and your suggestion. Thank you. I didn't realize/notice under the patches section there is a number 2, which takes you to page 2 and more patches, where darwin7 was. Do i need a patched DSDT or is it OK to run without one ? Not really fussed about the FN+F1 shutdown, but do you have any ideas about the ethernet that's not working, some of the other kexts i have tried have the correct pci ven+dev but they are not recognised.

New debug. debug_7037.zip

No joy, still coming up as USB2. After loading windows to check, there are definitely USB3 ports on the laptop. Thank you for taking the time, to try and solve my problem.

Hello Jake, removed kext30 from both clover and /L /E fixed permissions rebuilt cache and rebooted, and still showing USB2 ? I dont seem to have xhci, and there is no options for it in the bios.

Hello, finally got a little time, and trying to get USB3 working with my Mojave install. Using the latest version of Mojave and followed Jake Lo's install guide. Used the bootpack for 10.14.2 from the bottom of this page - The install went OK and fixed the card reader by changing 1 letter in the config file, thank you for that info in the other thread. ATM there' a few little problems, the USB3 ports are only seen as USB2, the ethernet isn't recognised, and FN+F1 shuts down the laptop. Tried a few guides earlier in the week but with no joy. Most guides where suggesting using a port limit patch (but i only have 4 usb ports) ? Tried some different kexts for the ethernet but they also didn't work, also tried what was suggested in the other thread, but no joy. Have uploaded my debug pack, any help would be appreciated, it would be nice to get those last few things working. debug_20338.zip

No worries Herve, i'll look for another solution, thanks for your time.

Hello @Hervé Thank you for pointing me in the right direction, i found your guide and the info i wanted was on page 3. So i edited the DSDT and copied your edits to the USB, i also copied the info for HPET (not sure if i should have done that) Downloaded the USB injector kext on that page (not sure i should have done this either) and installed it. But still in system properties no USB3 but the port still works as USB2. Touching on something else on page 2 of your guide there are edits for a FN + F1 shutdown fix, this is happening to me, but what you editied in your DSDT i could not find in mine, is there another fix for this ?

@Hervé thank you for the reply, i have not done that, only the steps in the tutorial and SD fix yesterday, is there a tutorial to do this on the site.

Hello again, looking for a bit more help, i wanted to ask that my laptop is supposed to have a USB3 port, but it shows as a USB2 in system properties, the port works fine, its just not USB3, can this be fixed or is this supposed to run as a USB2 port ? bios is A11 also used the bootpack on the bottom of the first page of this thread.

@Hervé Thanks for the reply. I followed Jake Lo instructions and that appears to have worked, thank you Jake Lo.

@eC//FrEaK Hello, thanks for all the info you posted, it help me along the way, also thanks to jake lo for his guide much appreciated. i wanted to ask you, in post 3 you said you got your SD card reader working with a kext, but you didn't mention which one it was, also its not in your clover folder, do you still have it or remember which kext it was ?