mr.kasper

Thanks for the advice! However, with this layout, the additional monitor did not start
I solved the problem by changing the argument:
AAPL,ig-platform-id 0500260A DATA (however: To be usually used with HD 5000, HD 5100 and HD 5200)....

It's still a problem. The main screen of the laptop shows an image when something moves on it. as soon as the picture becomes static, the image from the screen disappears (black screen). I recorded a video. ioreg file attached

MacBook Pro24.11.22.zip

attached file

MacBook Pro_with_monitor_1.zip

Thank you! There is already progress. when I booted from the config1 file (renamed it "without 1"), the laptop booted up with a black screen, an image with artifacts appeared for a second when I inserted / removed the usb flash drive, and connected the display port. When the display port was connected, the image on the additional monitor appeared, but the laptop monitor did not.

I apologize! File not attached

MacBook Pro_without_monitor.zip

I am connecting a DP to DP cable. The monitor says: the DP cable is connected, and after a while it writes that "there is no signal via DP". The monitor goes to sleep.

Thank you! Well, now when connecting/disconnecting the cable, the port display does not freeze the operating system. But there is no image on the additional monitor (the monitor goes to sleep)

Thanks, but monitor not work.

MacBook Pro.ioreg

So, when I connect the cable, the operating system freezes (only a hard reboot on the button helps)

Yes, I did reset nvram. But no result.. Any other ideas?

No, This change did not help. The monitor still does not work through the DP

Hi everyone. I managed to start Monterey on my old 650g1, (i5, 8GB, ssd.) The system works quickly, without logs. But how do you make the display port work? My loader and config file are in the attachment.

config.zip

brcmbluetoothInjector.kext blocked the system. Removed it from the config - and everything worked! The installation of the system went to the internal ssd

what is the name of this pest?

Thanks for the advice. I tried the kext data - the result is bad (the installer does not see the disks). I have two 650g1 laptops. Two laptops do not see disks during installation. In the BIOS, the disks are visible, on these disks there are "combat" working systems. Windows / fedora. What am I doing wrong. ? My efi is in the attachment

EFI.zip

This is my new efi folder and config file. With it, the installer does not see disks (as per above screenshots). What could be the problem? However, when choosing a boot disk, there is an SSD disk.

EFI.rar

Hello! Yes, I added this kext to my folder and updated the config file. But still, the situation is the same. disks are not visible to the installer, although the ssd is visible when booting. did you download my EFI folder from google cloud, did you watch it?

Again, after your files, the installer does not see the disk .... (Where is the error in the settings?

But the Windows operating system is installed on this disk. I tried other SSD drives (SanDisk, Kingston). I also tried regular HDD. The installer does not see disks.

When choosing a disk from which to boot the system, the disk is visible (this is an old disk from another computer on which Mojavi is installed). But there is no ssd in the installer.

yes, sure! In the attachment! And screenshots from bios and disklist

EFI turned out to be big, I uploaded it to google cloud

https://drive.google.com/file/d/1e8FwcdCRED_GM2IHydqLzPXU5xxRYE29/view?usp=sharing

Hello! Thank you for the kehe. But no result. BIOS settings are set to UEFI / AHCI enabled. The system does not see internal disks.

What else can be done about this problem?

Hi all!
Can someone tell me, the laptop does not see hard drives. I tried both ssd and hdd. Disk Utility only sees the flash drive. Tell me, what's the matter? Maybe a driver forgot?
PS: I install through Openсore, Monterey