deselitor

My BIOS Setting: Disable: Secure Boot -> Secure Boot Enable -> Disabled Intel Software Guard Extension -> Intel SGX Enable -> Disabled General -> Advanced Boot Options -> Enable Legacy Option ROMs -> Disabled Enable: System Configuration -> Integrated NIC -> Enabled But not tick the entry: Enable UEFI Network System Configuration -> SATA Operation -> AHCI System Configuration -> Thunderbolt Adapter Configuration -> Enable all entries and select Security level - No security as suggestion, I enable quirk SyncRuntimePermissions. I reset NVRAM at OC Picker when I reboot after changing the config file. But unfortunately, it still doesn't work. I have attached the current state of the config.plist. config.zip

I change KBL frame buffer layout to 0x59160000 by change the AAPL,ig-platform-id key to be "00001659". also, I reinstate the line that allows patching of connector con1 and probably the 2 lines that patch DVMT settings and clear out all the remaining commented out lines from config file. Then, I reset NVRAM at OC Picker when I reboot after changing the config file. But unfortunately, it still doesn't work. I have attached the current state of the config.plist. config.zip

Hi all, Dell Latitude 7480 - Core I7 - 7600U Intel HD graphics 620 SSD: LITOEN CV3-BD512- 11 SATA 512GB FHD screen: 1920x1080 (non-touch) I have a grey screen with a moving mouse cursor when I boot from a USB installer (Ventura) or (Monterey) recovery image downloaded from here. So it seems to "boot up". But instead of showing any UI, it shows a grey screen. I have tried the attached configuration and also the one in this thread. However, both have the same results. Then I read this thread. and I injected my EDID with the hex data obtained as per this link, also removed fbmem and stolenmem from config.plist, and executed setup_var 0x795 0x2 and setup_var 0x796 0x3 in a modified GRUB shell. But unfortunately, it still doesn't work. Is there another obvious thing to try? I have attached the current state of the config.plist. config.zip