rwsgamer

Hi Macnb, What motherboard model do you have in your Inspiron 530? From the list, Inspiron 530 can only support dual core models, but E5450 is quad core...

Made both changes in the /Extra/org.Chameleon.Boot.plist: <key>Graphics Mode</key> <string>1920x1200x32</string> <key>UseKernelCache</key> <string>No</string> Note: I am working with a docking station, so the resolution is changed to 1920x1200. It is kind of inconvenient whenever I undock the laptop, will need to change this file again to set the resolution back to 1440x900. thanks

Maverick 10.9.4. Will try the latest graphics file and report back tonight. Thanks

Tried to setup my E6410/Intel for Mavericks by following pratel4prez's guide, and Jake Lo's instruction for Intel Graphics. Hope I can get help with the couples issues: First, my machine: Dell Latitude E6410 - BIOS version A16 - Chipset: Intel QM57 - CPU: core i5 520M - RAM: 4G - Graphics: Intel Graphics (1440x900 resolution) - Network: Intel 82577LM / WiFi link 6000 series - OS X: Mavericks 10.9.4 - hard drive: 3 primary partitions with MBR, dual-boot with Win7 through chameleon Issues: 1. Install with display problem: If I following Jake Lo's instruction strictly, remove the AppleIntelHDGraphicsXXX files from SLE first, then install Extra-E6410_Mav.zip into the install USB drive. During the installation, at the point the display switch over to graphics, the display shows lot of garbage (same image repeated multiple times). After many trials, worked around this problem by not installing the Extra-E6410_Mav.zip 2. Only boots successfully with ignore cache option: With the work-around to skip the extra from Jake, the installation was successful. But in all subsequent reboot, have to use the ignore cache option, otherwise the boot process will hang. If boot with only the verbose option, here is the last couple of lines: .... Initializing TouchPad hardware...this may take a second ApplePsALPSGlidePoint EC Report: { 0x88, 0x07, 0x9d } ApplePsALPSGlidePoint EC Report: { 0x88, 0x07, 0x9d } ApplePsALPSGlidePoint EC Report: { 0x88, 0x07, 0x9d } ApplePsALPSGlidePoint EC Report: { 0x88, 0x07, 0x9d } ApplePsALPSGlidePoint EC Report: { 0x88, 0x07, 0x9d } Touchpad initialization complete VM Swap Subsystem is ON Waiting for DSMOS... SMC::smcReadKeyAction ERROR $Num kSMCKeyNotFound(0x84) fKeyHashTable=0x0 Controller: INtel PCH (vendor ID: 8086, device ID: 3b56) init probe start [iOBluetoothHCIController[[start] -- completed VoodooBattery 1.3 © 2008-10 Superhai, All Rights Reserved. May 5 2010 09:52:50 64 bit No interval found for . Using 8000000 flow_divert_kctl_disconnect (0): disconnecting group 1 SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0 SMC::smcGetLightshowVers ERROR: smcREadKey LsNM failed (kSMCKeyNotFound) SMC::smcInitHelper ERROR: smcPublishLIghtshowVerion failed (kSMCKeyNotFound) Previous Shutdown Cause: 3 SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode DSMOS has arrived AppleIntelE1000e(Info): e1000e NIC Link is UP 1000 Mbps Full Duplex, Flow Control: Rx ACPI_SMC_PlatformPlugin::start - waitFor Service(resouceMatching(AppleINtelCPUPowerManagement) timed out [AGPM Controller] unknownPlatform 3. Max resolution only 1280x800 for 1440x900 screen. Any idea on how to solve issue #2 and #3? Thanks