ghostinthemirror

O.k., we must look, what is the difference. 1. Which Bios Version you have? I've 1.11.0 installed. 2. Which Clover Version you use? Should be 5xxx Version not a 4xxx. The directory structur has changed. 3. Which CPU have you installed? Maybe you have to generate a SSDT. Mine is working without it(i3 7100T). 4. What happened when the installation stops (screenshot from verbose mode). 5 Can you start/install with the additional boot option -igfxvesa? 6. How much RAM you've installed? If you can't even start the installation, then try to set/activate all options in the 'Kernel and Kext Patches' Section of Clover Greetings Lutz

I dont hope that leaf389 has given up, My last postet configuration is absolutly stable (with sound !) BUT, when I try to wake up after sleep then I've a short activity blinking of the HD-LED and thats all. blach screen and no further activities. I've exactly to do two things to reanimate the machine: 1. Long press the power button until the cpu/systen fan turns off 2. Short press the power switch Power LED turns on and after a few seconds the machine turns completely off itself Now I can press power on and it boots normal and no hint that anything was going wrong. What happened? That's misterious. Can I fix this or is it true that it can't solved for Kaby Lake CPU and HD630 Intel graphics? Thanks for each helpful hint ------------------------------ Hm. have you used my complete clover and my config.plist for testing? The injection for Audio is 11 all other ID were more or less not successful. Have .you taken the same kexts from my clover upload and put it to kexts/other? Is the internal audio activated in the Dell bios? What Bios Version you use? What is about HDMI Audio? Greetings Lutz

It's the new structure from the clover 5xxx series. Catalina and Mojave works! CLOVER 2.zip

Read my original thread - the problem is solved.

One little mistake ... con1 must be con0 con2 has to become con1 you had no con0 but con0 is HDMI ! Colors ok, HDMI sound works. You made my day and many thanks to Hervé for analyzing (some posts before) And leaf389 should read it, his audio problem ist solved also. Archiv.zip

@Jake Lo Your last config brought no changes in result. lastconfig.zip

@Jake Lo Ashes to my head ... Attached the original output from Catalina with one correction: iMac 18,2 is completely unusable I had to take 18,1. CatalinaWithoutCons.ioreg

First I'll try the modified plist from Jake Lo and than I make the IORegOutput. Thanks so far. Just tested - it stays pink. The attached output includes the connector parameters from the last plist. Is this really helpful, Should I better make it under HS, and with wich clover boot options? OP3050.ioreg So, and now the output under Highsierra with all framebuffer-con entries DISABLED.: IOREGHSohneCons.ioreg

I did all the recommended Framebuffer-con1 entry's . Sadly it helps nothing. The Desktop stays pink. For interest I installed a HighSierra 10.12.6 and all is fine, nearly ... Acceleration o.k., Colors O.k., bot no sound over HDMI. Internal sound works. By the way, the effects in Mojave and Catalina are the same (pink) and also in both no sound over HDMI like in HighSierra. To my unanswered Question: The Bios Version has nothing to do with my Problems? Then it makes no sense to crash around with older and never versions?! By the way : Bios Reset to defaults I've done yet. My actual config.plist I've attached. config.plist.zip

Many Thanks, my iGPU is now accelerated, but the Desktop is pink ( and green ). This is the state of my preinstalled catalina 10.15.1. By the way, am using the BIOS 1.11.0. Not relevant , or not so good? Just now I'm about to install mojave but it seems, the color problem will be the same. Maybe you know, what's going wrong.

It' s really not my first Hackintosh but I've come to the point to give up. What's my problem? Since 2 weeks I own the Optiplex 3050 MFF. Wit 4GB ( in between 16GB) RAM and preinstalled Windows 10 pro. The Computer works without any problem (Windows) The CPU is a i3 7100T (Kaby Lake) wih HD630 iGPU. SSD is only a 128GB but not a subject of my problem. Own first experiments with clover - witout success ++++++++++++++++++++++++++++ and freeze. O.k. you have to learn - it's my 1st CPU of a higher generation than Haswell. No problem I take for the first help working EFIs bzw Clovers from others. I found five examples and they all failed. Booting is not my Problem anymore, it has to do something wih the CPU Powermanagement ( Clover Flags or generating special ssdt for the i3 7100 ). Sadly not one of the example configurations were able to make my iGPU working to be honest all ends in KP ( memory panic stackshot ). Only the boot variable -igfxvesa works without accelleration and at this moment I've no clue to come a step forward. I've read many hours how to solve the problem. The more I read the more the confusion is growing. I try to reduce the variables leading me into this state. 1. Witch Bios shoud I use. I've a Collection of all published Bioses for the 3050 from DELL. 2. Have I possibly to patch something/anything with the grub shell? 3. and/or is this obsolete and lilu and whatevergreen will do all things (incl. DVMT patch) for me. Are other kexts and Clover flags now obsolete and should all? be removed? Before I forget it, My Plan is, to install MOJ and possobly CAT. My last question - can anyone help me? Many Thanks.