loibi93
-
Posts
34 -
Joined
-
Last visited
Content Type
Profiles
Articles, News and Tips
Forums
Posts posted by loibi93
-
-
If i use the vanilla Framebuffer, will this break my DisplayPort ?
-
Do you have the vanilla Framebuffer ? I don't have it anymore !
with best regards
EDIT: Works with patched framebuffer, so thanks very much !
-
Hello everyone !
I have updated from 10.10.1 to 10.10.4 today, and it went quite smoothly.
After fixing the kernel, the System booted, and as expected the Graphics were not
working yet. So i installed the patched Azul Framebuffer kext with Kext Utility and restarted,
but i still didn't have good Graphics. It worked fine before the update, and the only thing that
changed is the framebuffer kext which i reinstalled (i took it from this forum from the dell latitude tutorial).
Has anyone an idea why it is not working ?
I use clover, the config file is attached !
The HD4400 is injected in DSDT !
with best regards
-
Solved it, the problem was that display output was set to Displayport first ! I set it back to Internal LCD and it worked !
-
Wrecked Laptop:
Lenovo ThinkPad T440s
i5-4200U @ 1.6GHZ
HD4400
SSHD 500GB
12GB Ram
New Laptop:
Lenovo ThinkPad T440s
i5-4210U @ 1.7GHZ
HD4400
SSD 256GB
12GB RAM
BIOS are the same Version !
I installed Yosemite on the Wrecked Laptop with the help of Dinesh Kumar who is one of the DSDT Patchers here, i think you know him.
Everything worked fine, so i know which kexts i have to use, which Clover Config i need, and also i still have the correct DSDT and SSDTs which he patched for me.
Then the Laptop got wrecked, but still worked fine with a monitor attached to it.
Then i got the new Laptop which is basically the same. Since i use it the most, i put the SSD from the wrecked Laptop in it. SInce it didn't just boot from the SSD i had to install Yosemite from ground up. I used all the files i already used on the wrecked Laptop. After some tinkering i got it to work.
SInce the Display on the wrecked Laptop is unusable i had to configure in the BIOS to output to DisplayPort instead of BuiltIn Display. I managed that by controlling both Laptops simultaniously side by side, so i can see on the new Laptop where i am navigating to.
Then I created the unifail Stick, put all my Kexts and ACPI Tables on it. Also i swapped the original Framebuffer Kext with the patched one i also use in the new Laptop. It works fine in the new Laptop, and also worked fine in the old Laptop. Also i patched the Kernel on the installer Stick for Haswell Reboot.
After some tinkering i got into the Installer and installed Yosemite. After Reboot i booted into the installer to copy the patched Kernel onto my Hard Drive. I then was able to boot with Clover. I attached my Config.plist so you can have a look.
I can boot without save mode, but i don't have QeCi. DSDT is patched for my HD4400, so it should recognize, but it doesn't. I also tried to inject ig-platform-id with Clover but no success. Then i thought that something went wrong with the Kext during the install, so i reinstalled it with Kext Utility, but after reboot the Laptop restarts when it should show the log in screen.
I hope i didn't forget anything and you can help me nowhttp://www.file-upload.net/download-10099432/config.plist.html
-
I had an ssd in the wrecked laptop. The new laptop shipped with an sshd. I swapped the two drives. I had to reinstall on the new laptop and obviously on the old too since the sshd was empty !
Do you mean by generating a new kernel cache that i should give Kext Utility a go ? If yes, i already did !
BIOS settings are correct, since Yosemite worked on the wrecked Laptop !
-
They have, but Yosemite was already installed on my wrecked laptop and everything worked fine ! I only have to reinstall because i swapped the drives between the two laptops !
Wrecked Laptop: i5-4200U HD4400
New Laptop: i5-4210U HD4400
-
Framebuffer i downloaded from your guide for E7440 ! I have the same kext for my new Laptop where it works just fine !
kernel was patched with RehabMan Tutorial for Haswell Early Reboot (Yosemite Edition)
-
Hello everyone !
Since my old laptop has a cracked screen i can't use it as a normal laptop, but everything else works fine, so i thought i can use it as a desktop machine with attatched monitor.
I have a HD4400 which requires a patched Version of AppleIntelFramebufferAzul.kext for working DisplayPort Output. Also i need a patched kernel for Haswell CPU.
I created my Boot Drive on my current Laptop with unifail. I put my necesarry kexts in Extra Extensions. DSDT and SSDTs in Extra, and replaced the AppleIntelFramebufferAzul.kext and kernel files with the patched ones. I was able to install with -f -x -v
After that i only had to recopy the kernel file to my hard drive. I plugged in a usb drive with clover configured correctly for this laptop (After this one broke, i bought the exact same one again, so i can use the files from that one). I can boot with only kext-dev-mode=1, but unfortunately i don't have QeCi. So i installed the patched AppleIntelFramebufferAzul.kext with Kext Utility, but when i start, the Laptop restarts after Bluetooth Missing Message. When i boot into installer and rename the .bak to .kext it boots again, but with no QeCi !
Why does it work on my current laptop but not on that one. Before it broke i already had Yosemite installed on it, but i swapped the drives, because the new one only had an sshd and this one an ssd.
Any Suggestions ? -
Use Edimax EW-7811Un for WiFi !
It has very good Performance for its Size which is very small !Drivers are available on their Homepage !
-
Ok, thanks very much !
-
Thanks so much, finally it works
In case of an Update, where do i get the new Version ? -
It seems that the patched Framebuffer Kexts are only for 10.9.5 but i have 10.10 ! Is there a patched one for that ?
-
Anything new ?
Is there still no fix for this issue ?
-
I solved it by booting my backup, erasing the drive, partitioned it with mbr and then guid and installed clover again. After that i installed Yosemite again.
-
Jep, freeze on DP plugin !
-
Do you know if it works in Yosemite ?
-
Hello !
I installed Yosemite today, and everything works fine, but i still have to boot with my USB Pen Drive !
I installed Clover first with ESP Method and after that not working with boot0af Method. I always get this error:GPT: boot0 error
GPT: boot0 error
GPT: boot0 error
GPT: boot0 error
I also tried the solution with unmounting the drive and then in terminal: dd if=/.....
-
Ok thanks, thats very unfortunate !
-
Specs:
CPU: i5-4200U 1.6Ghz
RAM: 12GB DDR3
Graphics: Intel HD 4400 @ 1920x1080 (IPS)
Storage: LiteOnIt SSD 256GB
Wireless: Edimax EW7811-UN
OS: OSX 10.9.4 Mavericks
BIOS settings:
Set all to default.
Then set Security-> Memory Protection-> Execution Prevention: Enabled
Disable All Security related Options (Security Chip, Fingerprint...)
What's working:
Full QE/CI
Keyboard and trackpad (multitouch)
Audio
Brightness Slider (FN+F5 and F6))
Sleep and Wake with Lid
Wifi
Webcam
Microphone
Headphones with autodetect
Installation:
I use the myhack method for this build, so follow instructions to build your USB installer, set BIOS settings and run the OSX Installation from here http://myhack.sojugarden.com/guide/
- After creating your USB installer, run myHack again
- Select Install Extra and point to the Extra folder attached (extract it first) Extra.zip
- In BIOS don't forget to change your Bootdevice
- Boot up system with USB installer disk (you'll see a white, then a gray screen with cursor only, just wait)
- Eventually you get to the screen to select Language
- Format the HDD per instruction from myHack site
- Select "Use my Own" when prompt and point to the Extra folder in the root of the USB installer drive
- Delete the (3) files when prompt
- A few minutes later, it will automatically reboot. Remove the USB installer drive
- After reboot you can install the WLAN drivers from here: http://www.edimax.com/images/Image/Driver_Utility/Wireless/NIC/EW-7811Un/EW-7811Un_Mac_driver_v1.0.0.5.zip
- Finally run MyFix from MyHack.app
- Enjoy
- Run this to update Kexts: http://www.osxlatitude.com/edp/documentation/
-
Hello !
As expected my Laptop freezes when plugging in the DisplayPort Cable, so i applied the Fix from HVT (install 10.9.1 IntelAzul), rebuild caches and restarted. Although i get an output i don't have FullQeCI anymore ! So no translucent bar and flickering everywhere. I checked in Kext Wizard, and it says that AppleIntelAzulFramebuffer.kext is loaded, but not the HD5000 kext ! I have DSDT injected IDs and before the patch QeCi worked perfectly ! Any Suggestions ?
-
I sent all the files for my Lenovo Thinkpad T440s !
Specs:
- Intel Core i5-4200U Haswell
- Intel HD4400
- 12 GB RAM
- LiteOn SSD 256GB
- Edimax USB Wlan Dongle
- Synaptics Trackpad
Whats working:
- Normal use of System (WLan, Graphics, Sound, Stable use, no -x or -f)
- Multitouch Trackpad (Voodoo)
- Battery Meter
- Power Management (DPCIManager shows a lot of P-States !)
What's not working:
- Sleep (tried to use Clover generated DSDT but Laptop won't wake up)
- Brightness Control (Slider is here but doesn't do anything)
I tried to fix Brightness, but my Graphics Device is spread over the DSDT and 2 SSDTs and the tables are very bugged overall, so please fix it from the ground up, i also will Sponsor for a faster delivery time since you deserve that money for doing (hopefully ) a great job of patching !
With best regards
-
Hello everybody ! I got my Laptop close to finish, only Sleep and Brightness needs to be fixed, but unfortunatelly i can't fix it myself. I tried but i only get errors with which i can't deal ! It would be very nice if someone could fix sleep, sleep on closed lid, brightness control and brightness keys for me
-
Hello !
I created a clean Install Stick with Mavericks 10.9.4 (myHack) and patched the mach_kernel acoording to Rehabmens Tutorial.i applied both Patches and checked the md5 sums, they match with the ones he provided ! Nevertheless i get the early reboot after the kexts finish loading ! Anyone a clue whats going on ?
EDIT: I had to turn on Memory Protection in BIOS to make it work !
HD4400 won't work in 10.10.4
in The Archive
Posted
Hello !
I was having issues with my edimax ew-7811un USB Wlan Dongle for quite some time now, but i noticed that it was fine sometimes, but today i finally found the reason why it is not working sometimes. Whenever i plug in a Monitor (DisplayPort) i get much lower Internet speeds and Connection Issues ! Does anyone have a clue why that could be ? If i use this stick with another OS i don't have these Problems ! Does anyone know why this could be ?
UPDATE:
Ok, I also get these issues when not connected to a monitor, maybe there is something wrong with my USB Drivers ?