welp

No. I bought the card online. I know it works because it was working with 10.8.

Yes, everything is set to on. Looking at the chip now, it is BCM4311KFBG.

Just did a fresh install and the WIFI is not automatically found. Nothing is being shown for the wifi. When I look in the EDP tool, I don't see any drivers for it.

I am doing a fresh install now. I took note of all the changes I made and Will see how this goes.

Sorry I meant Jake Lo's post. When I loaded the OS, the wifi icon didnt show up. So I followed his steps and I see the wifi icon but it wont let me do anything with it.

Yes I was able to boot.. Thanks for the help on that one. Herve- I tried following your guide on getting the wifi to work, I see the wifi icon on my task bar, but if i click it, the mouse shows busy. I have done the terminal server stuff as well. Any ideas. Last login: Mon Oct 28 09:14:23 on console Dans-MacBook-Pro:~ Dan$ lspci -nn pcilib: 0000:01:00.0 64-bit device address ignored. 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c) 00:01.0 PCI bridge [0604]: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port [8086:2a01] (rev 0c) 00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) 00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) 00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02) 00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 02) 00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 [8086:2849] (rev 02) 00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) 00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) 00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) 00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f2) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815] (rev 02) 00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 02) 00:1f.2 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode] [8086:2828] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G86M [Quadro NVS 135M] [10de:042b] (rev a1) 03:01.0 CardBus bridge [0607]: O2 Micro, Inc. Cardbus bridge [1217:7135] (rev 21) 03:01.4 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. Firewire (IEEE 1394) [1217:00f7] (rev 02) 09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express [14e4:1673] (rev 02) 0c:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 02)

I am sure its somewhere in the forum, but how do I unlock the file to edit? Also, do I just remove that line and save?

I figured it out. I had to unhide all the files. In terminal: defaults write com.apple.finder AppleShowAllFiles TRUE killall Finder Found that the mach_kernel file was in there. Here is a copy of my Chameleon boot plist (in /Extra). Does this look correct? <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>EthernetBuiltIn</key> <string>Yes</string> <key>GenerateCStates</key> <string>Yes</string> <key>GeneratePStates</key> <string>Yes</string> <key>GraphicsEnabler</key> <string>Yes</string> <key>Kernel</key> <string>mach_kernel</string> <key>Kernel Flags</key> <string></string> <key>PciRoot</key> <string>1</string> <key>SystemType</key> <string>2</string> <key>Theme</key> <string>Default</string> <key>Timeout</key> <string>2</string> <key>arch</key> <string>i386</string> <key>UseKernelCache</key> <string>Yes</string> </dict> </plist>

Herve- I have the mach_kernel and dragged it to my desktop. I was able to get it off the installer as you noted. I cant drag it to the root of the drive cause it says " The item"mach_kernel" cant be replcaced because it's invisble. Have you see that before.

So I just finished up the EDP tool. I havent rebooted yet, but i ran the ls -la in terminal and I dont see the mach_kernel file. Where get I get this file and place it in the root?

After loading the OS back and re-running EDP. The error I get is a boot. It says Missing Mach_Kernel. I have no way to boot back in the system. Any ideas?

I am in the middle of reloading the OS on there now. Once it is done, I will try it again and post a pic. In the meantime, I have another D830, that is running, but would like to get the wifi to work. I am just testing out the differences.

Any ideas on getting the wifi card to work, its the broadcom card, not sure the model but its the recommend one.

Yes, I did the EDP System Build. Opened Up EDP, selected my system and let it go to town.

I need some help here. I have a D830 with a Broadcom wifi card and a Nvidia graphics card. I can get the OSX installed no problems. But when I try to load the EDP pack, after it reboots, it crashes, it wont boot back up. Any ideas?