mikewse
Members-
Posts
30 -
Joined
-
Last visited
Profile Information
-
Gender
Not Telling
-
Location
Sweden
mikewse's Achievements
Advanced Member (5/17)
0
Reputation
-
Startup hanging after EDP update and config on D430
mikewse replied to mikewse's topic in The Archive
Sorry Hervé, I'm a regular Unix guy with no real insights in the inner workings of EDP. Running myfix was unknown to me until post #18 :-S Bringing the machine up with your /Extra was better this time (I notice a new splash screen, a "chromish" apple instead of the previous OSXlatitude logo) and I have keyboard. I still don't have full network though - System Settings say Ethernet is connected but I have no route to remote hosts, even if I enter IP settings manually. I'm travelling for a week now so I will return to try to fix this when I get back. I hope I'll meet you here on the forums again then Thanks for all the help so far Mike -
Startup hanging after EDP update and config on D430
mikewse replied to mikewse's topic in The Archive
I entered the settings just like you wrote, so either the EDP installation is broken or the behaviour of EDP rev 679 is unexpected for both of us. Even to me as a layman the end result in /E/E doesn't look like it corresponds much to what I entered. F ex, could I even make EDP settings to get several different battery kexts installed? I noticed that EDPweb listed the myHack keyboard driver you recommended as 64-bit, and you warned me about 64-bit, could this have something to do with things? Yes, if it is feasible to hack this manually I think it would be the best. I did try your Extra folder back in post 4 without any improvements (but lost keyboard). But then I just replaced the folder without running myfix, is that the important part? Here's the current contents of my /Extra folder: /Extra: total 104 drwxrwxrwx 16 root wheel 544 20 Jan 23:37 Extensions drwxrwxrwx 4 root wheel 136 18 Jan 13:27 Themes drwxrwxrwx 22 root wheel 748 18 Jan 13:26 bin -rwxrwxrwx 1 root wheel 3640 20 Jan 21:31 build.log -rwxrwxrwx 1 root wheel 19680 20 Jan 21:28 dsdt.aml -rwxrwxrwx 1 root wheel 91 18 Jan 13:26 edptool.command drwxrwxrwx 6 root wheel 204 20 Jan 21:25 include -rwxrwxrwx 1 root wheel 6211 18 Jan 13:27 kpload.log drwxrwxrwx 4 root wheel 136 18 Jan 13:27 model-data drwxrwxrwx 4 root wheel 136 20 Jan 21:28 modules drwxrwxrwx 4 root wheel 136 18 Jan 13:27 myHack.kext -rwxrwxrwx 1 root wheel 1019 20 Jan 23:44 nvram.44454c4c-4c00-1053-8059-b4c04f33334a.plist -rwxrwxrwx@ 1 root wheel 665 20 Jan 21:28 org.chameleon.Boot.plist -rwxrwxrwx@ 1 root wheel 691 20 Jan 21:28 smbios.plist drwxrwxrwx 12 root wheel 408 18 Jan 13:27 storage -rwxrwxrwx 1 root wheel 26 18 Jan 13:27 update.command /Extra/Extensions: total 0 drwxr-xr-x 3 root wheel 102 20 Jan 21:28 AppleACPIBatteryManager.kext drwxr-xr-x 3 root wheel 102 20 Jan 21:28 AppleACPIPlatform.kext drwxr-xr-x 3 root wheel 102 20 Jan 23:37 AppleBCM5751Ethernet.kext drwxr-xr-x 3 root wheel 102 20 Jan 21:28 AppleIntelIntegratedFramebuffer.kext drwxr-xr-x 3 root wheel 102 20 Jan 21:28 AppleSmartBatteryManager.kext drwxr-xr-x 3 root wheel 102 20 Jan 21:28 AppleSmartBatteryManager2.kext drwxr-xr-x 3 root wheel 102 20 Jan 21:28 FakeSMC.kext drwxr-xr-x 3 root wheel 102 20 Jan 21:28 NullCPUPowerManagement.kext drwxr-xr-x 3 root wheel 102 20 Jan 21:28 Patched_10.7_AppleRTC.kext drwxr-xr-x 3 root wheel 102 20 Jan 21:28 SleepEnabler.kext drwxr-xr-x 3 root wheel 102 20 Jan 21:28 VoodooBattery.kext drwxr-xr-x 3 root wheel 102 20 Jan 21:28 VoodooPState.kext drwxr-xr-x 3 root wheel 102 20 Jan 21:28 VoodooTSCSync.kext drwxr-xr-x 3 root wheel 102 20 Jan 21:28 lspcidrv.kext /Extra/Themes: total 0 drwxr-xr-x 69 root wheel 2346 18 Jan 13:27 Default /Extra/bin: total 23128 -rwxr-xr-x 1 root wheel 21228 18 Jan 13:26 DELLBiosPWgen -rwxr-xr-x 1 root wheel 4190 18 Jan 13:26 PlistParser.inc drwxr-xr-x 4 root wheel 136 18 Jan 13:26 backup -rwxr-xr-x 1 root wheel 9560 18 Jan 13:26 bdmesg -rwxr-xr-x 1 root wheel 2634 18 Jan 13:26 config.inc.php -rwxr-xr-x 1 root wheel 504 18 Jan 13:26 edp.php -rwxr-xr-x 1 root wheel 94208 18 Jan 13:26 edp.sqlite3 -rwxr-xr-x 1 root wheel 96 18 Jan 13:26 edptool.sh drwxr-xr-x 10 root wheel 340 18 Jan 13:26 fixes -rwxr-xr-x 1 root wheel 27180 18 Jan 13:26 functions.inc.php drwxr-xr-x 22 root wheel 748 18 Jan 13:26 html -rwxr-xr-x 1 root wheel 669 18 Jan 13:26 launch.php -rwxr-xr-x 1 root wheel 70692 18 Jan 13:26 lspci -rwxr-xr-x 1 root wheel 42192 18 Jan 13:26 mirror -rwxr-xr-x 1 root wheel 36534 18 Jan 13:26 myfix -rwxr-xr-x 1 root wheel 11462648 18 Jan 13:26 php -rwxr-xr-x 1 root wheel 29488 18 Jan 13:26 sleepdisplay -rwxr-xr-x 1 root wheel 486 18 Jan 13:26 update.sh drwxr-xr-x 4 root wheel 136 18 Jan 13:26 vendor /Extra/include: total 16 drwxr-xr-x 4 root wheel 136 20 Jan 21:26 Extensions -rwxr-xr-x@ 1 root wheel 665 20 Jan 21:25 org.chameleon.Boot.plist -rwxr-xr-x@ 1 root wheel 691 20 Jan 21:25 smbios.plist /Extra/include/Extensions: total 0 drwxr-xr-x 3 root wheel 102 20 Jan 21:26 FakeSMC.kext /Extra/model-data: total 0 drwxr-xr-x 4 root wheel 136 18 Jan 13:27 Dell_Latitude_D4x0 /Extra/model-data/Dell_Latitude_D4x0: total 0 drwxr-xr-x 7 root wheel 238 18 Jan 13:27 common /Extra/model-data/Dell_Latitude_D4x0/common: total 56 -rwxr-xr-x 1 root wheel 19680 18 Jan 13:27 DSDT.aml drwxr-xr-x 3 root wheel 102 18 Jan 13:27 Extensions -rwxr-xr-x 1 root wheel 848 18 Jan 13:27 org.chameleon.Boot.plist -rwxr-xr-x 1 root wheel 744 18 Jan 13:27 smbios.plist /Extra/model-data/Dell_Latitude_D4x0/common/Extensions: /Extra/modules: total 112 -rwxr-xr-x 1 root wheel 56136 20 Jan 21:28 FileNVRAM.dylib /Extra/storage: total 608 drwxr-xr-x 4 root wheel 136 18 Jan 13:27 LaunchAgents drwxr-xr-x 11 root wheel 374 18 Jan 13:27 apps -rwxr-xr-x 1 root wheel 310784 18 Jan 13:27 boot drwxr-xr-x 5 root wheel 170 18 Jan 13:27 fixes drwxr-xr-x 13 root wheel 442 18 Jan 13:27 kexts drwxr-xr-x 8 root wheel 272 20 Jan 20:35 kpsvn drwxr-xr-x 12 root wheel 408 18 Jan 13:27 modules drwxr-xr-x 5 root wheel 170 18 Jan 13:27 prefPanes drwxr-xr-x 8 root wheel 272 18 Jan 13:27 standard and here is the contents of your Extra folder: /Extra.herve: total 64 drwxrwxrwx 17 root wheel 578 7 Dec 10:19 Extensions drwxrwxrwx 5 root wheel 170 13 Okt 11:24 Themes -rwxrwxrwx@ 1 root wheel 19757 13 Okt 12:51 dsdt.aml drwxrwxrwx 5 root wheel 170 18 Jan 01:24 modules -r-------- 1 root wheel 2003 26 Dec 12:02 nvram.44454c4c-5a00-1037-8059-cac04f56334a.plist -rw-r--r--@ 1 root wheel 665 18 Jan 01:25 org.chameleon.Boot.plist -rwxrwxrwx@ 1 root wheel 691 18 Jan 01:26 smbios.plist /Extra.herve/Extensions: total 0 drwxr-xr-x 3 root wheel 102 24 Sep 03:47 AppleACPIPS2Nub.kext drwxr-xr-x 3 root wheel 102 12 Okt 22:02 AppleACPIPlatform.kext drwxr-xr-x 3 root wheel 102 12 Okt 22:02 AppleBCM5751Ethernet.kext drwxr-xr-x 3 root wheel 102 12 Okt 22:02 AppleHDADisabler.kext drwxr-xr-x 3 root wheel 102 12 Okt 22:02 AppleIntelIntegratedFramebuffer.kext drwxr-xr-x 3 root wheel 102 24 Sep 03:47 ApplePS2Controller.kext drwxr-xr-x 3 root wheel 102 26 Aug 2011 CSRUSBBluetoothHCIController.kext drwxr-xr-x 3 root wheel 102 12 Okt 22:02 CellPhoneHelper.kext drwxr-xr-x 3 root wheel 102 29 Nov 21:09 FakeSMC.kext drwxr-xr-x 3 root wheel 102 12 Okt 22:02 Patched_10.7_AppleRTC.kext drwxr-xr-x 3 root wheel 102 12 Okt 22:02 VoodooBattery.kext drwxr-xr-x 3 root wheel 102 12 Okt 22:02 VoodooHDA.kext drwxr-xr-x 3 root wheel 102 12 Okt 22:02 VoodooTSCSync.kext drwxr-xr-x 3 root wheel 102 12 Okt 22:02 lspcidrv.kext /Extra.herve/Themes: total 0 drwxr-xr-x 70 root wheel 2380 13 Okt 11:24 Default /Extra.herve/modules: total 112 -rwxr-xr-x@ 1 root wheel 56136 12 Okt 22:16 FileNVRAM.dylib So to be clear, what you suggest I do now is: (sudo bash) rm /Extra/Extensions/* cp /Extra.herve/Extensions /Extra/Extensions cp /Extra.herve/org.chameleon.Boot.plist /Extra cp /Extra.herve/smbios.plist /Extra myfix -t "/Volumes/Mac OS X Lion" -q (reboot) Thanks Mike -
Startup hanging after EDP update and config on D430
mikewse replied to mikewse's topic in The Archive
I can see in Extra.backup folders that I've had AppleBCM5751Ethernet.kext previously, so I added that to /E/E, ran myfix -q, and rebooted. Still no network but now system settings say that network has no IP address instead of cable disconnected. -
Startup hanging after EDP update and config on D430
mikewse replied to mikewse's topic in The Archive
Comparing with your /E/E folder it looks like I am actually missing the keyboard and Ethernet kexts, right? -
Startup hanging after EDP update and config on D430
mikewse replied to mikewse's topic in The Archive
The contents of /Extra/Extensions after the build I just did on rev 679 (which is the only kind of build I can do without network) is: AppleACPIBatteryManager.ext AppleACPIPlatform.kext AppleIntelIntegratedFramebuffer.kext AppleSmartBatteryManager.kext AppleSmartBatteryManager2.kext FakeSMC.kext NullCPUPowerManagement.kext Patched_10.7_AppleRTC.kext SleepEnabler.kext VoodooBattery.kext VoodooPState.kext VoodooTSCSync.kext lspcidrv.kext (I typed this list manually so there may be typos) -
Startup hanging after EDP update and config on D430
mikewse replied to mikewse's topic in The Archive
Ok, so still not really there yet but now I boot without delay to graphical desktop. I had to use the existing EDP rev 679 as I didn't manage to get networking running. After doing the steps from previous posts I have the following remaining problems: keyboard and trackpad doesn't work (but I can use a USB keyboard/mouse) network isn't working (system settings say cable is disconnected but it's not) Should I change the procedure somehow considering I'm running rev 679, so I can update to latest and then do it all over again? -
Startup hanging after EDP update and config on D430
mikewse replied to mikewse's topic in The Archive
Ok, so to confirm I will do take these files from your /Extra: /Extra/org.chameleon.Boot.plist /Extra/smbios.plist /Extra/Extensions/FakeSMC.kext to my: /Extra/include/org.chameleon.Boot.plist /Extra/include/smbios.plist /Extra/include/Extensions/FakeSMC.kext and then run EDPWeb. I can see that GMA950 brightness fix is already selected, Does it all look good? (crossing fingers -
Startup hanging after EDP update and config on D430
mikewse replied to mikewse's topic in The Archive
Great, looking forward to hearing from you later then Your view on updates is very interesting to know more about. I have tried to stay up-to-date with new EDP versions thinking that it will improve over time. Usually I have done EDP update + build after every Apple Program Update, even if just iTunes is updated. But are you saying it is better not to update+build EDP? Having native SpeedStep sounds good. But these tweaks are not achievable through EDP settings and have to be manually added? Is there a list of interesting manual tweaks somewhere? Thanks for all help Mike -
Startup hanging after EDP update and config on D430
mikewse replied to mikewse's topic in The Archive
I will certainly not reboot until I feel as safe as I can :-S Yes, BIOS is A09. Default build options may be wrong you say? Very interesting - maybe this is what started the problems in the first place. As every time before I just accepted the defaults when doing the update that gave me the problems. I'm not fluent in what options are important. Could you help me and point out which ones could need tweaking? Best regards Mike -
Startup hanging after EDP update and config on D430
mikewse replied to mikewse's topic in The Archive
CPU is Intel Core 2 Duo U7600 1.2 GHz and it has 2GB RAM. Here's the output of lspci for the rest: 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01) 00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 01) 00:1d.0 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01) 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express (rev 02) I've managed to get back into the graphical desktop by: Copying the /Extra folder from another D430 I have access to Choosing the Boot Ignore Caches option on the boot splash screen Waiting about an hour while laptop showing black screen and sporadic disk activity Pressing a key to light up the screen So what is best to do now? Remove /Extra and /Applications/EDP.app and then do a new install+build of EDP? -
Startup hanging after EDP update and config on D430
mikewse replied to mikewse's topic in The Archive
Ok, so the reply in the other thread is that I need graphical desktop to install a fresh EDP and do a new build. What can I try to get back to my desktop? -
Reinstall EDP from command line in single-user mode?
mikewse replied to mikewse's topic in The Archive
Oh, ok, I thought it could be completely console based as older versions of EDP ran with a terminal interface. But maybe myFix is called upon, and needs the graphical desktop? I already have a "support thread" going under the Dell forums: https://osxlatitude.com/index.php?/topic/6059-startup-hanging-after-edp-update-and-config-on-d430/ so I'll hope for responses there then Thanks Mike -
mikewse started following Reinstall EDP from command line in single-user mode?
-
Startup hanging after EDP update and config on D430
mikewse replied to mikewse's topic in The Archive
I'm thinking this question may have interest for a wider audience than just Dell D4xx users, so I posted it here: https://osxlatitude.com/index.php?/topic/6065-reinstall-edp-from-command-line-in-single-user-mode/ -
An update made my EDP build unbootable. I can still log in to single-user mode with a text-mode console. The problems may be related to EDP directory changes so I'd like to start over from scratch, wipe out the current fixes, and install a fresh EDP. How to clean out old EDP? Is is enough to wipe everything in /Extra /Applications/EDP.app ? How to install new EDP? I have transferred the latest Install_EDP to the machine using a USB stick, but the installation uses the graphical desktop (Window Server) so nu luck there. How can I install EDP from the command line? How to run the build? After installation I will need to run the build with recommended settings for my system. In the old EDP this was console/script-based but this is now web-based. Can I still call on the build from the command line somehow? Thanks Mike Wilson
-
Startup hanging after EDP update and config on D430
mikewse replied to mikewse's topic in The Archive
Ok, so I have keyboard access again and have transferred Install_EDP to the laptop through a USB stick. When I try to run the install from the command line in single-user mode (text console, no graphic desktop) it complains about missing Window Server, as expected. So how can I update EDP in this stage? (Is it possible to trigger a headless EDP install?)