utendar

Thank you, found this on the issues page and the Sonoma preview version of airportitlwm is working.

Hello all,

 

I rebuilt my Ventura installation with Sonoma and all went well including Bluetooth. The only thing that is not working at the moment is Intel 8265 WIFI; I'm using the latest Ventura versions of AirportItlwm.kext alongside with Lilu and Opencore. I read here that some legacy Broadcom cards support were dropped but I have not seen mentions of Intel cards. Can someone verify that Intel WIFI should work and if not, steps to fix it? Thank you.

updated to OC 0.8.6 and still same issue.

Thanks, I added the files and populated config.plist but unfortunately issue persists.EFI_085 copy.zip

Here you go thanks.

EFI:

EFI_085 copy.zip

and Ioreg

 

Utendar_MacPro.zip

Update: I found some discrepancies in my USB mapping and rectified it. However, sleep still crashes the laptop and shutdown action result in system crash and reboot.

Brilliant, updated BlueToolFixup.kext and Bluetooth is now working, thanks!

 

One other issue I just discovered, when computer goes to sleep it actually shuts down with a crash message when turning back on. Any idea on how to go about resolving this?

Thank you. I corrected the kext to MPB14,1 as suggested. 

 

As it turned out, a couple of NVRAM resets and my Ventura installation continued and completed successfully. A couple of remaining issues:

1. Laptop reboot itself at login prompt. I had to install alpha version v2.2 of Airportltlwm.kext for Ventura and all seems well. Is there a stable version of v2.1 for Ventura?

2. Can't turn on Bluetooth. Both BlueToolFixup and IntelBluetoothFirmware are installed. Could this be related to USB mapping?

System Info for USB showing Bluetooth at location ID 14600000 

s

 

USBMap does not detect any device connected at that location (14600000) and port (6):

 

Under Bluetooth, it's listing a device I do not have (Broadcom?)

Ok per your advise, I changed the following:

1. Opencore verbose mode boot-args -v

2. Mapped USB ports using USBMap.kext, added entry to config.plist

3. Set XhciPortLimit to False

 

Unfortunately, the result is the same; black screen at 13%.

 

Please see attached updated EFI directory, thanks.

 

 EFI_085 Ventura copy.zip

Thank you Herve, I read through your posts in the archive section and that's how I got the iGPU settings. I was testing and tried commenting out sections to see if it made any difference (it didn't). Prior to installation I updated all the kext with Lilu-and-Friends; WhateverGreen is version 1.6.2. I attached my EFI minus wifi kext and resources directories.

 

Also checked SyncRuntimePermissions:

 

EFI_085 Ventura 2.zip

I have a fully functional Monterey 12.6.1 installation with below laptop:

 

Latitude 5480

OpenCore 0.8.5

i5-6300U 2.4 GHz (Skylake)

Intel HD 520

 

I tried updating config.plist to include below entries and started a clean Ventura installation. After formatting disk and starting installation, the progress bar stops at 13% then immediately black screen with no access to log file.

 

Please help, thank you.

 

1. GenSMBIOS to MacBookPro14,1

2. Skylake to Kaby Lake GPU spoofing:

 

 

I also tried this but same error:

 

 

Jake,

 

Thanks for that, your bootpack worked! Included IOReg in case you still want to see it.

Utendar_IOReg_Bootpack.zip

Thanks Jake, I was out of town and didn't get to this until now.

 

I took my original configuration and by following the following guide, created SSDT-GPIO.aml

https://dortania.github.io/Getting-Started-With-ACPI/Laptops/trackpad-methods/manual.html

 

Still no trackpad though, I don't need gesture just basic functionalities.

Utendar-IORegExp.ioreg

unfortunately same error on boot. I managed to get past the error by setting Misc -> Security -> SecureBootModel to "Disabled" but still no trackpad.

Adding HFSPlus.efi allowed USB to boot; thanks! The error "OC: Grabbed zero system-id for SB, this is not allowed" persists though, when using your EFI folder.

Thanks Jake, got error "OC: Grabbed zero system-id for SB, this is not allowed"

 

Also something strange, I'm trying to boot off of a USB stick and after selecting EFI I get a black screen. I tried and recreate the boot disk with Monterey and same thing.

here you go, thanks.

 

EFI-Utendar.zip

Tried updating to Opencore 0.7.5 but trackpad still not working, please assist; thanks.

 

PS Added IOReg file in case that helps.Utendar-IOReg.ioreg

I created a new thread since I started over on my build, only this time using Monterey. Everything went through smoothly but once again, no trackpad and the fixes I applied when using Big Sur is no longer working. I'm also using a newer kext (AlpsHID) per Opencore 7.4 instruction. Please assist, thank you.

You're right, I was messing around with multiple config files and mixed them up. The actual fix was from a a thread with similar Alps trackpad issues: see screenshot from muttonhead411: 

 

Thanks!

 

 

Added this patch and the trackpad is now functioning: https://dortania.github.io/Getting-Started-With-ACPI/Laptops/trackpad-methods/prebuilt.html

 

Thank you for your help!

Here you go, thanks

 

Utendar-IORegExp.ioreg

Added SSDT-TPDX.aml to ACPI directory and to config.plist but the trackpad is still not responsive.

Got sound working by following the Post-Install guide "Fixing Audio"; for others that have the same hardware:

PciRoot(0x0)/Pci(0x1F,0x3)

     layout-id <15000000>

 

Last hurdle is the Alps trackpad...I just need basic functions for now, thanks.

Thank you both! Disabling XhciPortLimit allowed booting and installed Big Sur. Everything seemed to have installed well except trackpad (Alps l2c) and audio (Realtek ALC3246). Any tips on how to proceed?