Piranha

Dr. Hurt , Is there away for me to make adjustments via a plist to the sensitivity when using the 2 finger scrolling ? I keep accidentally opening other things in the path while scrolling.

This didn't work for me on my V7, same as last beta. The last working version for me was R6B7 .

R6B8 -> v7 trackpad doesn't work for me either..

Driver report: V7 touchpad with ID: E7=0x73 0x03 0x0a, EC=0x88 0xb3 0x18 : EL Cap 10.11.6 The caps lock once pressed won't come out of caps unless I reboot, or change the keyboard caps lock modifier to something else. Everything else has got even better, like the pressure/sensitivity of the single tap needed to select an object, has greatly improved. Same with scrolling and not accidentally engaging other functions. Life is good! Thanks again.. Also the three fingers for mission control doesn't work.

Driver report: V7 touchpad with ID: E7=0x73 0x03 0x0a, EC=0x88 0xb3 0x18 : EL Cap 10.11.6 CAPS LOCK DOESN'T WORK. IT'S STUCK ON PERMA CAPS. SLEEP WORKS, EVERYTHING ELSE HAS IMPROVED, PERFECT. The three fingers for mission control doesn't work.

V7 Kind of the same result, intermittent. Works for a second then everything is kind of crazy. Cursor doesn't track with the actual location, touching pad acts like double click, starts to open anything on the desktop. Then cursor doesn't move at all, after a minute it would act normal for a second again.

No, but I can confirm that has happened to me as well. Sometimes the small keyboard shows and sometimes the full.

referencesHighlighting text is done using the drag gesture: double-tap (don't lift after 2nd touch) & swipe across text. > Accessibility > Mouse and Trackpad > Trackpad options > "with drag lock" Okay.. I think that pretty much solved everything for me ! : ) Except the caps lock.. which is not a big deal

Driver report: V7 touchpad with ID: E7=0x73 0x03 0x0a, EC=0x88 0xb3 0x18 : EL Cap 10.11.6 Secondary click : Fixed .. It's perfect !!!!!! Thanks! Left/Right click button area on touchpad: Still corner edge, finger tip-pad. Works, still very small area. It takes a bit to find the area when working. Highlighting text: Okay, I think I can bring to light some of what's happening with text selection: If you're trying to select an area of text. You initiate by holding down your "left click button", then with your "right finger" start selecting an area of text. When reaching a point where you need to re-adjust on the touchpad to grab more area, you lift your "right finger" up to reposition it drops all the previous selected text, even though you still have your "left click" still engaged the whole time. Right click menu, I guess not a real issue... I started using the 2 finger tap to open menu.. Caps Lock not working Thanks again for doing this!

Driver report: V7 touchpad with ID: E7=0x73 0x03 0x0a, EC=0x88 0xb3 0x18 : EL Cap 10.11.6 Huge improvement on secondary click : edit spoke too soon/still having some issues when using navigation. Seems like an improvement in sensitivity / accidental launch. Better than before. Maybe increasing the time between 1st and second taps ? Slight improvement on Left/Right click edge: Area has increased from fingernail on corner edge, to finger tip-pad at corner edge Selected Highlight still buggy, text spaces and end of paragraphs drop highlight. Drag and drop has dropping issues as well. However I’ve notice with drag and drop if I increase the speed in which I move selected items, the drag lock seems to hold. Just tested same with text selection as well, the increased rate of speed seems to overcome text spaces and hold the highlight. Still no Right click menu Caps lock not working Everything else great! Thanks ..

Follow up driver report: I’m very happy with what I have. The trackpad gestures the basic ones you referred in a previous post seem to all be working. The only things not working correctly is the right click, left click. My touchpad has no buttons, the click functions are pressing right and left corners of the pad, it actually depresses like a switch. They kind of work at the very, very edge of the corners using the very tips of my fingernail/fingers I can make it click to select and highlight text. So the left click function to select text works, but any breaks in the text, like the end of a paragraph or double spacing will not allow the highlight to go any further, and drops the highlight. The right click doesn’t bring up any menu functions like copy/paste etc. It just acts the same as the left click. I can select text or drag with it. Other than that the 2 fingers secondary click to open menus work great, but it's very sensitive. It opens accidentally quite a bit when using the 2 fingers navigation /scrolling of web pages. Could be I just need to get acclimated. update: The caps lock key doesn't work. Thanks again for your effort and hard work. It's hard to believe what a difference multitouch makes.

Go back into KextWizard filter "PS2" Highlight com.AppleACPIPS@Nub inside the loaded tab. Then at the bottom where it says "found" "5" click the little down arrow. It will open up a menu. Click on reveal.. It should open the folder where its hiding. Try all of them to see if your missing something. To me it appears you still have ApplesPS2 kexts still installed. If not try rebuilding/ repair. The dmesg log you posted, something is loading another copy of [email protected] Apple has one that needs to be deleted when installing a ps2 driver. Any other ps2 driver you install will have these inside them to emulate Apples. So it could be that another driver is causing a duplicate to load as well. Also my understanding is to remove any existing "ApplePS2Controller, VoodooPS2Controller, AppleACPIPS2Nub, ApplePS2Keyboard and old Touchpad" kexts if you've installed one in the past, before installing the new one.

Look in your system/library/extension folder and see if you have the file AppleACPIPS2Nub.kext If so remove it and try again. Make sure you have only 1 copy voodooPs2controller.kext in there as well. In fact you shouldn't have anything in that folder that has to do with PS2 in it. Only the voodooPS2controller your trying. If that fails: There are a couple of places depending on your installer another version of voodoops2controller could be hiding. Check the library/extension folder and the "extra" folder if there is one and EFI/clover/kext if there is one, depends if you used clover as your installer. Delete any other copies of VoodooPS2controller.kext if found in those locations.

Dr. Hurt you're a genius ! He got my touchpad working ! I'm the happiest man alive right now. Thank you! 11/16/16 5:15:40.000 AM kernel[0]: ALPS: Found a V7 touchpad with ID: E7=0x73 0x03 0x0a, EC=0x88 0xb3 0x18 11/16/16 5:15:40.000 AM kernel[0]: ALPS: TouchPad driver started...

Yes, Dinesh's will work on almost any system in enhanced mouse mode only. It's a lot better than just the basic mouse functions you get with say VoodooPS2contoller.kext at least on my system. The touchpad prefpane will load as well. You just don't get any multitouch. My IOreg is posted in an earlier post and it shows the ID as ALP000B. I've discussed this with others including Rehabman. He verified it as an ALPS. He did mention he might be getting an ALPS laptop, but he also said it may not be ps2 because newer systems are moving to I2C. Side note: He also has updated his latest VoodooPS2contollers because some Synaptics didn't give ID's, something along those lines. Might be related ? He also added something new that corrected for the systems like I have. Something to do with the probook-87 id?